







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Sachse, TX: What It Takes and What It Costs
Door installation in Sachse typically runs $350 to $1,200 per door installed, with most single exterior door swaps landing around $600 to $850 including the door, hardware, and trim work. A straightforward interior door replacement takes one day; an exterior entry with rot repair or a widened rough opening runs two to three days. Call (888) 426-8078 and we’ll walk your actual opening before anyone quotes a number. Estimates are free and the price in writing is the price you pay.
How the work actually runs, stage by stage

Door installation isn’t one task. It’s a sequence, and skipping a stage is how you end up with a door that sticks every July. Here’s what happens on a real job.
Stage 1: Measure and site check (day 1, about 60 – 90 minutes)
We measure the rough opening, check the wall for plumb and square, and look at the sill and threshold. On Sachse slabs this matters more than it sounds. If the opening is out of square by more than a quarter inch, we plan for shimming and possibly framing correction before the new door ever comes off the truck. You decide the door style and swing direction at this visit.
Stage 2: Demo and inspect the opening (day 1, 1 – 2 hours)
Old door and trim come out. We expose the framing and check for rot, water staining, and failed flashing. In homes from the 1980s and 1990s, we regularly find soft sill plates on south- and west-facing entries because North Texas sun and storm-driven rain work those faces hardest. If rot is there, you get a photo and a written add before we touch it.
Stage 3: Framing correction and flashing (day 1 – 2, 2 – 4 hours)
Rough opening gets squared, shimmed, and fastened. Flashing and sill pan go in before the door. This is the step that gets skipped by crews working too fast, and it’s the reason water shows up at the threshold two winters later. You don’t have to decide anything here, but you should ask to see the flashing before the door goes in.
Stage 4: Setting the door and hardware (day 2, 3 – 5 hours)
Door goes into the opening, gets plumbed and leveled, and is anchored per the manufacturer’s instructions. Hinges, lockset, deadbolt, and any glass inserts go in. Interior and exterior trim get fit and nailed. You’ll confirm hardware finish and handle style at this point if it wasn’t locked in earlier.
Stage 5: Finish, seal, and walkthrough (day 2 – 3, 2 – 3 hours)
Caulk, paint touch-up where needed, and a final operation check: door swings clean, latch catches, weatherstrip seals all the way around. We walk it with you, demonstrate the lock and any multi-point hardware, and hand over the written workmanship guarantee. The whole thing lands under the 730-Day Done Right Promise, so if the door drags or leaks in the first two years, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Most of the decisions on a door project are made before we show up. Here’s the honest read on each.
- Steel entry doors: the most common pick for Sachse exteriors. $400 – $900 for the door alone. Holds up to heat and humidity better than solid wood, resists warping, and takes paint well. Trade-off: dents from a hard hit and can rust at the bottom edge if the sill isn’t right.
- Fiberglass entry doors: $600 – $1,400. Looks like wood, doesn’t rot, and handles the seasonal swing from humid spring to dry August without moving much. Costs more up front. Best for homeowners who want a wood look without the maintenance.
- Solid wood doors: $800 – $2,000+. Beautiful, heavy, and the most vulnerable to our climate. Needs a covered porch or deep overhang and disciplined sealing. We install them, but we tell you the maintenance reality first.
- Interior hollow-core: $150 – $350 installed. Fine for closets and bedrooms. Hollow, light, and easy to replace.
- Interior solid-core: $300 – $600 installed. Quieter, feels substantial, holds up to kids and dogs. Worth it in bedrooms and home offices.
- Patio and slider replacements: we handle these as part of a wider door scope, and they connect to our Windows & Doors work when the whole opening is being rebuilt.
Brand matters less than the fit. We work with door systems from makers like Dvele and Plant Prefab on pre-hung assemblies where the frame and door come matched from the factory, which takes a lot of the guesswork out of alignment.
What Door Installation costs in Sachse, TX

Expect $350 to $1,200 per door installed. That range holds for most standard openings. Here’s what moves a job to the low or high end.
- Door type and material: an interior hollow-core at $150 – $350 sits at the bottom; a fiberglass or wood entry door with glass runs $900 – $1,400.
- Existing opening condition: a clean, square opening is quick. Rot repair, out-of-square framing, or a missing sill pan adds $150 – $500.
- Size and configuration: a standard 36-inch single door is baseline. Double doors, sidelites, and transoms push toward the top of the range.
- Hardware grade: basic builder lockset vs. a keyed deadbolt and multi-point system is a $50 – $300 difference.
- Exterior finish work: trim, paint, and caulk on an exterior door add $100 – $250 if not already in the quote.
A written estimate from us includes the door, hardware, framing correction, flashing, trim, sealant, and cleanup. It does not include structural changes to widen an opening, which needs its own scope and sometimes a permit. If the work is part of a full Windows & Doors in Sachse project, we price it together so you see the whole number at once.
See the difference
Before
After
Before
After
Before
AfterWhat Sachse homes specifically do to this job
Sachse sits on Blackland Prairie clay, and that clay is the reason door work here isn’t the same as door work on sandier ground to the west. The soil holds moisture through the winter and cracks open in summer, and the slab moves with it. A door that fits perfectly in March can drag by August once the foundation shifts a fraction and the opening goes out of square. We see this most on west-facing entries and on two-story homes where the load above the opening is heavier. On slab-on-grade homes, a door that suddenly sticks is often the first sign of foundation movement, and we’ll flag it rather than shim it and walk away. If you’re seeing stair-step cracks in the brick veneer near the door, that’s a foundation conversation, not a door conversation.
Most of the housing here went up between the 1980s and the 2000s, so we’re regularly working original builder-grade doors that have been through 30-plus North Texas summers. Those units often have failing weatherstrip, sagging hinges, and a threshold that’s lost its seal. Permits for a straight door replacement usually aren’t required, but structural changes to the opening can trigger one, and we pull what’s needed and stand behind the inspection. If your project also involves fencing, homeowners often pair this with Chain Link Fence in Sachse or Vinyl Fence in Sachse while we’re already on site. We cover the full Sachse area, including neighborhoods off Sachse Road and the stretches bordering Rowlett, Garland, Wylie, and Lucas.
Serving Sachse, TX – Our Local Coverage Area
We serve Sachse and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Door Installation in Sachse

A single interior door takes about half a day; a single exterior entry takes one full day. A whole-house interior door replacement of six to eight doors usually runs two to three days. Call (888) 426-8078 for a scheduling window that fits your week.
Replacing a door in the existing opening generally doesn’t require a permit. Widening an opening, adding a new exterior door, or changing structural framing usually does. We tell you which side of that line your job falls on before we start, and we pull the permit when one is needed.
Yes, in most cases. A same-size replacement in the existing rough opening is a finish-level job with no plumbing or structural work. The exception is an opening that’s out of square or water-damaged, where framing correction is part of the scope. We identify that at the measure visit so there are no surprises mid-job.
Most jobs land between $350 and $1,200 per door installed, with a typical exterior entry around $600 to $850. The high end covers fiberglass or wood entries with glass, rot repair, or double-door configurations. Call (888) 426-8078 for an exact quote; estimates are free.
Every door we install is covered by the 730-Day Done Right Promise. If the door doesn’t swing right, leaks at the threshold, or fails in any way we caused, we come back and fix it. The manufacturer’s warranty covers the door unit itself; ours covers the installation.
Get a free estimate for Door Installation in Sachse
Tell us the door, the opening, and when you want it done. We’ll send someone out to measure, check the framing, and hand you a written line-item quote that covers door, hardware, flashing, trim, and cleanup, with no change orders once work starts. Financing at 0% for 18 months is available, and there’s $1,000 off any project over $10,000. Call (888) 426-8078, seven days a week, and a real person picks up.
Written by the team at Groundwork Construction Co.












