







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in Rockwall, TX: What It Costs and How Long It Takes
A wrought iron fence in Rockwall, TX typically runs $3,500 – $9,000 for a standard residential run, with most single-family jobs landing around $5,200 for 120 – 150 linear feet of 4-foot ornamental steel with a powder-coat finish and one walk gate. Plan on 2 – 4 weeks from signed contract to final walkthrough: about a week for fabrication, 2 – 4 days on site for excavation and setting, and a cure window before gates hang true. Call (888) 426-8078 for a free on-site estimate with a written, line-item quote.
How We Build an Iron Fence in Rockwall, Start to Finish

Ornamental iron isn’t a stock-and-staple product like wood or vinyl. Each run is measured, cut, welded and coated for your specific grade change, which is why the sequence matters more than the sales pitch. Here’s what actually happens.
Stage 1: Site measure and layout (day 1, about 90 minutes)
We walk the property line with you, confirm where the fence sits relative to your plat and any utility easements, and flag grade changes. Rockwall lots along the lake slopes rarely sit flat, so this is also where we decide racked panels versus stepped panels. You decide the gate locations and swing direction at this stage, and we mark the corners with paint.
Stage 2: Custom fabrication (5 – 7 business days)
Panels, posts and gates are cut, welded and sent for powder coating. This is the part homeowners underestimate. There’s no truck stocked with your exact 6-foot panel, so five to seven days is realistic and rushing it means skipping the coating cure. You’ll sign off on the final panel count and gate hardware before the shop releases the order.
Stage 3: Utility locate and excavation (day 1 on site)
We call for the Texas 811 locate and wait the required window before any shovel hits ground. Posts go in 24 – 36 inches deep, depending on frost line guidance and soil conditions, set in concrete footings. On a 150-foot run, expect a full day of digging and setting, more if we hit caliche or an old pier-and-beam footing.
Stage 4: Setting, leveling and hanging (days 2 – 3)
Posts cure for 24 – 48 hours before panels hang. Then we set panels, square the gates, and check every hinge and latch for swing. This is the stage where most “cheap fence” jobs go wrong: skimped footings, unlevel panels, gates that drag by month three. We check all of it before we call you out.
Stage 5: Final walkthrough and touch-up (day 4)
We walk the run with you, touch up any nicks in the coating, verify the gates latch clean and swing without dragging, and hand over the written 730-Day Done Right Promise. If anything fails in those 730 days, we make it right, not just talk about it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on an Iron Fence
The word “iron” is doing a lot of work in the fence industry. Real wrought iron is largely gone from residential work. What you’re actually buying is one of three products, and each carries a different price and lifespan.
- Powder-coated steel ornamental: The workhorse of the category. $32 – $48 per linear foot installed. Holds up well against North Texas sun and clay-soil movement. Powder coating resists chipping far better than paint. This is what most Rockwall homeowners choose.
- Galvanized steel with a zinc-rich primer: $38 – $55 per linear foot. The coating matters most where lakeside humidity is constant. Full hot-dip galvanizing before powder coat costs more upfront but adds years along the water corridors near Chandler’s Landing.
- Aluminum ornamental: $28 – $42 per linear foot. Lighter, rustproof, easier to move. Doesn’t carry the same heft as steel and can bend under a hard hit. A reasonable choice for a decorative front-yard run or a homeowner worried about long-term corrosion.
- Real wrought iron: $75+ per linear foot, custom-forged. Beautiful and rare. The cost-to-benefit comparison only makes sense on heritage properties or specific designs.
- Finish upgrade (matte black vs. satin bronze vs. custom color): Adds 5 – 15% to the job. Most homeowners stick with matte black.
What an Iron Fence Costs in Rockwall, TX

Rockwall iron fence projects run $3,500 – $9,000 for typical residential installations, and most sit right around $5,200. The lead range reflects that almost every Rockwall lot has something that pushes the number.
Five variables drive the low-to-high swing:
- Linear footage and height: A 4-foot run over 120 feet prices differently than a 6-foot run over 200 feet. Height adds material and footing depth.
- Gate count and hardware: Each walk gate adds $400 – $900. Drive gates, self-closing hinges and magnetic latches push the number higher. Decorative scrollwork adds cost by the linear foot.
- Grade and terrain: Stepped panels and racked panels cost different amounts of labor. Hillside lots on the Blackland Prairie slopes take more setting time.
- Existing fence and site prep: Removing an old wood or chain link run adds $300 – $700. Concrete, rock or old footings slow the crew.
- Material grade: The gap between basic powder-coated steel and full galvanized with a zinc primer is roughly 20% on the total job.
Every written estimate includes: material, powder coat, concrete footings, utility locate coordination, haul-away of old material, and the 730-Day Done Right Promise. Excludes: landscape restoration beyond basic rake, custom scrollwork added late, and any concrete cutting not flagged at measure. You get exactly what we quote, no change orders on the standard scope.
See the difference
Before
After
Before
After
Before
AfterWhat Rockwall Homes Do to an Iron Fence Job
Rockwall sits entirely around Lake Ray Hubbard, and that fact runs through every iron fence we build here. Along the shore streets of 75032, the humidity off the lake and the wet-dry swing of the Blackland Prairie clay work together: coatings fail faster near the water, and shifting soil puts more load on post footings than inland subdivisions ever see. Down in Stone Creek and Chandler’s Landing, we’re often working around 1990s and 2000s brick-and-stone builds where the original iron has been in place 20+ years, and we’re pulling rusted pickets out of concrete footings that were never set deep enough. On the older pier-and-beam lake cottages, we frequently find the fence line crosses a drainage path where water pools against the posts after a hard rain, and that shortens the fence’s life more than any coating failure. We set deeper footings on those runs and add a small drainage correction. If your project grows into a wider rebuild, that work ties into Fence Installation in Rockwall we do across the Rockwall area, and homeowners often pair this with Patios, Walkways & Pool Decks in Rockwall when the yard is getting a full reset. Every iron fence quote from us is built off our Fence Installation service, and if you’re adding a detached structure on the same property, ADU Design & Permitting in Rockwall covers that side of the work.
Serving Rockwall, TX – Our Local Coverage Area
We serve Rockwall and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Iron Fence in Rockwall

A typical Rockwall iron fence takes 2 – 4 weeks from signed contract to final walkthrough, with 3 – 4 days actually on site. The bulk of that timeline is fabrication and powder-coat cure, which can’t be rushed without shortening the fence’s lifespan. Call (888) 426-8078 to schedule a measure.
Most residential iron fences in Rockwall fall under the city’s fence height and setback rules and don’t require a building permit, but corner lots, HOA subdivisions and any run within Corps of Engineers shoreline jurisdiction near Lake Ray Hubbard can require a review. We confirm the requirement on your specific lot before the crew shows up. Call us for the exact scope on your property.
Yes. Fence footings sit 24 – 36 inches deep, well clear of typical plumbing, gas and irrigation lines running to the house. We coordinate the Texas 811 locate before digging, and if a footing hits a sprinkler line or landscape drain, that gets flagged in the measure stage. Call (888) 426-8078 with your plat or survey handy and we’ll walk it with you.
Powder-coated steel runs $32 – $48 per linear foot installed, aluminum runs $28 – $42, and a full galvanized-plus-primer install sits around $38 – $55. Total projects in Rockwall land between $3,500 and $9,000. Call (888) 426-8078 for an exact quote, and estimates are free.
No. Our upfront pricing means the number on the written estimate is the number you pay, provided the scope hasn’t changed on your end. Adds, like a second walk gate or custom scrollwork, get quoted and signed before we touch the job. Call (888) 426-8078 to book the measure.
Get a Free Iron Fence Estimate in Rockwall
Call (888) 426-8078 to schedule a free on-site estimate for your iron fence in Rockwall. A real person answers 24/7, we walk the property line with you, and you leave with a written, line-item quote covering material, footings, coating and the 730-Day Done Right Promise. No pressure, no vague numbers, no surprise costs later. Projects over $10,000 qualify for $1,000 off, and 0% financing for 18 months is available.
Written by the team at Groundwork Construction Co.












