







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in Heath, TX: What It Takes and What It Costs
A wrought iron fence on a Heath, TX lot typically runs $3,500 – $9,000, with most projects landing in the middle of that band, and the finished install usually takes three to five working days once materials are on site. On acre-plus wooded parcels, expect a week of prep before a single picket goes up, because grading and drainage have to be settled first. Call (888) 426-8078 for a free on-site measurement and a written, line-item price.
How an Iron Fence Goes In, Stage by Stage

Iron fence work rewards precision, and precision starts before anyone touches a shovel. Here’s the sequence we follow on a Heath job.
Stage 1: Walkthrough and Layout (Day 1)
We mark the property line against the plat and confirm setbacks with any HOA or lakefront covenants that apply. On wooded Heath lots, this is also where we flag which trees to protect and where the fence line needs to jog around existing drainage swales. You decide on fence height, gate placement and picket spacing at this stage, since those choices drive the estimate. Plan on two hours for the walkthrough on most properties.
Stage 2: Trenching and Post Setting (Days 2 – 3)
Posts get set in concrete footings spaced to the panel layout, typically every 6 to 8 feet. North Texas clay doesn’t hold footing depth the way sandy soil does, so we dig past the frost line into stable material and let the concrete cure a full 24 hours before hanging weight on the posts. This is the slowest part of the job and the part that most determines whether the fence stays plumb for 20 years.
Stage 3: Rails and Panels (Days 3 – 4)
Top and bottom rails get welded or bolted to the posts, then panels are fitted and leveled. On custom ornamental designs, decorative finials, scrollwork or arched gate tops are set at this point. You’ll want to walk the line with us and approve the final panel alignment before we lock everything in.
Stage 4: Gates and Hardware (Day 4)
Driveway gates and pedestrian gates hang here. Self-closing hinges, latches and any automation get installed and tested. If you’re adding a gate operator, this is the day the electrical run matters, so if the gate location is near the house, coordinate with your electrician beforehand.
Stage 5: Final Level, Touch-Up and Punch List (Day 5)
Every post gets checked with a level, weld joints get inspected, and any scuffs on the finish get touched up. You walk the fence with us and sign off. Anything that needs a second look gets added to a punch list and handled within the week.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on a Heath Iron Fence
On a custom or semi-custom Heath home, the iron fence is a long-horizon decision, so it’s worth understanding the real trade-offs.
- Wrought iron vs. powder-coated steel vs. aluminum: True wrought iron is the heaviest and longest-lived, and the most expensive. Powder-coated steel sits in the middle on cost and is the strongest option per dollar for most residential work. Aluminum mimics the look at a lower price and won’t rust, but it dents and doesn’t carry the same weight.
- Picket spacing and height: 4-foot fences with wider spacing suit ornamental front-yard use. 5- and 6-foot with 4-inch spacing are typical for full property perimeter, pool safety and pet containment. Tighter spacing and taller height both push the price up.
- Finish: Standard black powder coat is the workhorse. Custom colors, bronze or antique finishes cost more and take longer to source. On a lakefront lot, we recommend a finish that handles humidity well, since Lake Ray Hubbard moisture and shade combine to accelerate corrosion on bare steel.
- Gate style: Manual swing, self-closing, or automated. Automation adds meaningful cost but is often the deciding factor on a larger property where walking to the gate isn’t practical. Sliding gates cost more to install than swing gates and need clear swing-free space.
- Decorative elements: Finials, scrollwork, custom gate crests, and matching gate posts. Every detail adds time and money, and the aesthetic has to line up with the house design.
What Iron Fence Costs in Heath, TX

Here’s the honest planning range for an iron fence in Heath: $3,500 – $9,000, all in, for typical residential perimeter work. That span is wide because five variables move the number.
- Linear feet. A half-acre perimeter is roughly 400 feet. An acre-plus is 700 feet or more. Volume drives the price more than anything else.
- Material grade. Powder-coated steel sits mid-range; true wrought iron runs higher. Aluminum is the low end of the ornamental look.
- Existing conditions. On a wooded parcel, tree-root removal, brush clearing, or addressing a failed retaining wall adds cost. On a flat, cleared lot, the number stays closer to the floor.
- Gates and automation. A single driveway gate plus operator can push toward the high end on their own.
- Permit scope and engineering. A residential fence is usually straightforward, but on floodplain-adjacent parcels along the lake, the city may ask for drainage or grading review, and that adds time and cost.
A written estimate from us lists linear feet, post spacing, footing depth, material spec, gate count, hardware, finish and any site prep line by line, so you can see exactly what’s moving the price. What it doesn’t typically include: landscape restoration beyond the fence line, utility relocation if a line sits where a post must go, or an electrician’s work for a gate operator. We’ll flag those separately before work starts so there’s no surprise. The number you see is the number you pay, and the whole install is backed by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Heath Homes Specifically Do to Iron Fence Work
Heath is a lakefront suburb where the fencing work looks different than it does in Rockwall or Fate. The parcels along Lake Ray Hubbard are frequently wooded and floodplain-adjacent, so we regularly find that a fence line has to thread around Corps of Engineers restrictions, tight setbacks, and preserved trees, and sometimes the grade changes within 20 feet. On the bluff-side properties, we spec footings deeper and add a retaining detail behind the posts so the fence doesn’t creep as the clay moves. Most of the housing stock we work on sits on acre-plus lots with 3,000+ sq ft homes, many newly built, some 1970s – 90s ranch-style. On the newer builds, we’re often the second or third contractor after a pool and outdoor living area, and the fence has to match a design language that was set by the pool builder. On the older ranch homes, we’re more often correcting a fence line that was set decades ago without survey confirmation. If your project is part of a full Fence Installation in Heath plan, this is the page that explains the iron portion. We cover the entire 75032 ZIP and coordinate with the city on permits, and if you’re pairing this with outdoor living work, many Heath homeowners pair it with Patios, Walkways & Pool Decks in Heath or an extension project like ADU Design & Permitting in Heath.
Serving Heath, TX – Our Local Coverage Area
We serve Heath and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Iron Fence in Heath

Most residential iron fence jobs in Heath take three to five working days on site, plus one to two weeks of lead time for material delivery on custom picket patterns or finishes. On wooded or sloped parcels, add two to four days of prep for grade work. Call (888) 426-8078 for an exact timeline once we’ve walked the property.
Heath generally requires a permit for residential fences, and the review process checks height, setback and any HOA or lakefront covenant restrictions. If the fence is on a floodplain-adjacent lot or crosses a drainage easement, the review may add a drainage or grading step. We pull the permit and manage inspection on your behalf.
In most cases yes, especially if we know about the pool, irrigation lines and buried utilities before we trench. We locate utilities first, route posts around preserved trees, and hand-dig where a machine would harm roots or a pool deck. Anything that can’t be avoided gets flagged in the estimate before we start.
Expect roughly $18 – $35 per linear foot installed, which is how a typical half-acre job lands inside the $3,500 – $9,000 total range. Gate count, finish and site conditions can push the per-foot number higher. Call (888) 426-8078 for a free, line-item estimate tailored to your property.
Our workmanship on your Heath iron fence is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right, for two full years. Material warranties come from the manufacturer and vary by product. Ask us for the specific warranty terms on the material you’re considering before you sign.
Get a Free Iron Fence Estimate in Heath
If you’re planning an iron fence on a Heath property, the next step is a free on-site estimate. We’ll walk the line with you, measure the perimeter, flag any tree, drainage or setback issues, and hand you a written, itemized price the same visit. No surprises, no vague “starting at” number. Call (888) 426-8078 to schedule, and a live person will pick up. You can also see the broader Fence Installation service and the Heath area page for what else we handle.
Written by the team at Groundwork Construction Co.












