







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Balch Springs, TX: What the Job Actually Involves
A paver driveway in Balch Springs runs $7,000 to $18,000 for most single-car and standard two-car jobs, and takes four to seven working days from tear-out to the last sweep of sand. The work is straightforward: pull the old surface, rebuild the base to handle this region’s clay, set the pavers, and lock them in. Call (888) 426-8078 and we’ll walk your drive and give you a written number before anything is ordered.
What surprises most folks is that the pavers themselves are only part of the cost. The base layer and edge restraint do the structural work, and on Balch Springs soil that base is where a driveway either lasts twenty years or starts heaving after two summers.
How We Build a Paver Driveway, Stage by Stage

We’ve laid enough driveways to know that the order of operations matters more than the rush. Here’s the sequence you can expect, and what you’ll have a say in at each point.
Stage 1: Demo and haul-off (day one)
We remove the existing concrete, asphalt, or old pavers using a machine breaker where access allows and hand tools near the house, gas meters, and utilities. A typical Balch Springs driveway produces three to six dump-truck loads of debris. You decide up front whether any of the old concrete gets hauled to a recycling yard or stays on your property as fill for a low spot.
Stage 2: Excavation and subgrade prep (days one and two)
We dig down six to ten inches and grade the subgrade away from the house at roughly a 2% slope. On blackland clay, that excavation has to reach stable material or get over-excavated and recompacted. We roll the subgrade with a plate compactor and check it for soft spots. This is the stage where a wet spring slows everything down, and it’s the stage we refuse to rush.
Stage 3: Base and edge restraint (days two and three)
We install four to six inches of crushed limestone base, generally grade 1 or road base, in lifts and compact each lift with a vibratory plate. Then we set the edge restraint: a rigid aluminum or steel edge pinned with spikes, which is what keeps the field from spreading outward under turning tires. You’ll pick the edge style and whether the border course sits flush or stands proud. This is also the day the driveway starts looking like a driveway, which tends to ease the mid-project nerves.
Stage 4: Setting the pavers and cutting in (days three through five)
We screed a thin sand bedding layer, then lay the field in your chosen pattern, working off a string line so the joints stay tight and consistent. Cuts along the house, walkway, and curb get made with a wet saw. A typical two-car Balch Springs driveway uses somewhere between 350 and 500 square feet of paver per bay depending on the layout, and the cut work is where the crew’s experience shows.
Stage 5: Compaction, sand, and cleanup (days five through seven)
We run a plate compactor over the finished field with a pad, then sweep polymeric sand into the joints and mist it to activate. You’ll get a walkthrough, an explanation of how to top off sand in a year, and a sweep of the site. Most jobs finish in a single week, and the driveway is drivable again the moment the sand sets.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
The pavers themselves are where buyers get paralyzed, so here’s the honest trade-off on the main choices.
- Concrete pavers: The workhorse option and where most Balch Springs jobs land. Dense, freeze-resistant, and easy to repair one section at a time if a limb drops on it. A standard 60mm thickness handles a residential drive; step up to 80mm if you park a heavy truck on it regularly.
- Clay brick pavers: Richer color up close and a classic look that suits the older ranch homes in town, but pricier per square foot and heavier to install. Worth it if the house has brick detailing you want to match.
- Permeable pavers with open joints: These let water pass between them into the base. Good for a low corner of the lot where water pools, and the joints take longer to fill and keep filled.
- Pattern runs: Herringbone is the toughest under turning wheels and the most common choice for a drive. Running bond is cheaper to lay and reads calmer from the street. Basketweave looks sharp but costs more in labor because of the cut count.
- Border and accent courses: A soldier course around the perimeter locks the field visually and adds a tidy frame. Adds material and a day of labor.
- Color and finish: Standard gray or red is the budget end; color-blended and tumbled finishes cost more and hide tire marks better.
We source paving through established hardscape brands such as Belgard when a specific color or texture match matters, and we’ll show you physical samples before you commit. Don’t pick a color off a phone screen.
What Paver Driveways Cost in Balch Springs, TX

Paver driveway installation in Balch Springs typically runs $7,000 to $18,000, and that spread comes down to five real variables.
| Line Item | Typical Range |
|---|---|
| Standard paver driveway installation | $7,000 – $18,000 |
| Base repair or over-excavation for clay | adds $500 – $2,500 |
| Border course / accent pattern | adds $400 – $1,200 |
| Old surface demolition and haul-off | $600 – $1,800 |
| Grading to fix a drainage low spot | $300 – $1,100 |
Size is the first lever: a single-car apron is a fraction of a full two-car drive. Existing condition matters next, because a cracked slab that comes out clean and easy is cheaper to replace than a driveway sitting on soft, saturated clay that needs extra base. Material grade pushes you toward the top of the range when you choose clay brick, tumbled finishes, or a premium border. Pattern adds labor through extra cuts. And drainage corrections are their own line, since a driveway that pitches toward the house has to be regraded, not just overlaid.
A written estimate from us lists every one of these as a line item, and the number you see is the number you pay. What’s typically not included: moving landscape beds, removing a tree, or repairing foundation issues underneath. We’ll tell you up front if any of those are in play. Call (888) 426-8078 for a free estimate and a line-item quote.
See the difference
Before
After
Before
After
Before
AfterWhat Balch Springs Homes Specifically Do to This Job
Balch Springs sits on Texas blackland prairie, and that clay is the reason this job is handled differently here than a few miles east. Expansive clay shrinks and swells hard through our wet-dry cycles, and a driveway built with a thin base on that soil will heave and settle within a couple of seasons. Contractors around here routinely see it: after a heavy rain, pier-and-beam homes in older neighborhoods near 75180 shift and settle, and the same active soil is working on whatever sits on top of it. That’s why over-excavation and proper compaction aren’t optional for a paver drive in this city.
Much of the housing stock here is mid-century to 1970s single-story ranch homes, and many driveways are the original concrete from that era. We’re often tearing out a slab that has cracked at the seams, and sometimes we’re working around original plumbing routed under the driveway, which has to be located before a machine goes in. Our hot, humid summers and periodic heavy rain also mean the base has to drain well or you’ll get washouts at the edges. If the drive ties into a full yard rebuild, this is part of a Driveway & Pavers in Balch Springs project that can include matching walkways and patios so the whole approach reads as one design.
Permits are usually handled through the city for grading or right-of-way work, and we pull what’s required and stand behind the inspection. If you’re planning a rear addition with a new approach, homeowners often pair this with ADU Design & Permitting in Balch Springs or a Garage Conversion ADU in Balch Springs, and we’ll coordinate the driveway layout with the rest of the plan. Our Driveway & Pavers service covers all of it, and we’re proud to serve homeowners across Balch Springs.
Serving Balch Springs, TX – Our Local Coverage Area
We serve Balch Springs and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Balch Springs

Most paver driveways in Balch Springs take four to seven working days from demo to the final sand sweep. A single-car apron can land in three; a large two-car drive with border and accent work can stretch toward eight. Weather is the wild card, since a soaked clay subgrade has to dry before we set base. Call (888) 426-8078 to get a timeline for your specific driveway.
In most cases a straightforward paver driveway does not need a building permit, but any work in the city right-of-way, a new curb cut, or significant regrading to change drainage does. We pull what the city requires and handle the inspection so you’re not chasing paperwork. Call (888) 426-8078 and we’ll tell you exactly what your project needs.
You can overlay pavers on sound concrete, but on Balch Springs clay we don’t recommend it as a shortcut. A slab that’s already cracked will telegraph those cracks through the pavers, and you’d be compacting new base on top of an uneven surface. Full removal lets us build the base correctly. Call (888) 426-8078 and we’ll look at your slab and tell you honestly which path makes sense.
Paver driveways in Balch Springs run $7,000 to $18,000, while a concrete driveway typically lands around $4,500 to $12,000. Pavers cost more up front but can be repaired a section at a time instead of replaced whole, and they hold up better to clay movement. Call (888) 426-8078 for a free estimate so you can compare real numbers.
Every paver driveway we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers our workmanship, and the paver manufacturer’s own warranty applies to the material. The base and edge restraint are where most failures happen, and those are on us. Call (888) 426-8078 to schedule a free estimate and a written quote.
Get a Free Paver Driveway Estimate in Balch Springs
Call (888) 426-8078 and a live person answers, day or night. We’ll schedule a free on-site estimate, walk your driveway, talk through pattern, color, and drainage, and leave you with a written line-item quote. No pressure, no vague pricing, no surprises once the work starts. Our technicians have up to 12 years of experience, and we back the work with a 730-Day Done Right Promise. Balch Springs drives are what we do.
Written by the team at Groundwork Construction Co.












