







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Sunnyvale, TX: What the Job Actually Involves
A paver driveway in Sunnyvale, TX runs $7,000 – $18,000 for most homes, and a typical installation takes 4 to 7 working days from demo to the final sweep of polymeric sand. That covers excavation, a compacted aggregate base, edge restraints, the pavers themselves, and a plate-compacted finish. Call (888) 426-8078 for a free on-site estimate, and we’ll tell you which number in that range your driveway lands on and why.
How We Build a Paver Driveway, Stage by Stage

Paver work lives or dies on what happens under the stones. Here’s the real sequence, with the time each stage takes and the decision that lands on you.
Stage 1: Layout and demolition (Day 1)
We mark the final grade, pull string lines, and confirm slope away from the garage and any outbuilding before a single shovel moves. Existing concrete or asphalt comes out and hauls off the same day. You decide the paver pattern and lay direction here, because the pattern changes how we set the starting edge. This is also when we confirm drainage falls toward the street or a swale rather than pooling at the slab.
Stage 2: Excavation and base prep (Days 1 – 2)
We excavate to a depth that fits the base, bedding sand, and paver thickness, typically 8 to 12 inches total. The base goes in lifts of 2 to 3 inches, each compacted with a plate compactor and checked for grade. On the acreage lots east of town this stage takes longer, because the expansive clay has to be cut and re-compacted correctly or the whole pad moves after the first hard rain.
Stage 3: Edge restraints and bedding (Day 3)
Concrete or steel edge restraints go in along both sides and the apron, anchored into the base, not just spiked to the surface. A 1-inch bedding sand layer gets screeded flat. Edge restraint is the single most-skipped step in cheap paver jobs and the reason driveways fan out at the corners within two summers. You’ll see us set it before any paver goes down.
Stage 4: Paver installation and cutting (Days 3 – 5)
Pavers lay from a locked starting course, with cuts made by wet saw at the aprons and any curves. On a 3-car drive of 900 to 1,200 square feet this is two to three days of steady work. You confirm the accent band or border color here if you’re using one to break up a long run.
Stage 5: Compaction, sand, and cleanup (Days 6 – 7)
We run a plate compactor over the finished surface with a poly pad, sweep polymeric sand into the joints, mist it to activate, and compact again. Drive on it after 24 hours. You get a walkthrough of the drainage, the edge restraint, and what to do before the first freeze.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the decisions come down to material, thickness, and finish. Each one trades cost against longevity in a specific way.
- Concrete pavers (interlocking). The standard choice and the one that fits the $7,000 – $18,000 range. Molded, high-compressive-strength units in a range of colors and shapes. The trade-off: individual stones can crack under heavy loads, but they swap out without tearing up the drive.
- Clay brick pavers. Warmer color, holds up well to North Texas sun, and ages with character. Costs more per square foot than concrete pavers and is heavier to install. Suits the custom and semi-custom homes where the entry is a design feature.
- Permeable pavers with open joints. Slotted units over a drainable base that let water move through. Worth the extra cost on lots where runoff toward the street or a neighbor is a real problem. Needs periodic vacuum sweeping to keep the joints open.
- Thickness: 60mm vs. 80mm. Most residential drives use 60mm pavers. On a driveway that takes a heavy truck, trailer, or barn equipment, 80mm pavers over a deeper base hold up noticeably better.
- Finishes and borders. Tumbled, chamfered, or smooth-faced; single color or a contrasting soldier course around the perimeter. Borders add cost and add curb appeal – a decision that’s mostly about the look of the house, not the performance.
What Paver Driveways Cost in Sunnyvale, TX

Expect $7,000 – $18,000 for a full paver driveway installation in Sunnyvale, TX. A basic 2-car drive with concrete pavers lands toward the low end; a long, bordered drive on an acreage lot with drainage work pushes toward the high end. Here’s what moves the number:
- Square footage. A 2-car drive is roughly 400 – 600 square feet; a 3-car or an RV pad runs 900 – 1,200+. This is the biggest single variable.
- Base prep and soil. Expansive clay that needs over-excavation and re-compaction adds cost up front and prevents the failure that would cost far more to fix later.
- Demo and haul-off. Tearing out existing concrete or asphalt and disposing of it runs more than a fresh install over bare dirt.
- Paver type and thickness. Clay brick and 80mm pavers cost more in material than standard 60mm concrete pavers.
- Drainage and slope work. French drains, swales, or a permeable base on a lot that sheds toward the house or an outbuilding.
A written estimate from us lists each of these as a line item – base depth, paver type, edge restraint, sand, drainage. It’s priced up front with no change orders once the work starts, and it’s backed by our 730-Day Done Right Promise. What it doesn’t include unless we call it out: relocating sprinkler lines or moving buried utilities, which we flag before demo if we spot them.
See the difference
Before
After
Before
After
Before
AfterWhat Sunnyvale Homes Specifically Do to This Job
Sunnyvale is a small, affluent town in ZIP 75182 on the eastern edge of Dallas County, and the building stock is largely large-lot, custom and semi-custom homes plus acreage properties. That changes paver driveways here in specific ways. For one, the permitting and inspection rhythm runs through the town’s own municipal office rather than a big-city department, and a small jurisdiction means the process is relationship-driven – we plan for it and build that time into the schedule. For another, the long driveways and shop/barn-style outbuildings out on the rural edges need separate slab and drainage planning, and the expansive blackland clay under those pads is the failure point most homeowners discover only after the first big spring storm. Hail season and summer heat also matter: pavers take both well, but a properly compacted base and edge restraint are what keep the surface true through the freeze-thaw cycles that hit North Texas in winter. Homes along the larger acreage tracts often pair a new paver drive with outbuilding power and slab work, which we plan together rather than as separate jobs.
Serving Sunnyvale, TX – Our Local Coverage Area
We serve Sunnyvale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Sunnyvale

A typical paver driveway in Sunnyvale takes 4 to 7 working days from demo to final compaction, with larger or bordered droveways on acreage properties running longer. The base stage is where most of the time goes, and it’s the stage you don’t want rushed. Call (888) 426-8078 for a schedule estimate specific to your driveway.
Permit requirements for a paver driveway in Sunnyvale depend on the scope – a replacement in kind is treated differently from a new drive that changes runoff or connects to the street. We pull the permits that apply and pass the inspections, and we’ll tell you on the estimate exactly what your job needs. Call (888) 426-8078 for a free estimate and a straight answer on permits.
Yes, in many cases a paver driveway can go over an existing sound concrete slab if the surface is stable, properly prepped, and drainage allows. We check the slab condition and grade before recommending it, because a failing or heaved slab under pavers will telegraph through. Call (888) 426-8078 and we’ll tell you which approach fits your drive.
A paver driveway in Sunnyvale runs $7,000 – $18,000, compared with roughly $4,500 – $12,000 for concrete. Pavers cost more up front but a single damaged paver swaps out without breaking out the whole slab. Call (888) 426-8078 for a free line-item estimate in either material.
Every paver driveway we install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it’s in writing. Call (888) 426-8078 with any warranty question before you sign.
Get a Free Paver Driveway Estimate in Sunnyvale
A free on-site estimate is the fastest way to know what your paver driveway in Sunnyvale will cost. We walk the driveway, check the base and drainage, and hand you a written line-item quote with no surprise change orders – most estimates take about 30 to 45 minutes. Call (888) 426-8078 and a live person answers, day or night. We serve homeowners across Sunnyvale and the surrounding area; if your driveway is part of a wider project, our Driveway & Pavers in Sunnyvale page lays out the full scope, and if you’re building out an outbuilding or living space alongside it, homeowners often pair this with Garage Conversion ADU in Sunnyvale. Reach out and we’ll get you on the schedule.
Written by the team at Groundwork Construction Co.












