







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trying to time a kitchen project around the Blackland Prairie clay that runs under Sachse, TX? Small and partial kitchen remodels here typically run $14,000 – $45,000 and take two to five weeks of on-site work, and the size of that number hinges less on how fancy the finishes are than on what the slab and framing underneath are doing. Call (888) 426-8078 to schedule a free on-site estimate.
What Small & Partial Kitchen Remodels in Sachse Actually Involve
A partial kitchen remodel in Sachse covers the work that stays inside your existing footprint: replacing or refacing cabinets, swapping counters and backsplash, updating a run of appliances, adding a peninsula or island, or reworking lighting and outlets without tearing into walls. It is not a full gut, and it should not carry full-gut pricing. Most of our Sachse jobs land between $14,000 and $45,000, finish in two to five weeks of active construction, and leave you cooking in your own kitchen far sooner than a down-to-studs overhaul would.
How a Partial Kitchen Job Actually Runs, Stage by Stage

We sequence these jobs so the messy, slow parts are done before the visible work starts. Here is the real order, and where you’ll be asked to make decisions.
Stage 1: On-site measure and scope lock (week 0)
We walk the kitchen, take exact cabinet and counter dimensions, and check what’s behind the walls where we can: outlet locations, the age of the shutoffs under the sink, and whether the floor is level. This is where you decide the footprint. If you’re keeping the sink and range where they sit, the trades stay simple and the budget stays low. If you want to move the sink two feet for a better triangle, we flag that plumbing and drain relocation on the spot and price it before you commit. The visit wraps with a written line-item scope you can read and question.
Stage 2: Material selections and ordering (week 0 – 1)
You’ll pick cabinet style and box construction, counter material and edge profile, backsplash, hardware, sink, faucet and lighting. The single most common cause of a stalled kitchen is a countertop ordered late, so we lock the counter selection before demo begins. Quartz in a Silestone or Caesarstone line is the usual pick because it resists staining and doesn’t need sealing; natural stone is beautiful and needs periodic sealing. You’ll also decide here whether to keep your existing venting or upgrade the range hood, which affects cabinet layout above the cooktop.
Stage 3: Protection, demo and rough-in (days 1 – 3)
Day one is containment: plastic sheeting, floor protection, and shutting off water and power to the work zone. Demo of old counters, backsplash tile and cabinet faces happens on days one and two. If the scope includes new electrical for under-cabinet lighting or a dedicated appliance circuit, the licensed trades rough in on day two and three, and the inspection is scheduled if your scope requires a permit. You don’t need to be home for this phase, but you do need to clear the fridge contents and the counters beforehand.
Stage 4: Cabinet install, drywall patch, and counter template (days 3 – 10)
New cabinet boxes and doors go in, drywall and backsplash substrate gets patched and squared, and the countertop fabricator templates the actual units. Template day is the point of no return on the counter, so this is when any last-minute change to sink size has to be decided. Fabrication usually takes five to ten working days after template, which is the longest quiet stretch of the project. We use that window for backsplash prep, lighting install, and painting where the scope includes it.
Stage 5: Counter set, backsplash, trim-out and walkthrough (days 10 – 21)
Counters set, sinks and faucets connect, backsplash tile goes up and grouts, and hardware and lighting trim out. We test every outlet and light, confirm the dishwasher and disposal run clean, and do a final walkthrough with you. Most Sachse partials are done inside three weeks of active work. You’ll get a punch list, and anything on it gets fixed under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Change the Outcome
Most of the decision weight on a partial kitchen sits in five picks. Here’s the honest trade-off on each.
- Cabinet refacing vs. new boxes. Refacing keeps your existing boxes and replaces doors and drawer fronts, which saves real money and days of labor if the boxes are solid and square. New boxes are the better call when the existing layout wastes space or the boxes are sagging. Refacing is a poor fit if you’re also changing the footprint.
- Quartz vs. natural stone counters. Quartz (Silestone and Caesarstone are both reliable lines) resists stains, doesn’t need sealing, and comes in consistent slabs. Granite and marble look one-of-a-kind and cost more to maintain. For a busy Sachse family kitchen, quartz usually wins.
- Sink and faucet grade. A Kohler or Moen faucet in the mid-range holds up for years; the bargain-bin versions fail at the cartridge. This is one place where spending a little more up front pays off, because a leak under the sink is a cabinet-destroying event.
- Backsplash tile format. A simple subway or large-format tile installs faster and cleans easier than a mosaic with a lot of grout lines. Small-format tile looks great and costs more in labor, not materials.
- Lighting and outlets. Adding under-cabinet lighting and a couple of new circuits is a modest add that changes how the kitchen feels. It’s also the item most likely to require a permit, so decide it before stage 3, not after.
What Small & Partial Kitchen Remodels Cost in Sachse, TX

For Sachse, plan on $14,000 at the low end for a reface-plus-counter job and up to $45,000 for a partial that includes new boxes, an island, relocated electrical and premium counters. Here’s the line-item picture so you can see where the money goes.
| Line item | Typical range |
|---|---|
| Cabinet installation or refacing | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
Five variables push a Sachse job from the low end toward the high end:
- Footprint changes. Moving the sink, range or dishwasher means relocating plumbing and gas, which is the single biggest cost jump on a partial.
- Existing condition. Out-of-square walls, a floor that’s heaved from slab movement, or old galvanized supply lines all add prep work before a single cabinet hangs.
- Material grade. Refaced doors and laminate counters sit at the bottom; full-overlay custom boxes and premium quartz sit at the top.
- Electrical and lighting scope. New circuits, under-cabinet lighting and hood venting add cost and possibly a permit.
- Permit scope. Cosmetic swaps usually don’t require one; moving plumbing, gas or adding circuits usually does, and the inspection adds time and a fee.
A written estimate from us lists every line above with a fixed number, and the number you see is the number you pay. What’s included: labor, materials we supply, demo, haul-away and the final walkthrough. What’s typically not: appliances you buy yourself, structural changes discovered behind a wall, and any scope you add after demo. Those get priced in writing before we proceed, never as a surprise on the invoice.
See the difference
Before
After
Before
After
Before
AfterWhat Sachse Homes Specifically Do to This Job
Sachse sits on Blackland Prairie clay, and that clay is the reason a kitchen job here is never purely cosmetic. The soil holds moisture through the winter and cracks open in summer, so a slab that looks flat in March can show movement by August. When we set cabinets on a Sachse slab, we check for level first, because a floor that’s out by a quarter inch over ten feet will make every cabinet door and drawer front fight you for the life of the kitchen. If we find that, we shim and level the toe kick properly rather than forcing the boxes. It’s also why we don’t recommend heavy stone counters on an unlevel run without correcting the base.
Most of the homes we work in here were built from the 1980s through the 2000s, brick-veneer single-family on slabs, so the kitchens are typically original to that era: oak cabinets, laminate or tile counters, and a layout that walls off the cook from the family room. That era also means you’ll sometimes find aluminum branch wiring or a Federal Pacific-style panel concern, which we flag and route to a licensed electrician rather than work around. Permits for a partial in Sachse run through the city’s building department, and inspection timing matters if your scope touches plumbing or electrical. We pull the permits and schedule the inspections so you’re not chasing them. If you’re also planning to touch the room next door, our Small Bathroom Remodels in Sachse page covers that job, and storm-damaged exteriors often get handled alongside at the same time through Roof Repair in Sachse.
Serving Sachse, TX – Our Local Coverage Area
We serve Sachse and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Small & Partial Kitchen Remodels in Sachse

Most partial kitchen remodels here take two to five weeks of active construction, with countertop fabrication adding roughly five to ten working days of quiet time in the middle. Call (888) 426-8078 for a schedule built around your kitchen.
Cosmetic work like cabinets, counters, backsplash and paint usually does not require a permit, but moving plumbing, gas lines or adding electrical circuits typically does. We confirm the requirement for your specific scope and pull the permit when one is needed. Call (888) 426-8078 and we’ll tell you up front whether your job crosses that line.
Yes. Keeping the sink, range and dishwasher in place is exactly what keeps a partial remodel affordable and fast. The trade-off is that you’re working within the existing layout, so a better flow may not be possible without relocating a drain. Call (888) 426-8078 and we’ll walk the options during your free estimate.
A small kitchen remodel in Sachse typically runs $9,000 – $20,000, while a fuller partial with new cabinets and an island lands in the $14,000 – $45,000 range. The variables that move it are footprint changes, existing condition, material grade and electrical scope. Call (888) 426-8078 for an exact quote; estimates are free.
Every partial kitchen we complete is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. Finish and craftsmanship are backed in writing, and any punch-list item found at the walkthrough gets corrected. Call (888) 426-8078 with questions about coverage.
Get a Free Estimate for Small & Partial Kitchen Remodels in Sachse
If your kitchen needs a refresh and not a rebuild, the next step is a free on-site estimate. We’ll measure, check the slab and the shutoffs, and hand you a written line-item scope with a fixed price, the permits your job requires, and a realistic schedule. You’ll also hear about 0% financing for 18 months and $1,000 off projects over $10,000 if they apply. Call (888) 426-8078 to book it, or start with our Kitchen Remodeling in Sachse page if your scope is larger, our Kitchen Remodeling service overview for the full picture, or our Sachse service area page to see what else we cover.
Written by the team at Groundwork Construction Co.












