







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Sachse: What It Costs and How Long It Takes
Walk-In Showers & Shower Remodeling in Sachse typically runs $9,000 – $28,000 for a full master bath shower rebuild, and $4,500 – $12,000 for a standalone walk-in shower install. A straightforward shower replacement lands between $3,000 and $8,500. Most builds take 2 – 4 weeks from demo to final walkthrough, depending on how far plumbing and tile work reach. Call (888) 426-8078 for a free on-site estimate and a written line-item quote.
How the job actually runs, start to finish

Shower work moves fast once it starts. The slow part is decisions, and we front-load those so the schedule holds.
Stage 1: Walkthrough and measurement (day 0)
We measure the existing shower footprint, check the drain location, and confirm what’s behind the tile. In Sachse’s 1980s – 2000s housing stock, that’s usually a fiberglass pan over a mortar bed or a framed alcove. You decide right here whether we’re keeping the footprint or expanding into a closet or tub alcove. That single decision swings the price by thousands, so we settle it before a quote goes out.
Stage 2: Permitting and material selection (days 1 – 7)
We pull the plumbing and electrical permits the work requires and submit plans if the layout changes. Meanwhile you pick tile, pan type, glass, and fixtures from real samples, not a catalog. This is where most homeowners spend their time, and where a postponed decision costs a week. We lock the order so nothing stalls the crew.
Stage 3: Demo and rough-in (days 1 – 3 on site)
The crew tears out the old pan, tile, and backer, then inspects the framing and subfloor. If a drain or supply line needs moving, the plumber does it now, and the inspector signs off before anything closes up. We don’t skip that step. Wet-area work that hides behind tile has to be right the first time.
Stage 4: Waterproofing and tile (days 4 – 10)
We build the sloped pan, install a waterproof membrane, and flood-test it. Once it passes, tile goes up over cement backer board, with the niche and bench framed in. Grout and sealant follow. This is the longest single stage because curing time can’t be rushed.
Stage 5: Glass, fixtures, and final inspection (days 11 – 14)
Glass gets templated after tile, then installed with the door hardware, showerhead, valve trim, and any grab bars. The final plumbing and electrical inspections close out the permit. We walk the shower with you, run the water, and check drainage and caulk lines before we call it done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Every shower build comes down to five decisions. Here’s the honest trade-off on each.
- Pan and base: A preformed acrylic pan is the fastest, cheapest option and holds up well in daily use. A tiled mud-set pan costs more but lets the floor match the walls and lasts decades. The tiled pan wins on looks; the acrylic wins on budget and speed.
- Wall tile: Large-format porcelain (12×24 and up) means fewer grout lines and easier cleaning, which matters in North Texas humidity swings. Small mosaic and natural stone look richer but demand more sealing and upkeep. Porcelain is the practical pick for a Sachse shower.
- Waterproofing system: A bonded sheet membrane or a liquid-applied membrane both work. Sheet membranes go in faster and are harder to get wrong. We use them on most showers here.
- Glass: Frameless glass opens the space visually and costs more; a framed enclosure runs less and survives impact better. For a walk-in with no door, a fixed panel and a low curb keep water in without a swing.
- Fixtures: Kohler and similar mid-tier brands hold up and carry parts support. Builder-grade valves save money up front but fail sooner. We quote both so you see the difference in writing.
What Walk-In Showers & Shower Remodeling costs in Sachse, TX

Our Sachse jobs run $9,000 – $28,000 for a full shower remodel, $4,500 – $12,000 for a walk-in install, and $3,000 – $8,500 for a replacement. That spread is real, and it comes down to five things:
| Line item | Typical range |
|---|---|
| Walk-in shower installation | $4,500 – $12,000 |
| Shower replacement | $3,000 – $8,500 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Full shower remodel (master) | $9,000 – $28,000 |
Size and footprint. Expanding the shower into a tub alcove or closet adds framing, drywall, and finish work. A 36×60 alcove kept as-is sits at the low end.
Plumbing relocation. Moving the drain or supply lines means opening the slab and re-inspecting. That alone can add $1,500 – $4,000.
Material grade. Porcelain over acrylic, frameless over framed, a tiled bench over none: each upgrade is priced separately in the quote.
Existing condition. Rot, old copper, or a compromised subfloor surfaces at demo. We flag it, show you the photo, and price the fix before proceeding.
Permit scope. A straight replacement may not need a permit; a layout change with new plumbing does. We handle the pull either way.
Our written estimates include demo, disposal, waterproofing, tile, fixtures, glass, and inspection. Items like structural repairs and mold remediation are quoted separately, in writing, if we find them. No change orders without your sign-off.
See the difference
Before
After
Before
After
Before
AfterWhat Sachse homes specifically do to this job
Sachse sits on Blackland Prairie clay, and that changes shower work in ways it doesn’t in cities on sandier ground to the west. The clay holds moisture through winter and cracks open in summer, so foundation movement is a live concern on almost every slab-on-grade home here. That matters for a shower because a level drain and a true pan depend on the floor staying put. When we set a pan, we check for slope and deflection first. On homes near Sachse Road and along the older stretches off Miles Road, we’ve pulled fiberglass pans that cracked where the slab had shifted, and that’s a foundation conversation, not a tile one. Brick-veneer homes built through the 1980s and 2000s dominate the housing stock, which means the original showers are at the end of their service life. North Texas heat and spring storms also drive humidity inside bathrooms, so we spec ventilation and sealant grades that hold up to it. Permits and inspections run through the local code office, and we pull them for the work that requires them. If your shower leaks reach the roof deck, homeowners often pair this with Roof Replacement & Installation in Sachse, and where a wider scope is in play, this becomes part of a full Bathroom Remodeling in Sachse.
Serving Sachse, TX – Our Local Coverage Area
We serve Sachse and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Walk-In Showers & Shower Remodeling in Sachse

Most Sachse shower remodels take 2 – 4 weeks from demo to final inspection. A straight replacement can finish in about a week; a layout change with plumbing relocation stretches toward four. Call (888) 426-8078 for a schedule after we see the shower.
You need a permit when the work moves plumbing, electrical, or structure, and often when you change the shower layout. A simple tile-and-fixture replacement may not require one. We confirm the requirement with the local code office and pull the permit for you.
Yes, and that’s the most common job we run. Replacing tile, pan, glass, and fixtures within the existing footprint stays at the lower end, around $3,000 – $8,500, and avoids the slab work that relocation requires.
A full shower remodel runs $9,000 – $28,000, a walk-in install $4,500 – $12,000, and a replacement $3,000 – $8,500. Call (888) 426-8078 for an exact quote. Estimates are free and itemized.
Every shower we build is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right. You get that in writing, along with the manufacturer warranties on fixtures and glass.
Ready for a quote on your Sachse shower?
Walk-In Showers & Shower Remodeling in Sachse starts with a free on-site estimate. Call (888) 426-8078, and a live person answers day or night. We’ll measure the space, talk through the options, and hand you a written line-item quote with no surprise add-ons. Curious about the broader scope? See our Bathroom Remodeling service. We cover all of Sachse and nearby Rowlett, Garland, Wylie, and Lucas, and homeowners often pair this work with Metal Roofing in Sachse.
Written by the team at Groundwork Construction Co.












