







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Fate, TX: What It Costs and How Long It Takes
Replacing vanities, tile and fixtures in Fate typically runs $9,000 – $28,000 for a full bathroom’s worth of work, and most of these jobs finish in two to four weeks once materials are on site. The number is driven mostly by tile selection and whether plumbing or electrical has to move. Call (888) 426-8078 for a free on-site estimate, and we’ll put the line items in writing before anything is ordered.
How we run a vanities, tile and fixtures job

These projects have a rhythm. Skip a stage and you pay for it later in cracked tile or a vanity that sits crooked against a wall that was never true. Here’s how the work actually sequences when we do it.
Stage 1: Measure and tear-out (day 1)
We pull the old vanity, toilet and any failing tile, then check the subfloor and wall behind it. On Fate slab homes this is where we find out whether the floor is flat enough for large-format tile. You decide at this point whether the layout stays put or shifts.
Stage 2: Rough-in and prep (days 2 – 3)
If plumbing or electrical is moving, this is when it happens, and it’s the stage that most affects your budget. We set backer board, float the floor if it’s out of plane, and confirm valve heights for the new fixtures. You approve fixture placement before anything gets closed up.
Stage 3: Tile setting (days 4 – 6)
Floor tile goes down first, then wall tile and any shower surround. Mortar and grout need cure time, and we don’t rush it. This is where your tile choice, size and pattern get locked in for good.
Stage 4: Vanity and fixture install (days 7 – 8)
The vanity gets set and shimmed level, the top and sink go on, then the faucet, shower trim, lighting and mirror. You walk through and check door alignment and drawer operation before we finish.
Stage 5: Grout, caulk and final walkthrough (day 9)
We seal grout, caulk the wet joints, clean up and walk the room with you. Any punch items get handled before we call it done, and the whole job sits under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll actually be making
- Vanity type: A freestanding stock vanity is the fastest and cheapest path; a semi-custom built-in fits odd wall lengths and gives you more storage. Custom cabinetry costs more and adds lead time, but it’s the only way to use a wall that isn’t square.
- Countertop: Quartz holds up best against water and staining and needs no sealing. Granite is durable but needs periodic sealing. Laminate is the budget pick and honest about its lifespan.
- Floor tile: Porcelain is dense, water-resistant and the default for a reason. Natural stone looks richer but costs more and needs sealing. Large-format tiles mean fewer grout lines but demand a flatter floor.
- Wall tile: A full-height surround protects the wall behind the vanity from splash and steam. A short backsplash saves money and looks clean in a smaller room.
- Fixtures: Kohler and similar brands give you real parts availability down the road. Cheap builder-grade faucets fail at the cartridge first, usually within a few years.
What vanities, tile and fixtures cost in Fate, TX

Expect $9,000 – $28,000 for a full bathroom’s worth of vanity, tile and fixture work in Fate. A straightforward refresh with a stock vanity, porcelain floor and a short backsplash lands near the bottom. A larger room with custom cabinetry, quartz, full-height tile and relocated plumbing pushes toward the top.
The variables that move the number:
- Room size and tile square footage: more area means more material and more labor hours.
- Existing condition: a floor out of plane or water-damaged subfloor adds prep before tile goes down.
- Relocating plumbing or electrical: moving a drain or adding a circuit is the single biggest line-item jump.
- Material grade: natural stone and custom cabinetry cost meaningfully more than porcelain and stock vanities.
- Permit scope: work that touches plumbing or electrical generally pulls a permit; cosmetic tile replacement usually doesn’t.
Your written estimate lists what’s included, line by line, with no change orders for surprises we should have caught. It’s part of our bathroom remodeling service, and we walk you through what’s not covered too, like structural repair if we open a wall and find rot.
See the difference
Before
After
Before
After
Before
AfterWhat Fate homes specifically do to this job
Fate is growing fast, and a lot of the housing here is newer 2000s-to-2020s brick-and-stone tract homes sitting on former pasture. That changes this job in a specific way. North Texas black clay swells and shrinks with wet-dry cycles, and on newly built lots the slab hasn’t finished settling. We regularly find floors out of plane in these homes, which means tile prep, not tile, becomes the real work. In the older scattered rural homes around Fate, we see the opposite: fixtures at the end of their life and tile adhesive that’s given up. Either way, the room usually needs more prep than the homeowner expected. HOA rules in the newer subdivisions can also dictate exterior vent and window specs, so if your project runs into that, it’s worth pairing with Bathroom Remodeling in Fate to handle the wider scope in one plan. We cover all of Fate, ZIP 75132 included, along with Royse City, Rockwall, Heath and Wylie.
Serving Fate, TX – Our Local Coverage Area
We serve Fate and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: vanities, tile and fixtures in Fate

Most jobs run two to four weeks from demo to final walkthrough, with about nine working days on site and the rest waiting on material lead times. Custom cabinetry is usually the longest wait. Call (888) 426-8078 and we’ll give you a realistic schedule for your room.
Cosmetic tile and fixture replacement generally doesn’t require a permit; moving plumbing, electrical or walls usually does. We tell you upfront which side your project falls on and handle the paperwork when a permit is needed. Call (888) 426-8078 to talk through your scope.
Yes, in most cases. Keeping the drain and supply lines where they are is the simplest, least expensive path and works fine when the new vanity is the same width or wider. Moving a drain adds cost and time. Call (888) 426-8078 for an exact quote, and estimates are free.
Vanity installation alone typically runs $800 – $3,000, depending on size, countertop and whether the plumbing stays put. That’s the narrow job; a full vanity, tile and fixture project lands in the $9,000 – $28,000 range. Call (888) 426-8078 for a line-item estimate.
Every job is backed by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That covers workmanship, and manufacturer warranties cover the fixtures and materials themselves. Call (888) 426-8078 with any warranty question before you book.
Get a free estimate for vanities, tile and fixtures in Fate
Call (888) 426-8078 to schedule a free on-site estimate for vanities, tile and fixtures in Fate. We’ll measure the room, talk through your tile and vanity options, and leave you with a written line-item quote and a realistic schedule. A live person answers around the clock, and we’ll tell you straight what the job needs and what it doesn’t. If you’re also looking at exterior work, homeowners often pair this with Tile Roofing in Fate or Specialty Roofing in Fate to handle both in one plan. Windows and doors, like Therma-Tru entry systems or ES Windows, are another common add-on through our Bathroom Remodeling service.
Written by the team at Groundwork Construction Co.












