







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Royse City, TX: What You’re Actually Choosing
Vanities, tile and fixtures in Royse City typically run $9,000 – $28,000, and most of that number comes down to what you pick, not how fast we work. A straightforward vanity swap with porcelain floor and wall tile lands near the bottom; a reworked layout with a custom vanity, natural stone tile, and relocated plumbing and electrical climbs toward the top. Most jobs run two to three weeks from demo to final walkthrough. Call (888) 426-8078 and we’ll scope your bathroom against real numbers, not a ballpark guess.
How We Sequence a Vanity, Tile & Fixture Job

This trade isn’t one project, it’s three that have to interlock in the right order. Show up early with the vanity and the tile order in hand and the whole job moves clean. Show up with a rough idea and the schedule runs long. Here’s how the work actually unfolds.
Stage 1: Demo and substrate inspection (day 1 – 2)
We pull the old vanity, tear out tile, and expose the wall and floor. This is the honest moment. Subfloor rot, cracked backer board, and old plumbing that leaked for years all show up here. We photograph everything and walk you through what we found before a single tile gets set. Older Royse City ranch homes on the outskirts often need a floor repair at this stage; newer subdivisions usually don’t.
Stage 2: Rough-in and permit inspection (day 2 – 4)
If your vanity is moving or you’re adding a second sink, plumbing and electrical get roughed in now, not later. Any plumbing relocation means a rough-in inspection before tile or wallboard closes it up. This is where you lock the layout decisions: sink count, vanity depth, mirror and lighting placement. Change the layout after this stage and the price moves.
Stage 3: Tile setting and waterproofing (day 4 – 9)
Waterproofing membrane, then backer board, then tile. Floors and walls set on separate days so joints line up and cure times hold. Grout and sealant come last. You choose grout color and sheen before we mix; matching grout to a stone tile is a decision worth making with samples in hand, not from a photo on your phone.
Stage 4: Vanity and fixture install (day 9 – 12)
The vanity cabinet sets, then the countertop, then sinks, faucets, drains, and the mirror and lighting. Fixtures you’ve chosen get installed here. This is the stage that most often slips, because a fixture that arrives on time is a fixture that gets installed on time. Confirm delivery windows when you order.
Stage 5: Final walkthrough and punch list (day 12 – 14)
We test every fixture, check every grout line, and hand you a written punch list of anything that needs a return visit. Nothing closes out until you sign off. That’s the last stage of a job backed by the 730-Day Done Right Promise, so the walkthrough matters as much to us as it does to you.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Your budget lands in the material choices as much as the labor. Here’s what Royse City homeowners actually weigh, and the honest trade-off on each.
- Vanity cabinet: stock vs. custom. A stock cabinet in a standard size saves several thousand dollars and installs in a day. A custom build fits an awkward corner or a sloped ceiling and lets you control drawer depth and door style. If the room is standard, stock is the right answer. If it isn’t, custom earns its premium.
- Vanity top: quartz vs. natural stone vs. solid surface. Quartz holds up to water and requires no sealing; it’s the low-maintenance pick. Marble looks better and stains faster. Solid surface is the budget option and can be repaired if it chips.
- Floor tile: porcelain vs. ceramic vs. natural stone. Porcelain is dense, resists water, and handles daily traffic. Ceramic is cheaper and softer. Stone is beautiful and needs sealing twice a year. In blackland clay country, a well-prepared subfloor matters more than the tile you pick.
- Wall tile: full-height vs. wainscot. Full-height tile protects the wall from splashes and looks sharp. A wainscot tile to 48 inches costs less on material and labor and still protects the wet zone.
- Fixtures: brushed nickel vs. chrome vs. matte black. Finish is the choice that ages fastest. Chrome resists spotting and lasts decades. Brushed nickel hides water spots. Matte black shows every fingerprint in a busy household.
- Faucet: single-hole vs. widespread. Single-hole is simple and easier to clean. Widespread gives more deck space and looks proportional on a wide vanity.
What Vanities, Tile & Fixtures Costs in Royse City, TX

Our range here is $9,000 – $28,000, and the number is set almost entirely by these five variables:
- Size and layout: A small secondary bath runs near the bottom; a primary bath with a double vanity, full-height tile, and a soaking tub surround runs near the top.
- Existing condition: Subfloor damage and old plumbing push the number up. Clean substrate keeps it down.
- Moving plumbing, electrical, or structure: A vanity relocation or a second sink means rough-in work and a permit. A same-spot swap doesn’t.
- Material grade: Porcelain and stock cabinets vs. natural stone and custom cabinetry can swing a job by $6,000 – $10,000 on its own.
- Permit scope: Plumbing relocation and electrical changes require permits and county inspections. Cosmetic tile and vanity swaps typically don’t.
Your written estimate lists each line: demo, substrate repair, rough-in, tile, vanity, fixtures, and disposal. It also lists what’s not included, such as fixture delivery delays, hidden subfloor rot, and any layout change after rough-in. We don’t do change orders buried in fine print. The number you see is the number you pay. Financing at 0% for 18 months is available, and projects over $10,000 take $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat Royse City Homes Specifically Do to This Job
Royse City sits on the eastern edge of the DFW growth corridor along I-30, and that shapes this work more than any other factor. Most of the housing stock in 75189 is new-construction subdivision homes from the last 15 to 20 years, which means the vanities and tile we replace are usually builder-grade. Builder cabinets are particleboard boxes with a veneer finish that swells at the seams within a decade. Builder tile is a thin ceramic set over minimal prep, and it cracks where the subfloor flexes.
The Blackland Prairie clay under those subdivisions swells and shrinks with every wet-dry cycle, and crews building in the newer sections off FM 548 fight that same movement. It shows up in bathroom floors as grout cracks and tile lifting at the perimeter, especially near doorways and tub edges. When we tear out tile in these homes, we find the subfloor was never isolated from that movement. We fix that with a proper decoupling membrane before new tile goes down, and it’s why we spend more on prep than some crews spend on the entire tile set. If you’re pairing bathroom work with roof repairs or an exterior upgrade, homeowners often pair this with Specialty Roofing in Royse City to get the whole exterior sorted in one season, or Tile Roofing in Royse City when clay movement has already done a number on the roof edge. We cover Royse City and the surrounding corridor including Fate, Rockwall, Heath, and Wylie.
Serving Royse City, TX – Our Local Coverage Area
We serve Royse City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Royse City

Most jobs run two to three weeks from demo to final walkthrough. A small secondary bath with a stock vanity and porcelain tile can finish in about ten days. A primary bath with a custom vanity, natural stone, and relocated plumbing takes closer to three weeks. Call (888) 426-8078 for a schedule based on your actual scope.
A cosmetic swap of a vanity and tile in the same location typically doesn’t require a permit. Moving plumbing, adding a sink, or changing electrical does. We pull the permits and schedule the inspections when the scope requires them, and we tell you upfront whether yours does. Call (888) 426-8078 to confirm your scope.
Yes, and it’s the most common job we do. A same-spot vanity swap with new tile, fresh fixtures, and a new mirror keeps the plumbing and electrical where they are and keeps the budget near the low end of the range. The layout stays, the finish changes. Call (888) 426-8078 for a written estimate.
Vanities, tile, and fixtures in Royse City run $9,000 – $28,000 depending on size, condition, material grade, and whether plumbing moves. A single vanity with porcelain tile is the low end. A full primary bath with custom cabinetry and natural stone is the high end. Call (888) 426-8078 for an exact quote. Estimates are free.
Every vanity, tile, and fixture job we complete is covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If a tile pops, a cabinet door fails, or a fixture install doesn’t hold, we make it right. Calls are answered by a live person, 24/7, so you’re not leaving a message in a black hole.
Get a Free Estimate on Vanities, Tile & Fixtures in Royse City
Call (888) 426-8078 to schedule a free on-site estimate for vanities, tile, and fixtures in Royse City. On the call, we ask a few questions about the bathroom, the layout, and what you’re hoping to change, then set a time to measure and walk the space. You’ll get a written line-item estimate with the numbers in front of you. If the job grows into a full room rebuild, that’s covered under Bathroom Remodeling in Royse City, and you can see the wider scope on our Bathroom Remodeling service page.
Written by the team at Groundwork Construction Co.












