







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Heath, TX: Scope, Timeline and Cost
Vanities, tile & fixtures work in Heath runs $9,000 – $28,000 for a full bath, and $800 – $3,000 of that is typically the vanity alone. A typical project takes 2 – 4 weeks from demo to final caulk, with the tile-and-fixture install itself landing in the last 5 – 8 working days. For a firm number on your Heath bathroom, call (888) 426-8078 and we’ll walk the room with you.
Key takeaways
- Vanity install: $800 – $3,000. Walk-in shower tile work: $4,500 – $12,000. Full bath refresh: $9,000 – $28,000.
- Most Heath jobs finish inside 3 weeks if the plumbing stays put.
- Tile selection, substrate condition, and whether you relocate the vanity drain drive the price more than anything else.
- Every project is backed by our 730-Day Done Right Promise – if it isn’t right, we make it right.
How we run a vanity, tile and fixture job in a Heath home

Most contractors treat this phase like finish work that happens last and fast. We sequence it deliberately, because tile and fixture mistakes are the ones you live with for twenty years. Here’s the actual order of operations.
Stage 1: Walkthrough and spec lock (day 1, about 90 minutes). We measure the room, check for soft subfloor, and photograph the existing plumbing rough-in. You decide on tile (format, grout color, layout), vanity size and door style, and fixture finishes at this meeting. Those three choices get locked in writing before anything is ordered, because tile lead times in this market run 7 – 14 days on special orders and a mid-project change adds a week.
Stage 2: Demo and substrate prep (days 2 – 3). We pull the old vanity, toilet, and floor tile, then set the backer board and waterproofing membrane. On Heath homes with slab foundations, we check for hairline cracks and grind or patch before the thinset goes down. This is also when we cut the new shower niche and valve rough-in if you’re changing trim – the plumbing has to be right now, because it’s buried after this.
Stage 3: Tile set (days 4 – 6). Floor and wall tile go down, then cure for 24 hours before grouting. Grout gets sealed the following morning. Larger-format tile (24″ x 48″ porcelains are common now) actually reduces grout lines but requires a flatter substrate, so any floor leveling happens in Stage 2, not here.
Stage 4: Vanity, fixtures, and trim (days 7 – 9). We set the vanity, drop in the sink and faucet, install the toilet, shower trim, and any glass. The vanity top goes on last so it doesn’t get chipped during tile work. You or your plumber finalizes the supply connections and drain.
Stage 5: Punch and walkthrough (day 10 – 14, depending on glass cure time). We test every fixture, check caulking lines, and walk the room with you. Any touch-ups get done before the job closes.
If this is part of a Bathroom Remodeling in Heath project that also touches cabinets, plumbing relocation, or layout changes, the tile phase gets slotted in after rough-in and before paint. Same crew, same schedule, one contract.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
You’ll make three real decisions on this job: vanity, tile, and fixture finish. Each has a trade-off worth knowing before you commit.
- Stock vanity vs. semi-custom. A 60″ stock vanity runs $800 – $1,500 and ships in 3 – 5 days. Semi-custom (Kohler and similar lines) runs $1,800 – $3,000 but gets you a specific width, drawer layout, and finish you can’t buy off the shelf. In a Heath master bath with an odd wall, semi-custom usually wins.
- Porcelain vs. ceramic vs. natural stone floor tile. Porcelain is the workhorse: dense, water-resistant, and holds up to North Texas humidity. Natural stone (travertine, marble) looks richer but needs sealing every 1 – 2 years, and it’s softer underfoot on a slab. Coastal or lake-view homes lean stone; everyday baths lean porcelain.
- Framed vs. frameless shower glass. Framed costs less and hides door alignment better over years. Frameless looks clean but requires a perfectly plumb wall – worth doing if the shower is the visual center of the room. Most Heath custom and semi-custom builds are going frameless.
- Chrome vs. brushed nickel vs. matte black fixtures. Chrome is the cheapest and the most timeless. Brushed nickel is the safest resale choice. Matte black and bronze show water spots the fastest and cost more for finishes that wear.
- Tile layout: running bond vs. offset vs. herringbone. Running bond uses the least tile and least labor. Herringbone and large-format diagonals add 15 – 25% to tile-set labor and waste, but you get a look you don’t see in every spec home on the block.
What Vanities, Tile & Fixtures costs in Heath, TX

The realistic range in Heath is $9,000 – $28,000 for a full bathroom’s worth of vanity, tile, and fixtures. Smaller jobs, a vanity-only swap with minor tile work, land closer to $1,500 – $5,000.
- Bathroom Vanity Installation: $800 – $3,000 – driven by vanity size (single vs. double), stock vs. semi-custom, and countertop material.
- Walk-In Shower Installation: $4,500 – $12,000 – tile format, niche work, glass, and waterproofing detail.
- Tub-to-Shower Conversion: $3,500 – $10,000 – plumbing moves and drain relocation push this to the top end.
- Shower Replacement: $3,000 – $8,500 – direct swap, no plumbing change.
- Full bathroom tile, vanity and fixture refresh: $9,000 – $28,000.
Four variables move the number:
- Tile format and layout. Large-format tile saves grout but adds substrate work. Herringbone and mosaic add 15 – 25% labor.
- Plumbing location. Same-spot replacement keeps cost low. Moving the drain or supply lines adds $400 – $1,200 and typically a permit.
- Vanity grade. Stock vs. custom really is a $1,000 – $2,000 swing.
- Existing condition. Soft subfloor, cracked slab, or moisture damage under the old tile all add prep work.
- Permit scope. Cosmetic swaps don’t trigger permits; plumbing relocation and electrical changes do.
Every written estimate from us spells out line by line what’s included – tile, setting materials, glass, and labor – and what’s not (fixture cost if you’re sourcing your own, drywall repair past the tile line). The number you see is the number you pay. No change orders unless you ask for a change.
See the difference
Before
After
Before
After
Before
AfterWhat Heath homes specifically do to this job
Heath’s newer homes on acre-plus lots and its 1970s – 90s lakefront ranches are two very different jobs, and the tile and vanity work reflects it. In the newer builds, we’re often re-doing builder-grade tile that’s flat-out worn out within 8 – 10 years – flimsy substrates and stock-grade porcelains that pop loose on the clay soil underneath. Those jobs are straightforward swaps on sound slabs. On the older lake-side properties, moisture is the bigger story: subfloor rot, backer board that’s failed, and vanities soft at the toe kick. We open those up and rebuild the substrate before anything else.
Two Heath-specific realities matter to your schedule. First, slab movement. Expansive clay under most of Heath swells and shrinks with our wet-dry cycles, and a slab that’s shifted 3/8″ between seasons will telegraph through thin-set tile if the substrate isn’t prepped to spec. Second, on the Lake Ray Hubbard side of Heath, tight setbacks and floodplain restrictions mean we plan material staging and tile deliveries with the driveway layout in mind – not every lot here gives you room to park a tile pallet. If your home sits on one of those parcels, we factor that into the schedule on day one. Homeowners often pair this with Tile Roofing in Heath when storm season has taken a toll on the exterior at the same time.
For the wider project scope, our Bathroom Remodeling service covers everything from layout to finish, and we cover all of Heath including the lakefront and newer-build neighborhoods.
Serving Heath, TX – Our Local Coverage Area
We serve Heath and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Vanities, Tile & Fixtures in Heath

Expect 2 – 4 weeks for a full bathroom’s worth of work, with the bulk of that being tile cure time and material lead times. Stock vanities and in-stock tile can cut a week off the front. Special-order tile adds 7 – 14 days. Call (888) 426-8078 for a scheduling estimate on your specific room.
Cosmetic work – swapping a vanity in the same spot, re-tiling existing surfaces, replacing fixtures – usually doesn’t require a permit. Moving plumbing supply or drain lines, adding electrical, or changing the room’s footprint typically does, and inspections are coordinated with the local authority having jurisdiction. We pull the permit and pass the inspection when one is needed; estimates are free, so call (888) 426-8078 to confirm your scope.
Yes, and it’s the most common version of this job. A same-spot vanity swap with full tile floor and shower walls is a straightforward project that stays in the $9,000 – $16,000 range for most Heath bathrooms. If you’re not relocating drains or supply, we can usually schedule start within 2 – 3 weeks. Call (888) 426-8078 for an exact quote.
Full bath: $9,000 – $28,000. Vanity only: $800 – $3,000. Walk-in shower tile work: $4,500 – $12,000. The high end usually means large-format or natural stone, plumbing relocation, and a semi-custom vanity. The low end is a stock vanity, standard porcelain, and no plumbing moves.
Every vanity, tile and fixture project we complete is backed by our 730-Day Done Right Promise – if it isn’t right, we make it right, for two years after completion. Workmanship issues with tile, caulk lines, and fixture installation are covered; wear and damage from use aren’t. Our technicians have up to 12 years of experience on this exact work.
Ready to price your Heath bathroom?
Call (888) 426-8078 for a free on-site estimate. We walk the room, measure what matters, and leave you with a written line-item quote – tile, vanity, fixtures and labor, all itemized. Live person answers, 24/7. Estimates are free, and if you’re ready to schedule, we’ll book a start date before we leave the driveway. Vanities, tile & fixtures done right the first time, backed in writing.
Written by the team at Groundwork Construction Co.












