







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vinyl Fence in Garland, TX: What It Costs and How Long It Takes
Vinyl fence installation in Garland runs $3,500 – $9,000 for most residential yards, and a typical job is finished in two to four days once the layout and permits are settled. That figure covers panels, posts, rails, caps, and concrete footings on a normal lot. The number that matters is the one in your written quote, and you’ll have it before anyone digs. Call (888) 426-8078 and we’ll walk the property with you.
How We Build a Vinyl Fence in Garland, Start to Finish

Every vinyl fence in Garland moves through the same five stages. What changes is how much of the yard is already graded, where the utility lines sit, and how tight the side yards are.
- Stage 1: Site visit and measurements (45 – 90 minutes). We walk the fence line, measure the total run, check slope and drainage, and look for irrigation, gas, and electrical runs before anything gets marked. You decide the fence style and the run path here.
- Stage 2: Utility locates and HOA review (1 – 10 days, mostly waiting). Texas law requires locates before digging. If you’re in a subdivision with deed restrictions, you’ll want your HOA’s approval in hand now, on paper, before we order material. On the older ranch lots near the downtown core, locates take a day or two; in the newer northern additions it’s usually faster.
- Stage 3: Material order and delivery (3 – 7 days). Vinyl panels arrive as a kit: posts, rails, pickets, caps, and hardware. You’ll lock in color, height, and top style at this point. Weather can push delivery a day or two, and we tell you the moment it does.
- Stage 4: Demolition, prep, and install (1 – 3 days). If an old fence comes down, we pull it and clear the line first. Posts set in concrete and cure overnight. Panels and rails go on the following day. Pickets and caps close the job out.
- Stage 5: Walkthrough and cleanup (1 – 2 hours). We walk the line with you, check post plumb and panel alignment, haul off debris, and hand over the paperwork. You sign off once you’re satisfied, and the work is covered by our 730-Day Done Right Promise if anything isn’t.
So a simple install in a well-graded backyard usually closes in two to three working days. A tear-out plus install along a sloped lot runs longer. If your property needs a full-scale layout with concrete, pavers, or a replaced hardscape, that’s part of a full Fence Installation in Garland scope and we’ll quote it together.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Vinyl Fence Options You’ll Choose Between
Vinyl fencing isn’t one product. The choices below are where most of the real decisions get made, and they move both price and lifespan.
- Privacy panel vs. picket or semi-private. Full privacy runs full height with continuous pickets. Picket and semi-private styles show more, cost less, and suit front yards where sightline matters.
- Height: 4, 5, or 6 feet. Six feet is the standard privacy height. Some HOAs restrict front yards to four feet. Confirm the rule before you commit.
- Color and finish. White is classic and stays clean. Tan, gray, and woodgrain finishes are popular in Garland’s newer additions and hide the dust from our clay soils better than white.
- Post reinforcement. Standard vinyl posts hold up fine in most yards. Where a panel spans a long run or the wind exposure is high, steel-reinforced posts cost more and move far less.
- Top style. Flat caps, gothic pickets, and rail-top styles each change the look and the per-foot price.
- Gate hardware. Standard hinges and a latch are included. Self-closing or self-latching gates cost extra but matter if there’s a pool or children on the property.
Vinyl itself is a vinyl chloride polymer, which is why it holds color and doesn’t rot, warp, or need painting. It does go slightly more brittle in extreme heat over time, and a falling limb or a bad wind event can crack a panel. Individual panels are replaceable without tearing out the whole run, which is part of why homeowners here choose it.
What Vinyl Fence Costs in Garland, TX

Vinyl fence installation in Garland runs $3,500 – $9,000. Most residential backyards land in the $4,200 – $6,800 range. The high end sits where the job involves a tear-out, a long run, custom style, or a sloped or utility-cluttered lot. Call (888) 426-8078 for a firm on-site quote before you commit.
| Line Item | Typical Range |
|---|---|
| Standard privacy vinyl fence (per linear foot) | $28 – $48 |
| Post installation with concrete footings | $65 – $120 per post |
| Old fence removal and haul-off | $250 – $800 |
| Steel-reinforced posts or wind-rated panels | $600 – $1,400 added |
| Gate with hardware | $300 – $900 each |
| Permit filing and inspection coordination | $150 – $450 |
What moves the price:
- Total linear feet. The single biggest driver. A 100-foot run and a 300-foot run are different jobs.
- Existing fence and debris. Tear-out, hauling, and disposal add cost and time.
- Lot condition. Clay soils, slope, mature trees, and irrigation lines running right where the posts go all add labor.
- Style and height. Six-foot privacy in a woodgrain finish costs more than four-foot picket in white.
- Permit and inspection scope. City of Garland runs its own permitting, and a fence over certain heights or near a pool triggers inspection.
A written estimate from us covers material, labor, footings, gate hardware, and permit filing. It does not cover repair of irrigation lines we couldn’t see during the walk, replacing sod damaged by excavation, or bringing an existing gate up to storm or pool-code standard if the scope grows. Those are called out and added before work resumes, never discovered on your final invoice.
See the difference
Before
After
Before
After
Before
AfterWhat Garland Homes Specifically Do to This Vinyl Fence Job
Garland is a post-war streetcar suburb that grew into a full city, and its building stock splits sharply along a construction-era line. The older core – ZIPs 75040, 75041, and 75042 around the original downtown subdivisions – is full of 1950s and 1960s single-story brick ranches and post-war tract homes. Heading out toward 75043 and 75044 you’re in 1970s through 1990s subdivisions and newer master-planned additions. A vinyl fence bid in Garland depends on which decade you’re standing in, because that decides the lot size, the fence height your neighbors have set, and whether irrigation, gas, or old utility stubs are sitting where we want to set a post.
The ground matters as much as the housing. North Texas Blackland Prairie clay expands and contracts dramatically between wet springs and hot dry summers. On the older ranch lots that means footing depth, drainage on the fence line, and posts that stay plumb across years of swell and shrink. Vinyl doesn’t rot like wood, but a post not set deep enough in this clay will heave and lean. We set footings to spec for Garland’s soil, not for a generic national job. We’d rather spend an extra half-day setting it right than a warranty visit six months out.
Permits run locally too. Garland handles its own permitting and inspections rather than deferring to Dallas County. For a residential privacy fence that usually means a simple review, but a fence near a pool, a front-yard fence, or anything over the local height threshold gets inspected. We file and coordinate that for you. In the neighborhoods where homeowners often pair the fence work with a new hardscape, we quote it alongside Asphalt Driveways & Resurfacing in Garland so the whole exterior gets handled in one visit.
You’ll find us across Garland – from the older streets off the downtown core out to the northern additions. We know the city’s fence lines well enough to check the situation before we bid. If you’re in a nearby town like Sachse, Rowlett, Wylie, or Sunnyvale, our Fence Installation service covers there too, and you can see the wider Garland coverage page for the full picture.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vinyl Fence in Garland

Two to four working days once permits and material are in hand, with tear-out and curing extending it to a week on busy lots. On the day we quote, we lay out the timeline in writing so you can plan around it. Call (888) 426-8078 to schedule your free estimate and get the exact schedule.
Usually a simple residential privacy fence permit covers it, and Garland runs its own permitting rather than deferring to the county. Front-yard fences, pool enclosures, and anything over the local height threshold get a formal inspection. We file the paperwork and coordinate the inspection for you. That permit filing shows up as a line item on your quote, not as a surprise later.
Yes, with locates run first. Texas law requires utility locates before any digging, and we schedule those at the start. On Garland’s older ranch lots, it’s common to find irrigation lines, old gas stubs, or stray concrete from a previous fence sitting right on the proposed line. If we hit something, we stop, get your call, and adjust the run before touching a post. Call (888) 426-8078 to talk through your yard.
Most residential vinyl fence jobs in Garland land between $3,500 and $9,000, with the typical backyard quote in the $4,200 – $6,800 range. Line feet, style, height, tear-out, and land condition are the four variables that push a job to the low or high end. Call (888) 426-8078 for an exact quote – estimates are free.
The work is backed by our 730-Day Done Right Promise – if it isn’t done right, we make it right. That covers workmanship on post setting, footer, and panel installation for two years. The vinyl material itself carries the manufacturer’s warranty. We hand you both in writing at the walkthrough.
Get Your Free Vinyl Fence Estimate in Garland
Tell us the yard, we’ll come measure. Free on-site estimate for a vinyl fence in Garland, with a written line-item quote before anyone digs. Call (888) 426-8078 – a live person answers 24/7, so no voicemail. You’ll know the number you see is the number you pay. And if you’re adding a new driveway at the same time, ask about Driveway Repair & Replacement in Garland while we’re on site so you get one coordinated plan instead of two separate visits.
Written by the team at Groundwork Construction Co. of Mesquite.












