







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Garland: What It Runs and How Long It Takes
Backsplash, Tile & Flooring in Garland typically lands between $14,000 and $45,000 when you’re tiling a kitchen backsplash, laying new floor tile through the kitchen and adjoining rooms, and resetting the fixtures and trim around it all. A backsplash-only job runs $800 – $2,500; a full kitchen-and-floor package with porcelain or natural stone sits in the middle of that range, and jobs with subfloor repair or layout changes push toward the top. Most Garland tile projects take 1 to 3 weeks from demo to final grout. Call (888) 426-8078 to schedule your free estimate.
How a Real Tile Job Runs, Start to Finish

Tile work has a sequence, and skipping a step shows up six months later as a cracked tile or a hollow-sounding floor. Here’s how we run it on a Garland job.
Stage 1: Walkthrough and scope (day 1, about 60 – 90 minutes)
We measure the backsplash runs and floor footprint, check whether the existing tile sits on a sound substrate, and look at what’s under it. On older Garland homes that often means pulling a vent or an outlet cover to see whether there’s cement board or tile straight over drywall. You decide the tile, the pattern, and the grout color at this point, not later.
Stage 2: Demo and substrate prep (1 – 2 days)
Out comes the old material. Then we flatten the floor and replace any soft or rotted subfloor. In a ranch home with a slab on clay soil, we check for cracks and high spots before a single tile goes down. Flat substrate is the whole game; a floor that’s off by a quarter inch telegraphs through large-format tile.
Stage 3: Layout and setting (2 – 4 days)
We dry-lay the pattern so cuts land in the right places and grout lines run true to the walls. Then thin-set, tile, and leveling clips. Backsplash and floor are usually set on separate days so foot traffic stays off the floor. Natural stone sealer goes on after the stone cures.
Stage 4: Grout, caulk, and trim (1 day)
Grout, then flexible caulk at every change of plane and where tile meets counter or cabinet. That’s the joint that cracks if it’s grouted rigid. You pick the grout color; we handle the rest.
Stage 5: Reinstall and walkthrough (1 day)
Outlets, switch plates, toe kicks, and any baseboard go back on. We walk the job with you under daylight and under a raking light, because that’s where lippage and grout haze hide.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Tile and Material Choices You’ll Actually Weigh
The material decision drives both the look and the budget. Here’s the honest trade-off on each.
- Porcelain tile: The workhorse for floors and backsplashes. Dense, water-resistant, holds up to a busy Garland kitchen, and comes in large formats that read like stone. Priced in the middle of the pack.
- Ceramic: Softer and less expensive than porcelain, fine for a backsplash but not the best pick for a floor that takes daily traffic.
- Natural stone (travertine, marble, slate): The premium look. Each piece is unique, but stone costs more, needs sealing, and marble can etch from acidic spills. Best for a homeowner who wants a statement backsplash.
- Luxury vinyl plank over tile-look: The budget route for flooring when the slab is sound. Warmer underfoot and fast to install, but it’s not tile and won’t last like it.
- Large-format vs. subway vs. mosaic: Large format means fewer grout lines and a cleaner look but demands a flatter substrate. Subway tile is timeless, easy to replace, and forgiving. Mosaic is the choice for a shower floor or a decorative band.
What Backsplash, Tile & Flooring Costs in Garland, TX

Expect $14,000 – $45,000 for a full backsplash-plus-flooring package in Garland. Backsplash alone is $800 – $2,500. Five things push a job toward the top of that range:
- Square footage: A galley kitchen floor is a few hundred square feet; an open kitchen flowing into a dining room can double that.
- Existing condition: Cracked slab, soft subfloor, or tile glued over drywall all add prep time.
- Moving plumbing or electrical: Relocating an outlet behind a backsplash or a sink line over a new floor adds labor and a permit.
- Material grade: Porcelain sits mid-range; natural stone at the high end; vinyl at the low end.
- Layout complexity: A herringbone or diagonal pattern means more cuts and more waste than a straight lay.
A written estimate spells out square footage, tile allowance, substrate prep, and the grout and caulk line items. It won’t include hauling off a surprise layer of old tile unless we flag it during the walkthrough.
See the difference
Before
After
Before
After
Before
AfterWhat Garland Homes Specifically Do to This Job
Garland’s building stock splits along an era line, and that line runs straight through every tile job. The older core around downtown and the original 1950s-60s streetcar subdivisions in 75040, 75041, and 75042 is mostly single-story brick ranch where you’re walking into a slab poured on Blackland Prairie clay. That clay swells and shrinks between wet springs and dry summers, so before we set a single floor tile we check the slab for cracks and lippage, because pulling up old flooring to a cracked slab is a real cost on these ranches. Out toward the newer 1970s-90s and master-planned additions in 75043 and 75044, you’re often working over a pier-and-beam or two-story frame, and the floor flatness question changes. The mid-century ranch concentration also means undersized electrical service, sometimes a 100-amp fuse-era panel, which matters the moment a backsplash calls for more outlets. We pull the permits and pass inspections on every Garland job, coordinated with the city’s own permitting office. If the tile work is part of a full rebuild, see Kitchen Remodeling in Garland for the wider scope and how we sequence it.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Backsplash, Tile & Flooring in Garland

A backsplash-plus-flooring package takes 1 to 3 weeks from demo to final walkthrough in Garland, depending on square footage and substrate condition. Backsplash alone runs 1 to 3 days. We give you a stage-by-stage timeline in writing before we start.
Cosmetic tile replacement usually doesn’t require a permit, but relocating plumbing or electrical, or altering the structure, does, and Garland runs its own inspections rather than deferring to the county. We pull the permits and coordinate the inspections as part of the job.
Yes. In most Garland kitchens we tile right over the existing cabinet and counter layout without touching the sink or the supply lines. If you want the sink moved or more outlets added behind the backsplash, that’s a plumbing or electrical change and we factor the permit and labor into the estimate.
The full package runs $14,000 – $45,000; a backsplash alone is $800 – $2,500. The number moves with square footage, substrate condition, material grade, and layout complexity. Call (888) 426-8078 for an exact quote; estimates are free.
Every job is covered by our 730-Day Done Right Promise, so if the grout cracks or a tile lifts, we make it right. That’s backed in writing. Call (888) 426-8078 to schedule your free estimate.
Get a Free Backsplash, Tile & Flooring Estimate in Garland
Our team walks your kitchen in Garland, measures every run, and hands you a written line-item quote with tile allowances and substrate prep spelled out, so the number you see is the number you pay. Calls are answered by a live person 24/7. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off. Call (888) 426-8078 to book your free estimate.
Written by the team at Groundwork Construction Co. of Mesquite.












