







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vinyl Fence in Lucas, TX: What It Costs and How Long It Takes
Most vinyl fence jobs on a Lucas acreage property run $3,500 to $9,000 and take three to five working days from layout to final walkthrough. That range covers standard 4- to 6-foot privacy runs and reflects our market-calibrated Lucas pricing, not a national average. Properties with long runs along a county road, gates between house and shop, or tie-ins to existing field fencing sit at the top. Call (888) 426-8078 for a free on-site estimate, and a live person answers any hour of the day or night.
How a Vinyl Fence Project Goes, Start to Finish

Vinyl fence looks simple to lay out on paper. In Lucas, the ground decides how the week actually goes. Here’s the real sequence we follow.
Stage 1: Site walk and layout (day one, 2 to 4 hours)
We walk the property with you and mark the fence line with stakes and string. On multi-acre tracts we confirm corners against the survey and flag any easements or utility lines before a post goes in. This is when you decide the run height, gate widths, and where you want the gate between driveway and pasture. You’ll also decide right here whether the fence ties into any existing fencing or stands alone.
Stage 2: Post holes and footing prep (day one into day two, 4 to 8 hours)
Vinyl fence posts get set in concrete, not pushed into soil, and hole depth matters more on Blackland clay than almost anywhere. We dig each hole 24 to 30 inches deep into the clay and set the post so the footer sits below the active soil layer that shrinks and swells. This is where a crew that skips depth to save a day gives you posts that lean after two seasons. We also confirm that no hole lands on a septic line or well run before digging.
Stage 3: Gravel, concrete, and cure (day two, 2 to 4 hours)
We set gravel at the base of each hole, pour the concrete footing, and let it cure for 24 to 48 hours. No rails go up until the footing has set. That pause is not negotiable.
Stage 4: Rails, panels, and gates (day three into day four, 8 to 12 hours)
Posts, rails, and panels are assembled, and gates are hung and adjusted to clear the ground by an even gap. On a 200-foot run with two gates, this is most of a full day. You are on site to walk the line at the halfway point and sign off on gate alignment before final trim.
Stage 5: Trimming, cleanup, and walkthrough (day four or five, 2 to 4 hours)
We set any height changes at grade, trim cut edges, drive every stake, and pull all spoil. The final step is a walkthrough with you, rail by rail, which is when any adjustment gets made on the spot. Every project is covered by the 730-Day Done Right Promise, and if something isn’t right after we walk it, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Vinyl Fence Options You’ll Choose Between
- Standard privacy panel vs. picket-and-rail: Privacy panels keep the yard private and run $25 to $45 per linear foot installed. Picket vinyl (a true ranch look) is about $20 to $32 per linear foot and fits acreage where a full privacy wall looks out of place.
- Height (4, 5, or 6 feet): Six foot is the default for a backyard privacy run, 4 foot for a perimeter of pasture or garden. Six-foot adds 10 to 15 percent over five-foot because of panel rigidity and post set depth.
- Rib profile and color: A smooth flat panel is the cheapest, and a taller rib or “contoured” panel holds up better in northwest Collin County wind. Color runs from white and tan to a two-tone with a darker cap or rail, which costs a bit more and hides the dust that collects on the top rail.
- Post construction: Steel-reinforced posts add $8 to $15 per post and are worth it on long runs and gate posts. Gate posts on a vinyl fence take the heaviest load of any post in the job.
- Gate hardware: Hinges, latches, and a self-closing kit for a double-drive gate are a line item on their own. A gate that swings open into the wind will pull the post over time, so we size the footing to the gate width.
- Tying in to existing fence: On properties with a field fence or older wood rail already in place, we can set a transition post and write it into the quote, which costs less than tearing out and rebuilding the whole line.
Our technicians have up to 12 years of experience setting vinyl in North Texas clay, and they know where the loose spots are near the fence line.
What a Vinyl Fence Costs in Lucas, TX

Expect $3,500 to $9,000 for a vinyl fence in Lucas, TX. The low end is a short privacy run on a level lot; the high end is a long run with multiple gates on uneven ground.
- Linear footage: The single biggest lever. A 100-foot run and a 300-foot run are different jobs and different quotes.
- Terrain: Slope and grade changes on more than a small lot require stepping the fence or board-by-board leveling.
- Gates: Drive gates and corner gates add posts, hardware, and footing depth.
- Root and rock removal: Old stumps and buried rock are common on Lucas acreage and cost extra time to clear.
- Site conditions: Access for a truck to the back of a property, septic/well coordination, and existing fence removal all factor in.
A written estimate will itemize linear footage, post count, gate count, and site preparation. What typically isn’t included is old fence demolition (quoted separately if you want it hauled off) and any foundation or grading work. We give no-hassle upfront pricing, so the number you see is the number you pay. If the scope stays the same from the walkthrough, it doesn’t change at the end.
See the difference
Before
After
Before
After
Before
AfterWhat Lucas Properties Specifically Do to This Job
Lucas is acreage country, and that changes a vinyl fence job more than anything else. The heavy Blackland clay under most of the town shrinks and swells with the wet and dry cycles, so post footings need to sit deep enough to stay below the moving layer or the whole line leans within a season. A fence on a suburban lot in a newer subdivision to the south often gets away with shallower hole depth. Out on properties off the larger acreage tracts, it doesn’t. Long runs along county roads mean long driveways, potential well and septic lines under the ground, and outbuildings (shops, barns, detached garages) that a fence often needs to tie into or separate from. We check for septic and well before a hole is dug.
Lucas sits in ZIP 75002, a semi-rural town north of Wylie and Allen where a contractor has to handle both custom residential fences and agricultural-scale structures. That mix is why gate placement and panel height get decided carefully: a gate that separates a house yard from a pasture is a different spec than a decorative garden gate. Many properties sit on newer custom builds mixed with older rural homesteads, so the fence has to look right next to both. When you’re ready to see how this fits alongside a larger exterior project, look at Fence Installation in Lucas or our Fence Installation service, and for grounding check Lucas.
Homeowners often pair this with Asphalt Driveways & Resurfacing in Lucas when the gate and drive alignment changes, or with Driveway Repair & Replacement in Lucas when fence footings settle around a deteriorating slab. If you’re comparing window specs at the same time, Andersen and Marvin-style European tilt-turn units from ES Windows or Therma-Tru doors come up often on these same exterior plans.
Serving Lucas, TX – Our Local Coverage Area
We serve Lucas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vinyl Fence in Lucas

A typical vinyl fence in Lucas takes three to five working days. Layout and demo happen on day one, post footings cure for 24 to 48 hours, and panels and gates go up over the next day or two, with a weather buffer built in.
Permit requirements in Lucas depend on height, location relative to the property line, and whether the fence runs along a county road. We confirm the current requirements during the site walk and pull whatever the scope requires before work starts, and we don’t quote a job without that check. The on-site estimate covers it, so call (888) 426-8078 and we’ll sort it out with you.
Yes. On most Lucas properties the fence line can route around a septic field or well run by adjusting post placement, and we confirm utility locations during the layout stage. If the line has to cross a buried line, we set the footing to span it rather than dig through it.
Vinyl fence in Lucas runs $3,500 to $9,000 for most residential jobs. Linear footage, terrain, gate count, and site prep decide where you land in that range, and the written estimate itemizes each one. Call (888) 426-8078 for an exact quote, and estimates are free.
Workmanship on every vinyl fence we install is covered by the 730-Day Done Right Promise. If the fence isn’t right after the walkthrough, we make it right, and we stand behind it in writing.
Get a Free Vinyl Fence Estimate in Lucas
An on-site estimate for your vinyl fence in Lucas is free. We walk the property, mark the line, and hand you a written, itemized quote before you commit to anything. When you call (888) 426-8078, a live person answers any hour and gets a technician scheduled to your property. If the project grows into a bigger outdoor plan, the same call covers it, and our 730-Day Done Right Promise backs the work from day one. Call to book your estimate.
Written by the team at Groundwork Construction Co. of Mesquite.












