







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in Seagoville, TX: What It Costs and What You Get
A wood fence in Seagoville, TX typically runs $3,500 – $9,000 for a standard residential lot, with most properties landing between $5,000 and $7,500 once you factor in the acreage, gate count, and material grade that fit your property. The job itself takes 2 – 4 days for a typical half-acre lot: one day for layout and demo, two to three days for posts, rails, and pickets, half a day for gates and cleanup. We pull permits on both sides of the county line where they’re required, and we answer the phone at (888) 426-8078 when you call – live, any hour. If you’ve priced a wood fence before and got three bids that read like they were written by different people, you know why this call matters.
How We Build a Wood Fence in Seagoville, Start to Finish

Here’s what actually happens on your property, day by day, so you know what to expect before anyone shows up.
Day 1 morning: Layout and utility locate
We walk the property line with you and stake the run. If you’re near a shared fence line with a neighbor, that conversation happens now, not after posts are in the ground. We call 811 for utility locates and wait the required 48-hour window – this is non-negotiable on acreage properties where sprinkler lines, septic fields, and buried power to detached workshops run in places that aren’t obvious from the surface.
Day 1 afternoon through Day 2: Demo and post setting
Old fence comes down and hauls off the same day. We dig posts to 24 – 36 inches depending on soil and wind exposure, set them in concrete, and let them cure overnight. On Seagoville’s Blackland clay, that depth and cure time aren’t optional – shallow posts in expansive soil shift within two seasons, especially on open acreage where wind load is higher.
Days 2 – 3: Rails and pickets
Once posts are set, rails go on, then pickets. A 150-linear-foot fence with standard 6-foot dog-ear pickets runs two full working days with a crew of two. You’ll decide here whether you want pickets butted tight or gapped – gapped runs dry better in North Texas heat but show more light and weather through.
Day 3 – 4: Gates, hardware, and finishing
Gate posts get extra bracing and heavier hinges. We hang the gate, check swing and clearance, then apply a sealer or stain if you’ve chosen one. This is the stage where you confirm gate hardware – self-closing, latch style, and whether you want a walk-through gate on the side of the lot.
Final walkthrough
We walk the full run with you, check every post, rail, and gate, and leave the site clean. Any punch-list item gets fixed before we leave. That’s the whole sequence – two to four days for most Seagoville lots, longer for acreage with multiple runs or heavy demo.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for a Wood Fence in Seagoville
Wood fences aren’t one product. The choices below are the ones that actually matter on a Seagoville property.
- Cedar vs. treated pine: Cedar costs more per foot but resists rot and insects naturally, and it’s the better long-term pick for a fence exposed to North Texas heat and spring storms. Treated pine is cheaper upfront and holds up well enough if you seal it, but plan on a shorter lifespan on exposed acreage.
- Picket height (4, 5, or 6 feet): 6-foot is the standard privacy height and the most common request. 4-foot works for property-line marking on large lots. Anything over 6 feet in most Seagoville HOA communities needs approval before we build.
- Dog-ear vs. flat-top pickets: Dog-ear is the classic profile and sheds water well. Flat-top looks cleaner from the street but collects moisture on the top edge. Pricing is close between the two.
- Post spacing: 8-foot is standard. On windy open acreage we’ll often recommend 6-foot spacing for extra rigidity – it adds posts and cost but reduces sway and premature failure.
- Sealer or stain: Adds one day and a small per-foot cost, and it’s what separates a 10-year fence from a 5-year one in this climate.
What Wood Fence Costs in Seagoville, TX

Seagoville wood fence pricing runs $3,500 – $9,000 for most residential jobs. The lead number is real, not a teaser – here’s what moves you toward the top of that range and what keeps you down near the bottom.
The variables that push the price up or down:
- Linear footage: 100 feet with a single gate sits at the low end. 250 feet with multiple runs, corners, and two gates pushes toward $9,000.
- Material grade: Treated pine at the low end; cedar, thicker pickets, and 6-foot spacing at the top.
- Existing fence removal: Demo and haul-off add $300 – $700 depending on condition and length.
- Post depth and soil conditions: Blackland clay can demand deeper posts and more concrete, especially on the east and south edges where newer lots sit on fill dirt.
- Gates and hardware: A single walk gate adds $250 – $500. Driveway gates or double gates add more, and gate hardware choice matters more than it looks.
- Permit scope: If your lot sits on the Dallas County side of the line, permits and inspection timing add to the schedule and to the total.
A written estimate from us lists linear footage, material grade, post depth, gate count and hardware, demo, and sealer as separate line items. What typically isn’t included unless you ask: landscaping repair after dig, tree removal, and custom gate automation. Ask about the $1,000 off on projects over $10,000 if your fence is paired with other work, and 0% financing for 18 months if you want to spread the cost. Upfront pricing means the number on the estimate is the number on the final invoice.
See the difference
Before
After
Before
After
Before
AfterWhat Seagoville Homes Specifically Do to a Wood Fence Job
Seagoville sits on the Dallas – Kaufman county line, where the Blackland Prairie’s expansive clay soils meet a fast-growing exurban fringe – and that soil does things to a wood fence that a homeowner on sandy ground never deals with. Posts set in clay move with every wet-dry cycle. On the lot along US 175’s older corridor, where mid-century brick ranches sit on soil that’s been worked for decades, we see fences that leaned six inches in one direction after a wet spring. On the 2000s-and-newer tract subdivisions pushing toward the east and south edges of town, the issue is different – fill dirt under newer lots settles at a different rate than the surrounding clay, so post depths need to account for what’s actually under the surface, not what the plat map says.
Then there’s the county line itself. Builders working Seagoville routinely cross from Dallas County into Kaufman County mid-project, so permits, inspection timing, and even some material specs can differ block to block depending on which side of the line your lot falls. We verify which county your property sits in before we pull anything. If your project grows into a broader site plan, that’s part of a full Fence Installation in Seagoville scope, and homeowners often pair this with Paver Driveways in Seagoville to finish the front yard at the same time. Our Seagoville service page covers the full range of work we handle in the area. When fencing and concrete need to go in together, we’ll coordinate with our Concrete Driveways & Concrete Work in Seagoville crews so the schedule lines up. Our technicians have up to 12 years of experience, and every job is backed by the 730-Day Done Right Promise – if it’s not right, we make it right.
Serving Seagoville, TX – Our Local Coverage Area
We serve Seagoville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Wood Fence in Seagoville

Most residential wood fences in Seagoville take 2 – 4 days from demo to final walkthrough, with acreage jobs or jobs with complicated property lines running 4 – 5 days. Post curing alone takes one overnight, and we don’t cut that short. Call (888) 426-8078 for a timeline specific to your lot.
Permit requirements in Seagoville depend on which county your lot sits in and whether your HOA has separate rules – Dallas County and Kaufman County don’t always handle fence permits the same way. We check both before we schedule the job, and we pull and manage the permits where they’re required. Call (888) 426-8078 and we’ll tell you what applies to your address.
Yes – that’s exactly what the 811 utility locate on day one is for. On Seagoville acreage properties with septic fields, sprinkler systems, and buried power to detached workshops, we mark every line before digging so posts go in around them, not through them. Call (888) 426-8078 to schedule your free on-site estimate.
A 150-foot treated pine fence with one gate typically runs $4,500 – $6,500 in Seagoville, moving higher with cedar, extra gates, demo, or sealer. Site conditions on Blackland clay can push closer to $9,000 on larger acreage lots. Call (888) 426-8078 for an exact quote – estimates are free and line-itemized.
Every wood fence we install is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right, for two full years after the job. That covers workmanship, not normal weathering of the wood itself. Call (888) 426-8078 with any warranty question before you commit.
Get a Free Wood Fence Estimate in Seagoville
Call (888) 426-8078 to schedule your free on-site estimate. A live person answers any hour, and we’ll walk your property line with you, measure the run, talk through cedar versus treated pine, and hand you a line-item written quote before you leave the conversation. No pressure, no vague bids, no change-order surprises later. You’ll know exactly what your Seagoville wood fence will cost and how many days it’ll take. Our Fence Installation service is built to last, backed in writing.
Written by the team at Groundwork Construction Co.












