







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Rockwall, TX: What the Job Actually Costs
A vanity, tile and fixture package in Rockwall runs $9,000 – $28,000 when it covers a full bathroom surface overhaul: a new vanity and top, floor and shower-wall tile, and new fixtures. Most jobs take two to three weeks of working days, and the ones that go sideways are almost always the ones where vanity placement moved. Call (888) 426-8078 and we’ll price your exact scope, free, with a written line-item estimate. Every project is covered by our 730-Day Done Right Promise.
How We Run a Vanities, Tile & Fixtures Job, Stage by Stage

Vanities, tile and fixtures are three separate trades wearing one project number, and that’s why the sequence matters more than the materials. Here’s how the work actually unfolds.
Stage 1 – Measure and set-out (half a day). We template the room, confirm the vanity footprint and rough-in locations, and check the subfloor for movement and moisture. This is where you commit to vanity size, tile layout direction, and whether the shower gets a niche. Decide it now, not on day four.
Stage 2 – Demo and prep (one to two days). Old tile comes off, the vanity comes out, and we inspect what’s behind it. In Rockwall’s older shore cottages, that often means finding rot or a floor that’s out of level. Prep includes waterproofing at the shower and wet areas and, where required, an inspection before tile goes down. Demo is dusty and loud; plan to be out of that bathroom.
Stage 3 – Rough-in and substrate (two to three days). Plumbing and electrical move if you’re relocating the vanity, adding a second sink, or shifting lighting. Cement board or a bonded waterproof membrane goes in, then we set the floor tile first so the vanity sits on finished floor.
Stage 4 – Tile and grout (three to five days). Wall tile, shower surround, floor, then grout and caulk. Large-format tile is faster to set but less forgiving of a wavy wall. Small mosaic takes longer and costs more in labor. You choose the tile; we tell you honestly which ones suit your wall condition.
Stage 5 – Vanity, top and fixtures (two days). Cabinet set, countertop template and install, sinks, faucets, mirror, lighting trim, towel bars. Then a punch walkthrough. You’ll decide the countertop edge profile and faucet finish at stage one, not here, because lead times on stone can add a week.
The full sequence usually lands at 12 to 18 working days once materials are on site. Tile and stone lead times are the biggest schedule variable, and we’ll tell you up front which selections extend the calendar.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the money in this job sits in three decisions: the vanity, the tile, and the top. Here’s the honest trade-off on each.
- Vanity cabinet – stock vs. semi-custom. Stock cabinets are the fast, budget-friendly pick and fit standard openings. Semi-custom lets you hit an odd wall dimension and pick the door style. KraftMaid is a brand we work with when a homeowner wants a furniture-grade vanity that holds up to a wet room.
- Vanity top – quartz vs. granite vs. cultured marble. Quartz is the low-maintenance default and resists staining well; Cambria is a name that shows up in that conversation. Granite is durable and one-of-a-kind but needs sealing. Cultured marble is the cheapest and the first to show scratches.
- Floor tile – porcelain vs. natural stone. Porcelain is tougher, cheaper, and forgiving of slab movement. Natural stone looks better in a lake cottage and costs more to seal and maintain.
- Shower tile – large-format vs. mosaic. Large-format panels mean fewer grout lines and less scrubbing. Mosaic costs more in labor but grips better underfoot.
- Fixtures – finish and function. Brushed nickel and matte black hide water spots better than polished chrome. Kohler is a brand we specify when a homeowner wants a faucet and shower trim that match across the room.
- Prefab vs. site-built components. Prefab panels save time; site-built tile costs more and looks better. Modular and prefab building brands like Boxabl and Plant Prefab have made prefab a real option for additions, but for a bathroom surface job, site-built still wins on fit.
What Vanities, Tile & Fixtures Cost in Rockwall, TX

Expect $9,000 – $28,000 for a full vanity, tile and fixture package in Rockwall. A single-vanity refresh with floor tile lands near the bottom; a double vanity, full shower tile, and stone top pushes the top.
What moves the number:
- Size and sink count. A double vanity with two sinks adds plumbing, cabinet width, and countertop square footage. That’s the single biggest swing.
- Existing condition. Rot behind the old vanity, a soft subfloor, or a shower pan that was never waterproofed properly adds demo and rebuild time.
- Moving plumbing or electrical. Relocating a drain or adding a circuit for a lighted mirror is real money and, in some cases, a permit.
- Material grade. Porcelain vs. natural stone, stock vs. semi-custom cabinet, quartz vs. cultured marble. Each step up is a few hundred to a couple thousand.
- Permit scope. A cosmetic swap usually doesn’t need one; moving supply or drain lines does.
A written estimate from us lists demo, prep, waterproofing, tile, vanity, top, fixtures, and haul-away as separate lines. What it typically excludes: structural repair found mid-demo, and any tile or stone you haven’t selected yet. Upfront pricing, no surprises – the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Rockwall Homes Specifically Do to This Job
Rockwall’s housing stock splits in two, and the split changes this job. In subdivisions like Stone Creek and Chandler’s Landing, you’re working in 1990s – 2000s brick-and-stone builds with standard 5×8 bathrooms and slab foundations. In the original shore streets of 75032, you’ll find pier-and-beam lake cottages where the floor is out of level and the subfloor needs sistering before tile goes down. North Texas clay soils shrink and swell with the wet-dry cycle, so we check for foundation movement before we set a single tile – a floor that’s off by a quarter inch will telegraph through large-format tile. On the lake side, work within sight of the water can run into Corps of Engineers shoreline permitting, and that paperwork layer affects timelines more than most inland contractors expect. Bathroom jobs here aren’t usually part of a full Bathroom Remodeling in Rockwall unless the layout is changing; if it is, that’s the page to read. Homeowners often pair a tile and vanity job with roof work in the same visit, especially after a hail season, and we cover Tile Roofing in Rockwall and Specialty Roofing in Rockwall from the same crew.
Serving Rockwall, TX – Our Local Coverage Area
We serve Rockwall and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Rockwall

Two to three weeks of working days for a full package, and one to two weeks for a vanity and floor-tile refresh. Tile and stone lead times are the wild card. Call (888) 426-8078 and we’ll give you a realistic date range once you’ve picked materials.
Usually not if you’re swapping a vanity in place and tiling over existing surfaces. It flips to yes when you move supply or drain lines or add electrical. We’ll tell you which side of that line your scope falls on, and we pull the permits and pass the inspections when they’re required.
Yes. Most vanity, tile and fixture jobs done in Rockwall keep the existing rough-in and just update the surfaces and cabinet. Keeping the plumbing in place cuts cost and time. The trade-off: you’re limited to a vanity that fits the existing drain and supply locations.
The range runs $9,000 – $28,000 depending on size, material grade, and whether plumbing moves. A single vanity with porcelain floor tile sits near the low end; a double vanity with stone and full shower tile sits near the top. Call (888) 426-8078 for an exact quote – estimates are free.
Every project we complete is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right, for up to two years after we finish. That covers our workmanship. Product warranties on the vanity, fixtures, and tile come separately from the manufacturer. Our technicians bring up to 12 years of experience to the prep work that makes a tile job last.
Get a Free Estimate on Vanities, Tile & Fixtures in Rockwall
Call (888) 426-8078 and a live person answers, any hour. We’ll book a free on-site estimate, measure your bathroom, walk you through the material choices, and put the whole scope in writing – no line items left vague, no change orders later. If it’s part of a bigger project, start with our Bathroom Remodeling service and we’ll scope the whole room. We work throughout Rockwall and the surrounding towns. From foundation to finish line, built to last, backed in writing.
Written by the team at Groundwork Construction Co.












