







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Garland, TX: What It Takes and What It Costs
Metal roofing in Garland, TX typically runs $15,000 to $40,000 installed, depending on roof size, panel type, and how much decking or underlayment needs replacing underneath. Most homes here take two to four days for the roof itself, plus a day for tear-off and inspection. Call (888) 426-8078 and a live person answers, day or night, to line up a free on-site estimate.
The Garage Door Ledger: How a Metal Roof Gets Built on a Garland Home

Every metal roof we install in Garland follows the same five stages. Knowing the order keeps surprises off the invoice.
Day 1: Inspection, decking, and the pre-build meeting
We walk the roof and attic before anything comes off. On Garland’s older single-story brick ranches, that usually means checking whether the original 1×6 skip sheathing or later OSB decking has soft spots, and whether the fascia is holding up after decades of North Texas sun. You decide then whether to replace the full deck or patch it. A full redeck adds roughly $1,500 to $3,500 to the job; a patch is often under $500.
Days 1 – 2: Tear-off and structural checks
The old shingles come off, and we inspect rafters, ridge boards, and vent openings. On 1950s-60s Garland homes near the old downtown core, this is where we sometimes find sagging rafters or a ridge that needs sistering before panels go up. That scope change gets priced and approved in writing before we continue, never buried in a final bill.
Day 2: Underlayment and ice-and-water barrier
Synthetic underlayment goes down across the field, with a peel-and-stick barrier in valleys and around penetrations. This layer matters more than most homeowners expect; a metal roof is only as good as the membrane beneath it.
Days 2 – 4: Panel installation
Panels get fastened with concealed clips or exposed screws depending on the system, then trim, ridge caps, and flashing. Standing seam goes faster on a simple gable; corrugated and exposed-fastener panels move quicker per square but need careful gasket seating.
Final day: Punch list, cleanup, walkthrough
Gutter reattachment, ridge vent sealing, magnet sweep for nails, and a walkthrough with you. Every Garland job is covered by our 730-Day Done Right Promise. If something isn’t right, we come back and fix it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Metal Roofing Options in Garland: Picking Panels, Finishes, and Systems
The panel decision drives most of the price gap. Here’s the honest trade-off on each line:
- Standing seam (Kynar 500 finish): the most durable system, no exposed fasteners, 40-year plus lifespan. Highest cost at $18 to $28 per square foot installed. Suits homeowners who plan to stay out of the house for 20 years or more.
- Exposed-fastener corrugated panels: $9 to $14 per square foot installed. Faster to install, but the washers need periodic inspection. Best value for shops, porches, and rental properties.
- Metal shingles and stone-coated panels: $13 to $20 per square foot. Mimics the look of asphalt or tile, so HOA boards tend to approve them.
- Color and finish: standard colors run around $500 less than premium or custom hues; 24-gauge is sturdier than 26-gauge and worth the upgrade in hail country.
- Ventilation upgrades: ridge vent and soffit vents or an above-sheathing vented underlayment system. $400 to $1,200 depending on roof size.
Pairing this with Window Replacement in Garland or Impact Windows & Doors in Garland makes sense when hail protection is already on your mind. Both trades share the same hail exposure and the same neighbors asking the question.
What Metal Roofing Costs in Garland, TX

A typical metal roof in Garland runs $15,000 to $40,000. The lower end fits a compact 1950s ranch around 1,200 to 1,500 square feet; the high end covers a larger two-story home in the northern ZIPs with steep pitches and complex ridges.
What pushes a job toward the high end:
- Roof size and slope: steep pitches and multiple gables need more material and slower crew time.
- Decking condition: soft spots on aging Garland roofs add $1,500 to $3,500 when a full redeck is required.
- Panel grade: 24-gauge standing seam versus 26-gauge corrugated can swing the price by $6,000 or more on the same house.
- Fascia, soffit, and gutters: replacing rotted wood and reattaching gutters adds $800 to $2,500.
- Permits and inspection scope: a straightforward replacement is a modest line item; structural repair or venting additions may expand what’s required.
Our written estimates are line-item; the number we quote is the number you pay, and any change to scope is approved in writing before work continues. What’s not always included in any metal roofing quote anywhere: structural rafters needing sistering, chimney flashing rebuilds, skylight replacement, and fascia rot beyond the original roof line. We flag those on inspection so nothing surprises you later.
See the difference
Before
After
Before
After
Before
AfterWhat Garland Homes Specifically Do to Metal Roofing
Garland is a post-war streetcar suburb grown into a full city, and the building stock splits sharply. The older core (ZIPs 75040, 75041, 75042, near downtown and the original 1950s-60s subdivisions) is small single-story brick ranches. The northern and eastern additions (75044, 75043) are 1970s-90s and newer two-story brick-and-frame homes. That age split shapes the job: a metal roof on a 1950s ranch often means addressing skip sheathing and original fascia; a metal roof on an 1980s two-story means checking whether the original three-tab was ever overlayed.
Garland runs its own inspections and permitting rather than deferring to Dallas County. Hail and high wind events are routine here, so impact-rated metal systems and wind uplift ratings matter more than in calmer markets. And because the Blackland Prairie clay shifts dramatically between wet springs and hot dry summers, roof-to-wall flashing and drainage details get more attention than they would on stable soils.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Metal Roofing in Garland

Two to four days on most Garland homes, with larger two-story homes or full redeck situations stretching to five. Call (888) 426-8078 for a timeline tied to your specific roof.
Yes, Garland issues roofing permits for roof replacement, and we handle the application and inspection scheduling for you. Every job passes final inspection before we consider it done, and the permit is documentation that protects you at resale. Call (888) 426-8078 to talk permit scope.
Not on Garland homes, and it should not be. Metal systems need a clean deck, proper underlayment, and correct fastening to hold against hail and North Texas wind. Overlay shortcuts void manufacturer warranties.
Garland metal roofs run $15,000 to $40,000 installed, with most single-story ranch homes landing in the middle of that range. Your exact number depends on roof size, panel type, decking condition, and trim. Call (888) 426-8078 for a written line-item estimate, free.
Every metal roofing job we do in Garland carries our 730-Day Done Right Promise for workmanship, on top of the panel manufacturer’s material warranty. If it isn’t done right, we make it right. Call (888) 426-8078 to walk through coverage.
Ready for a Metal Roofing Estimate in Garland?
Metal roofing is a 20-40 year decision. Get an on-site estimate first, with the scope, panel options, and pricing in writing. Call (888) 426-8078 and we’ll schedule a free estimate for your Garland home. A live person answers around the clock, no voicemail. When work starts, background-checked technicians arrive in uniform and preserve our 730-Day Done Right Promise from first day to final walkthrough. Metal roofing in Garland done properly, priced upfront, backed in writing.
Written by the team at Groundwork Construction Co.












