







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Window Installation in Garland, TX: what it takes and what it costs
Window installation in Garland typically runs $4,500 – $15,000 for a whole-house replacement, or $8,000 – $25,000 if you’re installing impact-rated units built for North Texas hail and wind. A standard installation takes one to three days depending on how many openings we’re setting. Call (888) 426-8078 for a free on-site estimate – a live person answers, day or night.
If you’ve watched a storm roll through Garland and heard a window rattle in its frame, you already know why this job matters. We’re Groundwork Construction Co., and window installation is one of the seven trades we run across Garland and the surrounding communities. Every job carries our 730-Day Done Right Promise – if it’s not done right, we make it right.
How Window Installation works, stage by stage

We don’t hand you a number over the phone and hope it holds. Here’s the actual sequence, with the decisions you own at each step.
Day 1 – Measure and confirm
We walk every opening, measure rough openings and frame depth, and check whether the existing units are aluminum single-pane, wood double-hung, or earlier replacements with questionable flashing. You decide the material and glass package at this point. This visit is where we catch surprises – soft framing, old aluminum that won’t come out cleanly, a sill that’s been painted shut for years.
Days 2 – 7 – Order and permit
Units are ordered to the confirmed measurements. Lead times typically run five to fourteen days depending on brand and whether you’ve chosen a stock or custom size. Meanwhile we pull the County permit – Garland runs its own permitting and inspections rather than deferring to Dallas County, so the paperwork happens locally. Our technicians have up to 12 years of experience and know exactly what the inspectors look for.
Days 8 – 9 – Prep and demo
Furniture gets moved or protected, floors covered, and existing units come out. We inspect the rough opening for rot or deflection before any new unit goes in. If we find a soft sill, you hear about it the same day with photos and a written price – no surprise number after the fact.
Days 9 – 10 – Set, flash, and finish
New units go in with fresh flashing, insulation, and a continuous seal. Trim and interior finish are reinstalled or replaced. Most homes take one or two days for this stage depending on how many openings and how much trim work is involved.
Day 10 – Punch list and inspection
We do a final walkthrough with you, operate every window, check the locks, and clean up. The County inspector signs off on the permit. That’s when your 730-Day Done Right Promise clock starts.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between for your Garland windows
- Vinyl frames – the most common choice for Garland homeowners chasing value. Solid thermal performance, never needs painting, and the price point is the friendliest. Trade-off: vinyl can fade or distort on south- and west-facing walls in a Houston-adjacent climate.
- Aluminum frames – slim sightlines and modern look, and they’re already in most 1970s-80s Garland homes. Lower insulating value than vinyl unless you go with a thermally broken frame.
- Fiberglass frames – stable in heat and cold, holds a wide glass package. More expensive than vinyl, but the right call if you’re keeping the home long-term and want the frames to outlast the glass.
- Wood frames – warm look and the traditional option for older ranches near downtown Garland. Requires maintenance, and you’ll pay a premium. Brands like Therma-Tru and ES Windows offer strong wood-framed and clad options worth seeing in person.
- Glass packages – Low-E, argon fill, impact-rated laminated glass. Impact glass is the single biggest upgrade for a North Texas home given the hail and wind loads this region sees. Expect it to push a project toward the top of the range, but the insurance conversations alone often justify it.
- Operating style – single-hung, double-hung, casement, or fixed. Double-hung is the default replacement for classic Garland ranches. Picture or fixed windows suit modern spaces where you want maximum glass.
What Window Installation costs in Garland, TX

Most Garland window projects land between $4,500 and $15,000, with impact-rated installation at $8,000 – $25,000. That’s a real number, not a placeholder – and it’s the number in your written, line-item estimate before work starts.
| Line item | Garland range |
|---|---|
| Whole-home standard window replacement | $4,500 – $15,000 |
| Impact-rated window installation | $8,000 – $25,000 |
| Per-opening repair (flash, seal, trim) | quoted as part of the job |
| Framing or sill repair (if discovered) | added after inspection, in writing |
What pushes a job to the low end? A typical 1950s-60s ranch near the Garland core with stock-size openings, vinyl frames, and no structural surprises. What pushes it high? Larger or custom-size units, impact glass, fiberglass or wood frames, second-story access in the northern ZIPs, or discovered rot in the framing.
What’s included: measuring, permit pull, removal and disposal, new flashing, insulation, trim replacement, final inspection, and the 730-Day Done Right Promise. What’s typically not: structural reframing beyond the opening, drywall patching inside the room, and paint touch-up. Those we scope separately, with a written price before we touch the wall. Expect a written quote with no change orders on the listed scope – and no surprise fees.
See the difference
Before
After
Before
After
Before
AfterWhat Garland windows specifically demand
Garland is a post-war streetcar suburb that grew into a full city, and its building stock splits hard along construction era. The older core around downtown and the original 1950s-60s tract homes – most of them in ZIPs 75040, 75041, and 75042 – have single-pane aluminum or wood windows that are often past their service life. Out toward 75044 and 75043, the 1970s-90s and newer subdivisions present larger, wider openings and different framing. That age split is the thing we learn first on every property, because it changes how a window is set, not just how it looks.
North Texas weather writes the second rule. Hail and high wind events are routine in Garland, and window failures show up as cracked panes, lost seals, and flashing that gives way after a hard storm. For customers in impact-glass territory we steer toward laminated glass from brands like ES Windows, and Therma-Tru frames for wood-look replacements where the ranch aesthetic matters. On the older ranches, our first call is usually about whether the original aluminum can come out cleanly – the framing around a 1960s opening often needs more attention than the glass itself. We know which decade we’re walking into before we bid.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Window Installation in Garland

Most Garland window installations take one to three weeks from contract to final inspection, with the actual install running one to two days on site. Order lead time is the biggest variable – stock sizes run five to seven days, custom sizes closer to two weeks. Call (888) 426-8078 for a realistic schedule for your project.
Yes – replacement window installation in Garland requires a permit and a final inspection, because the city runs its own permitting and inspection cycle rather than handing it off to Dallas County. We pull the permit, schedule the inspection, and handle the paperwork. You don’t chase it. Call (888) 426-8078 with questions about your specific property.
In most cases, yes – a like-for-like replacement swaps the unit and reinstalls existing trim without structural work. Where we find rot or a soft sill (common on the 1950s-60s ranches around the Garland core), we stop and quote the framing repair in writing before proceeding. Call (888) 426-8078 to schedule an assessment and a free estimate.
Budget roughly $450 – $900 per opening for standard installation in Garland, and $900 – $1,600 per opening for impact-rated glass. Whole-home totals fall in the $4,500 – $15,000 range for standard and $8,000 – $25,000 for impact. Call (888) 426-8078 for an exact quote – estimates are free and the number is written before work starts.
Your installation carries our 730-Day Done Right Promise – one of the longest workmanship guarantees in residential construction, and one we put in writing. Manufacturer warranties on the units are separate and run through the brand. Call (888) 426-8078 for a copy of the warranty language before you sign anything.
Homeowners in Garland often pair this work with a Windows & Doors in Garland project scope that includes exterior doors and sliders, or with a new Wood Fence in Garland to finish off the yard side of the job. If your exterior project spills into the side yard, a Chain Link Fence in Garland is worth pricing at the same time. For the wider offerings, see our Windows & Doors service, and for the full picture of what we cover, our Garland service area page has the details.
Get a free Window Installation estimate in Garland
Call (888) 426-8078 to schedule your free on-site estimate for Window Installation in Garland. A live person answers, day or night – no voicemail. We’ll measure every opening, talk through glass and frame options, and hand you a written, line-item price with no surprise change orders. We also offer $1,000 off projects over $10,000 and 0% financing for 18 months. From foundation to finish line, we’re the contractor Garland homeowners call when they want it done right and backed in writing.
Written by the team at Groundwork Construction Co. of Mesquite.












