







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Driveway Repair & Replacement in Garland, TX: What It Takes and What It Costs
Driveway Repair & Replacement in Garland, TX runs $5,000 to $14,000 for a full replacement, and most repairs sit well below that. A typical job takes two to five working days from tear-out to cure, depending on whether we’re patching, resurfacing or pouring fresh. Call (888) 426-8078 and we’ll walk you through what your driveway actually needs before anyone quotes a number.
How Driveway Repair & Replacement Works, Start to Finish

Every driveway problem looks the same from the curb: cracked, sunken, ugly. Underneath, they’re not the same job. Here’s the sequence we follow so nothing gets skipped and nothing gets billed that you didn’t approve.
Day 1: Site visit, measurements and the honest call on repair vs. replace
We walk the slab, check drainage slope, measure cracking depth and probe the subgrade at the low points. You’ll get a written line-item estimate the same visit that tells you plainly whether a repair will hold or whether you’re about to spend twice. That decision is yours to make, and we don’t push toward the bigger number.
Day 1 – 2: Demolition and haul-off
For a replacement, the old slab comes out with a skid-steer and breaker, usually in a few hours for a standard two-car width. Debris leaves the same day. If a repair is the right answer, this stage shrinks to cutting out the failed section cleanly so the patch has square, sound edges to bond against.
Day 2 – 3: Subgrade prep, grading and drainage correction
This is the stage that decides whether your new driveway lasts 25 years or 8. We re-compact the base, correct the slope so water leaves the garage instead of finding it, and set forms. On Garland’s expansive clay, that means over-excavating and re-packing with select fill rather than pouring over ground that’s already moving. You’ll approve the final slope and the location of any expansion joints.
Day 3 – 4: Pour, finish and control joints
Concrete placement happens in one morning. Finishing includes your choice of surface texture, and control joints get cut at the right spacing so the concrete cracks where we tell it to instead of where it wants. This is your chance to confirm color, texture and edge detail before the material sets.
Day 4 – 5 onward: Cure, joint seal and drive-on schedule
Concrete needs roughly 7 days before normal vehicle traffic and 28 days to reach full strength. We’ll tell you which days are foot-only. Asphalt is different: it can take traffic within 24 to 48 hours but should sit about 30 days before sealing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for a Garland Driveway
Most homeowners get stuck here, so let’s lay out the realistic choices for a repair or replacement in Garland and what each one honestly costs you in money and maintenance.
- Full concrete replacement: the most common choice for a failed slab. Poured 4-inch slab with rebar or mesh, $4,500 – $12,000 depending on size and access. Long lifespan, easy to match to the house, but it will crack eventually unless the base is right.
- Sectional concrete repair: cutting out one bad panel and repouring it. Far cheaper when only part of the slab has failed, but only worth it if the base under the rest of the drive is still sound.
- Asphalt paving: $3,500 – $9,000, laid over a compacted base. Cheaper to install, smooth underfoot, but needs resealing every few years and softens in July heat.
- Pavers: the premium option, and the one that lets you pull up a section for utility work without a jackhammer. Higher upfront, and if the wider project is a full Driveway & Pavers in Garland scope, that’s where we set the material plan.
- Sealing and crack repair: a $250 – $700 protective step for a driveway that’s still structurally fine. It won’t fix a failure, but it slows surface wear.
Full detail on surfaces, borders and finishes lives on Driveway & Pavers, so we won’t repeat it here. This page stays on the repair-or-replace decision.
What Driveway Repair & Replacement Costs in Garland, TX

Plan on $5,000 – $14,000 for a full driveway replacement in Garland, $4,500 – $12,000 for fresh concrete, and a few hundred to a couple thousand for a targeted repair. Here’s the line-item breakdown we write into estimates.
| Item | Typical range |
|---|---|
| Full driveway replacement | $5,000 – $14,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Sealing and crack repair | $250 – $700 |
What pushes a Garland job toward the top of that range:
- Size and access. A wide two-car drive with a turnaround costs more than a single strip, and a narrow side-yard gate means more hand work.
- Existing condition. Deep clay movement, tree roots under the slab or a failed base all mean more demolition and fill.
- Drainage correction. If water currently runs toward the garage, re-grading adds time and material.
- Utilities in the path. Relocating a sprinkler main, gas stub or downspout line adds cost that only shows up after tear-out.
- Material grade and finish. Decorative finishes and thicker slabs push concrete toward the top of its range; asphalt sits lower because it’s a thinner build.
Your written estimate lists what’s included and, just as important, what isn’t: stump grinding, utility relocation and landscaping repair get called out separately so there’s no surprise line on the final invoice. Pricing is upfront, with 0% financing for 18 months and $1,000 off projects over $10,000 available.
See the difference
Before
After
Before
After
Before
AfterWhat Garland Homes Specifically Do to This Job
Garland is a post-war streetcar suburb that grew into a full city, and its driveways split along a construction-era line. Around the older core, the ZIPs we cover (75040, 75041 and 75042), you’re working on driveways poured for 1950s and 60s single-story brick ranches. Those slabs have often already been patched once, and the base under them has taken decades of Blackland Prairie clay swelling and shrinking between wet springs and dry summers. Out toward the newer subdivisions on the north and east side, we’re more likely to see wider drives poured on better-compacted ground that just need surface work. The real difference in Garland is that the city runs its own permitting and inspections rather than deferring to Dallas County, so a replacement that changes the footprint or the drainage path gets inspected on site. And on those mid-century ranches, the hidden cost is often not the concrete at all: tree roots, an old sprinkler main or a garage slab that’s moved with the clay can turn a simple pour into a base rebuild. We work all of Garland, and we’ve seen every one of these failure modes enough times to price them correctly.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Driveway Repair & Replacement in Garland

Most replacements run two to five working days on site, then about a week before you drive on the new concrete. Smaller repairs finish in a day or two. The cure time is the slow part, not the labor, and we schedule around it. Call (888) 426-8078 for a timeline built around your specific driveway.
A like-for-like repair usually doesn’t need one, but a replacement that changes width, layout or grading typically does. Garland’s own building department handles the review. We pull the permit and coordinate the inspection so you’re not chasing paperwork. Call (888) 426-8078 and we’ll confirm what your job needs.
In most cases, yes. Utilities run beneath the driveway rather than through it, so a standard replacement doesn’t touch them. When a sprinkler main, gas stub or downspout does sit in the pour zone, we catch it at the site visit and quote it before work starts, not after. Call (888) 426-8078 to set up the walkthrough.
A targeted repair often runs a fraction of a replacement, and a full replacement lands at $5,000 – $14,000. The deciding factor is the base, not the surface: if the subgrade is sound, a repair earns its keep. Call (888) 426-8078 for an exact quote, and the estimate is free.
All our work is backed by the 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. Call (888) 426-8078 and we’ll put the terms in writing before we start.
Homeowners comparing bids on a bigger project often line up a couple of related jobs at once. If you’re expanding the property, Junior ADU & Interior Conversion in Garland covers the living-space side, and ADU Site Prep & Utilities in Garland handles the ground and utility work that a new structure depends on.
Get a Free Driveway Repair & Replacement Estimate in Garland
Call (888) 426-8078 and a live person answers, any hour, any day. We’ll ask a few questions about your driveway, set a free on-site estimate, and give you a written line-item quote with the repair-versus-replace call spelled out clearly. No pressure, no hidden line items, and a background-checked, uniformed technician on the job from start to finish.
Written by the team at Groundwork Construction Co.












