







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Balch Springs: What the Job Actually Involves
Backsplash, tile and flooring work in Balch Springs usually runs $800 – $2,500 for a backsplash on its own, and $14,000 – $45,000 when tile and flooring are folded into a full kitchen remodel. A backsplash by itself is a two-to-three day job. Flooring depends on square footage and whether the subfloor has to be leveled first. Call (888) 426-8078 and we’ll walk you through scope, material choices and a written line-item quote before anything gets ordered.
From Demo to Grout: How a Tile and Flooring Job Runs

Here’s the sequence we follow on a typical Balch Springs tile and flooring project. Five stages, and you’ll know what you’re deciding at each one.
Stage 1: Site walk and field measurements (day 1)
We measure every wall that’s getting tile, check the subfloor or slab for level, and confirm where outlets, switches and plumbing stub-outs land. This is also when we flag anything that will change the scope, like a slab crack or a soft spot in a pier-and-beam floor. You decide the tile layout at this stage, not later; moving a herringbone pattern after the tile is cut costs real money.
Stage 2: Demo and prep (days 2 – 4)
Old backsplash comes off, old flooring comes up, and adhesive residue gets ground or scraped clean. On a slab we check for cracks and patch them. On a pier-and-beam floor we check for deflection, because tile over a bouncy subfloor will crack within a season. You decide at this stage whether to add a backer board or self-leveling compound, which is a $300 – $900 line depending on square footage.
Stage 3: Layout and dry-fit (day 4 – 5)
We lay tile out dry so you can see the pattern, grout line width and where cuts land before anything is set. Grout joint size (1/16″, 1/8″, 3/16″) is a decision you make here, not the installer. This is also when we cut and dry-fit around outlets, so the covers sit flush after grout.
Stage 4: Set, cure and grout (days 5 – 7)
Thinset goes down, tile gets set, and it cures for a full 24 hours before grouting. Skipping the cure is the single most common cause of cracked grout lines. Grout type matters too: epoxy grout is more stain-resistant but harder to work with and adds $400 – $900 on a typical backsplash.
Stage 5: Sealing, caulk and final walk (day 7 – 9)
Natural stone gets sealed; porcelain usually doesn’t need it. We caulk the joint where the backsplash meets the counter, because that’s the seam that moves when the house settles. You walk the job with us, sign off, and the 730-Day Done Right Promise starts from that date.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Pick Your Materials Before You Sign: What the Trade-Offs Actually Are
Here’s what you’re choosing between on a Balch Springs backsplash, tile and flooring job, and the honest trade-off on each.
- Ceramic backsplash tile ($4 – $12/sq ft installed): the workhorse option. Easy to cut, forgiving on walls that aren’t perfectly flat, holds up fine behind a range as long as it’s sealed. Doesn’t have the depth of natural stone.
- Porcelain or glass mosaic ($8 – $22/sq ft): glass catches the eye in a small kitchen, and porcelain mimics stone at a lower price. Glass shows smudges and requires a smooth, flat substrate; older pier-and-beam walls in Balch Springs are rarely that smooth.
- Natural stone (travertine, marble, slate: $12 – $35/sq ft): the most character per square foot, and the most maintenance. Sealer has to be reapplied every 12 – 24 months in a humid Central Texas kitchen.
- Luxury vinyl plank flooring ($3 – $8/sq ft installed): the fastest install, most water-resistant, best fit for a kitchen that sees spills. Doesn’t feel like tile underfoot.
- Porcelain tile flooring ($6 – $14/sq ft): the classic choice for a reason. Handles water, lasts decades, and pairs with the same tile family on the backsplash. Cold underfoot; a $4 – $9/sq ft in-floor heat mat is an add-on.
- Slab or large-format tile (24″x48″ or larger: $12 – $25/sq ft): fewer grout lines, most modern. Requires a dead-flat substrate, which adds prep cost on older Balch Springs floors.
KraftMaid cabinetry is a natural pairing if the tile work is part of a broader kitchen update, and Kohler fixtures fit the same rhythm when you’re refreshing the sink at the same time. Homeowners often pair this with Vanities, Tile & Fixtures in Balch Springs to bring bathroom tile into the same material family.
What Backsplash, Tile & Flooring Costs in Balch Springs, TX

On their own, a backsplash runs $800 – $2,500 and tile flooring runs $6 – $14 per square foot installed. Folded into a full kitchen remodel, the whole project lands in the $14,000 – $45,000 range. Here’s what moves that number.
- Scope: a backsplash alone is a two-to-three-day job. Backsplash plus flooring plus a new counter is a two-week job with more line items.
- Existing condition: a cracked slab, a soft pier-and-beam subfloor or a wall that isn’t plumb can add $500 – $2,500 in prep alone.
- Relocating plumbing or electrical: moving a sink, adding an under-cabinet outlet or shifting a gas line adds $400 – $2,000 per move plus permit review.
- Material grade: ceramic at the low end, natural stone or large-format slab at the high end; the same square footage can vary $6,000 or more.
- Permit scope: a straight tile swap usually doesn’t need one. A job that moves a plumbing line or adds a gas connection does, and that adds inspection scheduling time.
Every written quote we hand you is line-item: tile, setting materials, prep, labor, permit, disposal. What’s typically not in a tile quote unless you ask: furniture moving, cabinet removal on a full tear-out, and finished trim carpentry around a floating tile edge. We call those out up front so no surprise change order shows up mid-job.
See the difference
Before
After
Before
After
Before
AfterWhat Balch Springs Homes Actually Do to a Tile and Flooring Job
Balch Springs sits on the Texas blackland prairie, and that expansive clay does work on a house whether anyone asks it to or not. After a heavy rain, pier-and-beam homes in older neighborhoods around ZIP 75180 shift and settle, and the first thing you see inside is uneven floors, sticking doors and hairline cracks opening in grout lines that were tight last spring. Most of the housing stock here is mid-century to 1970s single-story ranch, often on pier-and-beam or shallow slab, still carrying original plumbing and electrical. That matters for tile work in three specific ways.
First, a tile floor laid over a subfloor that hasn’t been checked for deflection will crack, period. We check pier-and-beam joists before we ever set a tile. Second, a slab that’s cracked has to be evaluated before a new floor goes over it; tiling on top of an unresolved crack just hides it until the next wet season. Third, original plumbing stub-outs behind a kitchen wall usually need to move when a backsplash goes up, and that turns a tile job into a permitted plumbing job. Permits in Balch Springs go through the city’s building department, and we pull them, schedule the inspection and hand you the signed-off record. If the tile work is part of a wider scope, our Kitchen Remodeling in Balch Springs page covers the bigger picture; tile and flooring is the piece we’re covering here, and it’s a project that touches nearly every Balch Springs kitchen we walk into. We cover the full Balch Springs service area, and homeowners often pair this with Tub-to-Shower Conversion in Balch Springs if the tile work is going to run through the whole house.
Serving Balch Springs, TX – Our Local Coverage Area
We serve Balch Springs and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Backsplash, Tile & Flooring in Balch Springs

A backsplash alone takes two to three days. Backsplash plus flooring takes seven to nine working days, factoring in cure time between set and grout. A full kitchen remodel with tile and flooring rolled in runs three to five weeks. Call (888) 426-8078 for a schedule built around your project, not a generic estimate.
A straight tile replacement usually doesn’t require a permit. Any job that moves a plumbing line, adds a gas connection or relocates electrical does. We pull the permits and schedule the inspections, and you get the signed-off record at completion. Call (888) 426-8078 and we’ll tell you upfront whether your specific project needs one.
Yes, and most backsplash jobs don’t touch plumbing. We tile around existing outlets, sink and range by cutting and dry-fitting first. Moving a stub-out is a decision you make in the walk-through, not a surprise mid-job. Call (888) 426-8078 if you want to know which option fits your kitchen.
A backsplash typically runs $800 – $2,500 installed, depending on square footage and material grade. Glass or natural stone pushes toward the top of that range; ceramic sits at the low end. Tile flooring adds $6 – $14 per square foot. Call (888) 426-8078 for a written line-item quote on your exact job; estimates are free.
Every tile and flooring project is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship, not damage from a foundation shift, which is why we check the subfloor and slab before we start. Call (888) 426-8078 with questions on what the promise covers.
Get a Free Tile and Flooring Estimate in Balch Springs
Call (888) 426-8078 to schedule a free on-site estimate for backsplash, tile and flooring in Balch Springs. A live person answers 24/7, and we’ll set a time that works. On the visit we measure, check the subfloor and slab, walk you through material choices with real prices, and leave you a written line-item quote. No pressure, no surprise numbers. If the tile work is part of something bigger, our Kitchen Remodeling service covers the full scope, and 0% financing for 18 months plus $1,000 off projects over $10,000 is available.
Written by the team at Groundwork Construction Co.












