







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Mesquite: What It Costs and How Long It Takes
Backsplash, tile & flooring work in Mesquite usually runs $14,000 – $45,000 for a full kitchen and adjoining area refresh, with backsplashes alone at $800 – $2,500 and floor tiling priced by the square foot. A backsplash by itself is a 1 – 2 day job; combining new backsplash with tile flooring across a kitchen and breakfast nook typically takes 4 – 7 working days once materials are on site. Call (888) 426-8078 and we’ll walk your space, measure it, and hand you a written line-item estimate.
How the work actually runs, day by day

Tile work looks simple from the outside. It isn’t. The failures we get called back to fix in Mesquite almost always trace to what happened in the first four hours, not the last four. Here’s the real sequence.
Stage 1: Demo and surface assessment (day 1)
We pull the old backsplash, tile, and any damaged backer board. Under 1950s – 1970s brick-veneer ranches, this is where surprises live: drywall that crumbled behind old mastic, or a previous layer of tile glued directly to painted drywall with no substrate at all. We open it up, photograph what’s behind the wall, and decide together whether the substrate gets replaced or patched. That call affects both the schedule and the number.
Stage 2: Substrate and layout (day 2)
Cement backer board or a waterproof membrane goes in, screwed and taped, then we set the layout. This is your biggest decision point. Tile size determines grout line count; grout line count determines how the finished wall reads from across the room. A 3×12 subway laid horizontally looks calm. The same tile stacked vertically looks taller and more modern. We dry-lay the pattern on the floor and let you see it before a single tile gets thinset.
Stage 3: Setting tile (days 2 – 4)
Backsplash goes up first because it’s faster and gets you a visible win early. Floor tile follows, working from the farthest corner toward the exit so nobody walks on fresh thinset. Large-format floor tile (24×24 and up) needs a flatter substrate and more careful lippage control than 12×12, so it eats an extra half day. We check for hollow spots with a tap test before grout.
Stage 4: Grout and cure (day 4 – 5)
Grout goes in, gets tooled, and then it cures. You don’t walk on it for 24 hours, and you don’t seal it for longer than that. This is a real time cost, not a scheduling excuse. We tell you the exact hour you can walk on it and the hour you can put the coffee maker back.
Stage 5: Caulk, outlet plates, final walkthrough
Caulk at the counter-to-backsplash seam and where tile meets cabinet. Outlet and switch plates go back on. Then we walk the job together with a level and a flashlight and you sign off on the punch list before we leave. If something’s off, it’s on the list, not a phone call next month.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The tile and material choices, with honest trade-offs
Here’s what actually gets chosen on Mesquite jobs, and what each one costs you in money and maintenance.
- Ceramic subway (3×6 or 3×12): the value pick. Easy to cut, forgiving on imperfect walls, and replacement tiles are cheap if one cracks. Downside: softer glaze, less scratch resistance near a cooktop.
- Porcelain tile: denser, more water-resistant, holds up to heat better. Pricier per square foot and harder to cut cleanly, so labor goes up too.
- Natural stone (travertine, marble, slate): gorgeous and unforgiving. Needs sealing every year or two in North Texas heat, and it stains if you don’t.
- Large-format floor tile (24×24+): fewer grout lines, easier to clean. Requires a flatter substrate, which sometimes means a self-leveling pour you didn’t budget for.
- Luxury vinyl plank as a floor alternative: cheaper and warmer underfoot, but it isn’t tile and won’t read as tile at resale.
- Grout choice: sanded vs. unsanded vs. epoxy. Epoxy grout costs more upfront and lasts years longer without staining. On a kitchen backsplash behind a gas range, it’s worth the upgrade.
What Backsplash, Tile & Flooring costs in Mesquite, TX

Typical Mesquite pricing for the work itself:
| Scope | Price range |
|---|---|
| Backsplash installation only | $800 – $2,500 |
| Tile flooring (per room, standard size) | $4,000 – $13,000 |
| Backsplash + floor tile combined | $14,000 – $45,000 |
| Countertop replacement (if paired) | $2,000 – $6,500 |
The variables that push a job from the low end to the high end:
- Square footage and layout complexity. A straight galley kitchen is fast. An L-shape with a peninsula means more cuts, more waste, and more time.
- Condition behind the wall. Rotted drywall or a missing substrate adds a day and materials. This is common in 1960s Mesquite ranches.
- Material grade. Ceramic vs. porcelain vs. natural stone can swing the material line by 2 – 3x.
- Whether you’re moving anything. Relocating an outlet, a gas line, or a sink changes the scope. Any plumbing or gas relocation needs a permit in Mesquite, and that adds inspection time to the schedule.
- Pattern and prep. Herringbone, chevron, and large-format layouts cost more in labor because every cut is a custom cut.
Our written estimates include demolition, substrate prep, setting materials, grout, caulk, and cleanup. They don’t include structural repairs found behind the wall or cabinet replacement – those get quoted separately once we see them, so nothing shows up as a surprise line item. Backsplash, tile & flooring done as part of a Kitchen Remodeling in Mesquite project is scoped in one estimate so you’re not coordinating three trades.
See the difference
Before
After
Before
After
Before
AfterWhat Mesquite homes specifically do to this job
Mesquite is essentially built out. The city was fully developed by the 1980s, which means nearly every tile job here is a renovation, not new construction, and the houses we work on are mostly 1950s – 1970s brick-veneer ranches with original or partially-updated kitchens. That changes the job in a few specific ways. Original tile from that era is often set on a mortar bed over wire lath, and pulling it out is heavier, dustier work than modern thinset. Kitchens along the older streets south of I-30 tend to have smaller footprints, so large-format tile layouts need more careful planning to avoid awkward slivers at cabinets.
North Texas heat and the black clay soil under Mesquite matter too. That clay swells and shrinks with wet-dry cycles, and foundation movement shows up in tile as hairline cracks along grout lines or tiles that pop loose at the edges. When we see a pattern of cracking, we flag it – laying new tile over a floor that’s still moving is money thrown away. Hail season doesn’t touch interior tile, but the storm-driven rebuilds across Mesquite keep a lot of homes in a state of partial renovation, and we often walk into a kitchen where a prior repair left a mismatched patch we have to work around.
Serving Mesquite, TX – Our Local Coverage Area
We serve Mesquite and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Backsplash, Tile & Flooring in Mesquite

A backsplash alone takes 1 – 2 working days. Backsplash plus floor tile across a standard kitchen runs 4 – 7 working days, plus 24 hours of grout cure before you can walk on it. Add a day if the substrate has to be rebuilt. Call (888) 426-8078 for a schedule based on your actual square footage.
Cosmetic tile and backsplash work doesn’t require a permit. Anything that touches plumbing, gas, or electrical – moving an outlet behind the backsplash, relocating a sink line – does, and that inspection adds time to the schedule. We handle the permit paperwork when the scope calls for it.
Yes. Most Mesquite backsplash jobs go in without moving cabinets or counters. If you’re replacing the countertop at the same time, the backsplash goes in after the new top is set. That’s why homeowners often pair this with Vanities, Tile & Fixtures in Mesquite when they’re updating a kitchen and bath in the same stretch.
Backsplash installation alone runs $800 – $2,500. Full backsplash plus floor tile runs $14,000 – $45,000 depending on square footage, material, and what’s behind the wall. Call (888) 426-8078 for an exact quote – estimates are free and itemized.
Every tile and flooring project we complete is covered by our 730-Day Done Right Promise. If something isn’t right, we come back and make it right, in writing, for two full years after we hand you the keys.
Get a written estimate for your Mesquite tile job
Call (888) 426-8078 and a live person answers, day or night. We’ll schedule a free on-site estimate, measure your kitchen and floors, show you material samples, and hand you a line-item quote with a fixed price and no change-order surprises. If you’re planning a wider scope, ask about our Kitchen Remodeling service and see how Mesquite homeowners pair tile work with a full refresh. The call takes ten minutes and the estimate costs nothing.
Written by the team at Groundwork Construction Co.












