







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in Seagoville, TX: What the Job Actually Involves
An iron fence in Seagoville, TX typically runs $3,500 – $9,000 for a standard residential run, and most jobs take three to five working days from layout to final set. The work breaks down into a survey and layout day, a footing-and-set day, and finish days for panels, gates and touch-up. We’re licensed and insured, and every written quote is line-itemed so you see post count, gate hardware and finish costs before anyone digs. Call (888) 426-8078 to schedule your free on-site estimate.
How We Build an Iron Fence, Stage by Stage

This isn’t a job where you drop a crew and hope. The order matters, and you’ll have two real decisions to make along the way.
Day 1: Survey, Layout and Utility Locate
We walk the property line with you, confirm the run in linear feet, and mark post centers with a string line so corners stay true. Before any digging, the utility locate is called in and cleared. You decide the gate positions and swing direction on this day, because moving a gate later means tearing out a set post. On Seagoville lots along US 175 where the run borders a fence that’s already leaning, we flag that section now so it doesn’t become a surprise mid-job.
Day 1 – 2: Demolition and Post Setting
Old material comes out and hauls away. Post holes go down below the frost-and-heave line for our area, set in concrete, and we let the footings cure before panels hang – rushing this is how posts lean a season later. You confirm post spacing and height here (4 ft, 5 ft or 6 ft are the common calls). Expect the footings to sit overnight.
Day 2 – 3: Rails, Panels and Alignment
Top and bottom rails are set, then pickets or panels are installed and aligned against the string line. This is the slow stage on ornamental work because every section has to line up with the next. You’ll see the fence from the street while it’s partially up – that’s when we catch a high picket or a sagging rail before it’s locked in.
Day 3 – 4: Gates and Hardware
Gate frames are hung and checked for swing, self-close and latch alignment. Posts that carry a gate get a deeper footing, and we test the gate a full cycle before walk-away. You decide whether you want a standard latch, a self-latching option, or a keyed entry here.
Day 4 – 5: Finish, Touch-Up and Walkthrough
Weld touch-up, hardware torque check, and a final pass for coating damage from install. We walk the whole run with you and note anything that needs a return visit. The written workmanship warranty covers this – our 730-Day Done Right Promise means if it’s not right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Iron Fence Options You’ll Choose Between
Most of the decisions that move your price come down to these five choices:
- Material type: wrought iron (traditional, heavier, best under impact, highest cost) vs. steel ornamental (lighter, more affordable, standard for most residential runs) vs. aluminum (rust-proof, lightest, least impact resistance).
- Finish: powder coat (uniform, low upkeep, standard) vs. painted finish (touches up easier, needs repaint every few years) vs. galvanized base with topcoat (best corrosion protection, adds cost).
- Height: 4 ft for decorative frontage, 5 ft for general yard, 6 ft for privacy and pool code compliance. Each step adds linear-foot cost.
- Picket spacing and style: standard pickets vs. tight spacing, and flat-top vs. spear-top finials. Tight spacing adds material; finials add cost per post.
- Gate complexity: single walk gate vs. double drive gate vs. automated swing. Drive gates need heavier frames and deeper footings.
After the iron work, homeowners often pair this with Patios, Walkways & Pool Decks in Seagoville to tie a gate into a new pool surround or side path.
What Iron Fence Costs in Seagoville, TX

Expect $3,500 – $9,000 for a typical residential iron fence in Seagoville, with most jobs landing in the middle. Here’s what pushes a job to the low or high end:
| Line Item | Typical Range |
|---|---|
| Basic 100 – 150 LF steel ornamental, single gate | $3,500 – $5,500 |
| 150 – 250 LF with two gates | $5,000 – $7,500 |
| Premium wrought iron with decorative panels | $7,000 – $9,000+ |
| Additional drive gate | $800 – $2,000 |
| Utility locate + tear-out of existing fence | $200 – $800 |
What moves the number:
- Linear feet and post count – the biggest single driver. More posts means more footings, concrete and labor.
- Existing conditions – old fence removal, concrete embedded in the ground, or a rocky or clay-heavy run all add time.
- Material grade – wrought iron costs noticeably more than steel ornamental, and aluminum runs lower.
- Gate type and hardware – a double drive gate with a self-latching or keyed mechanism adds both material and install time.
- Permit scope – a standard residential run may not require a permit, but pool barriers and frontage fences may trigger one. We confirm before quoting, not after.
Every written estimate covers labor, footings, concrete, gate hardware, and finish touch-up. Anything that would add a change order gets called out in writing first, and the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Seagoville Homes Specifically Do to This Job
Seagoville sits on the Dallas – Kaufman county line, and that line cuts through more than one fence job. We regularly work lots where the property sits on one side of the county line and the neighbor’s fence on the other, which means permit requirements, inspection scheduling and even some material specs can differ block to block. That’s before we even get to the Blackland Prairie ground – expansive clay that heaves with every drought-flood swing and flexes fence post footings in a way sandy soil never does. The older brick ranch and 1970s – 80s frame homes in the core along US 175 often have an existing fence set shallow with rusted footings, and we treat that as a full replacement rather than a re-set. Newer tract homes on the east and south edges tend to come with builder-grade fencing that’s fine for privacy but not for wind loads, and those runs are where a properly set iron fence earns its keep. If you’re also adding a structure on the property, homeowners often pair this with ADU Design & Permitting in Seagoville to coordinate site lines and inspections.
Serving Seagoville, TX – Our Local Coverage Area
We serve Seagoville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Iron Fence in Seagoville

Most residential iron fence installations in Seagoville take three to five working days, weather permitting. Footings need to cure before panels hang, which adds a day or two on larger runs. Call (888) 426-8078 for a specific timeline based on your linear footage.
It depends on which side of the Dallas – Kaufman county line your lot sits on and whether the fence serves as a pool barrier or borders a frontage. A standard backyard residential run often doesn’t require one; pool barriers and certain frontage fences usually do. We confirm the permit requirement during the estimate so you’re not blindsided at inspection. Call (888) 426-8078 to schedule your free estimate.
In most cases, yes. We locate sprinkler lines and landscape elements during the layout walk and set post holes to miss them where possible. If a post lands directly on a sprinkler head or main line, we flag it before digging so you can decide whether to relocate it or accept the hit. Call (888) 426-8078 to talk through your yard’s layout.
An iron fence in Seagoville runs $3,500 – $9,000 for a standard residential run, depending on linear feet, material grade, gate count and finish. Wrought iron and double drive gates push toward the top; steel ornamental with one walk gate lands closer to the bottom. Call (888) 426-8078 for an exact quote – estimates are free.
Our installations carry the 730-Day Done Right Promise – if any weld, footing or gate hardware fails within that period, we come back and make it right. Material warranties come from the manufacturer and vary by product. Call (888) 426-8078 for the written details on your specific job.
Get Your Free Iron Fence Estimate in Seagoville
We’ll walk your property line, take actual measurements, check which county you’re on for the permit question, and hand you a line-itemed estimate before anyone commits to a date. No phone tag, no surprises. Call (888) 426-8078 to schedule your free estimate for Fence Installation in Seagoville – or reach out to discuss how this fits into a full Fence Installation scope. We cover Seagoville and the surrounding area, and calls are answered by a live person 24/7.
Written by the team at Groundwork Construction Co.












