







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Mesquite: What It Actually Takes
Walk-In Showers & Shower Remodeling in Mesquite runs $9,000 – $28,000 for a full bath, and a curbless shower with a frameless glass surround usually lands in the $4,500 – $12,000 range on its own. Plan on two to four weeks from demo to final inspection, with the tile-and-waterproofing stage eating most of that time. Call (888) 426-8078 and we’ll walk your shower, check the pan, and put a line-item number in writing. Most of the showers we tear out in Mesquite were installed forty or fifty years ago, and the surprises are usually behind the tile.
How a Walk-In Shower Comes Together, Stage by Stage

Most contractors gloss over this part. Here’s what actually happens, in order, so you know when you’ll be deciding something.
Day 1: Demolition and what we find underneath
We pull the old tile, tub, surround, and valve trim. This is the day your two biggest unknowns surface: whether the waterproofing was ever done correctly and whether the studs behind the wall are sound. In Mesquite’s 1950s – 1970s houses, a fair number of original pans were built without a proper sloped liner, so we often find rot in the curb and bottom plate. If the framing is soft, that’s a repair line item, not a surprise later.
Days 2 – 3: Plumbing rough-in and pre-slope
We set the new drain and valve body, then build the sloped mortar bed that makes a curbless floor actually drain. If you’re moving the shower head to a rain position or adding a hand sprayer, this is the stage where that trim gets decided and where any wall relocation gets caught. Wall relocation means plumbing changes and a longer schedule. Adding a bench is a framing decision we make now, not week two.
Days 4 – 6: Waterproofing and inspection
We install a bonded waterproofing membrane over the pan and walls, then flood-test the pan for a full 24 hours before any tile goes down. In Mesquite we coordinate a mid-project rough-in inspection with the city while the walls are open. You don’t have to be home for this, but you’ll want the inspection card kept on site. This is the single most important stage, and it’s the one most homeowners never see.
Days 7 – 12: Tile, trim, and glass template
Wall tile goes up first, then the floor tile with the correct slope. Once the tile is set, we template the glass. That template order is a two-to-three-week lead time on frameless enclosures, so we get it moving early. You’ll pick grout color and any niche shelving at this point. Porcelain large-format is the popular call here because it hides the hard-water spotting North Texas water leaves behind.
Days 13 – 16: Glass, fixtures, and final walkthrough
The enclosure installs, we hang the shower head, valve trim, seat, and grab bars, and we run the final plumbing inspection. Then a full water test with you standing there. The whole crew is background-checked and in uniform, and everything here carries our 730-Day Done Right Promise: if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Shape Your Shower
- Zero-threshold vs. low curb. A true curbless floor needs either a recessed subfloor or a linear drain, and it adds real labor. It’s the right call for aging-in-place. A low two-inch curb costs less and drains just as well. Pick based on who will use it in ten years, not today.
- Frameless vs. semi-frameless glass. Frameless is the clean look and runs at the higher end of the range. Semi-frameless shaves several hundred dollars and needs less precise wall alignment. On slightly out-of-plumb walls in older Mesquite ranches, semi-frameless is sometimes the smarter buy.
- Tile material. Porcelain is the workhorse in this climate: it holds up to moisture swings and cleans easily. Natural stone looks great and costs more, and it needs sealing. Large-format slabs cut grout lines way down.
- Waterproofing system. A bonded sheet membrane and a liquid-applied system both work when installed correctly. The brand matters less than the installer doing the flood test. Ask to see it.
- Fixtures. Kohler is a brand we install often for valve and trim; a thermostatic valve adds cost but kills the temperature swings that come with a shared shower. A built-in seat and grab bars should be framed in now, not bolted on later.
What Walk-In Showers & Shower Remodeling Costs in Mesquite, TX

The range is $9,000 – $28,000 for the full bathroom scope, and $4,500 – $12,000 when you’re isolating the shower itself. Here’s what moves a job to the low end versus the high end:
- Footprint. A 4×4 shower and a 6×5 walk-in are different projects. More square footage means more tile, more membrane, more glass.
- Existing condition. Original waterproofing, rot, or out-of-level framing pushes the number up. We find this on demo day, and we tell you before we touch it.
- Plumbing and structure moves. Keeping the drain and valve where they are keeps the price down. Relocating a drain, adding a wall, or recessing the floor for a curbless pan adds labor and coordination.
- Material grade. Porcelain and semi-frameless glass sit at the low end; stone and fully frameless with a linear drain sit at the high end.
- Permit scope. A shower swap that leaves plumbing in place is one thing; a remodel that touches the valve or drain goes through the city and gets inspected. We pull the permits and pass the inspections.
Every estimate is a written line-item quote. The number you see is the number you pay, with no change orders unless you approve them. We also carry $1,000 off projects over $10,000 and 0% financing for 18 months, which spreads a $12,000 shower into a monthly figure instead of a lump sum.
See the difference
Before
After
Before
After
Before
AfterWhy Mesquite’s Housing Stock Changes This Job
Mesquite is a built-out, post-war inner-ring suburb. Nearly everything here is renovation, not new construction, and the city’s been essentially fully developed since the 1980s. That means we’re almost always working inside a 1950s-to-1970s brick-veneer ranch or tract home, and those showers are original to the house. The failure modes are consistent: cast-iron drains at the end of their life, copper lines that have been sweating for decades, and mortar beds that never had a sloped liner. The expansive black clay under Mesquite also swells and shrinks with the wet-dry cycles, and that movement shows up as cracks in the shower floor tile and a pan that has pulled away from the wall at the bottom. When we open a shower in a home off the I-30 corridor or a neighborhood near Mesquite High, we budget for that. If you’re also planning to upgrade your curb appeal, many Mesquite homeowners pair this with Roof Replacement & Installation in Mesquite or Metal Roofing in Mesquite while the crew is out.
Serving Mesquite, TX – Our Local Coverage Area
We serve Mesquite and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions

Two to four weeks from demo to final inspection. The tile and waterproofing stages run the longest, and a frameless glass order adds a two-to-three-week lead time if you want it templated after tile. Call (888) 426-8078 and we’ll give you a realistic schedule for your house.
If the work touches the plumbing valve, drain, or any structural framing, yes, and the city will inspect it. A straight cosmetic tile swap over intact waterproofing usually doesn’t require one. We pull and manage the permit and hold the inspection card for you. Call (888) 426-8078 to find out which applies to your job.
Yes, and most Mesquite jobs do. The drain and valve stay put, the curb comes out, the pan gets rebuilt with proper slope, and you get a curbless or low-curb floor without moving a pipe. Keeping the plumbing in place is the single biggest cost saver. Call (888) 426-8078 for a free estimate on that scope.
The shower itself runs $4,500 – $12,000, and the full bathroom often lands $9,000 – $28,000 depending on size, condition, and material grade. Frameless glass and stone push the high end; porcelain and semi-frameless sit lower. Call (888) 426-8078 for an exact quote, and estimates are free.
The entire installation carries our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If the pan leaks or a tile lets go, we make it right, not just “look at it.” Call (888) 426-8078 with questions before you sign anything, ours or anyone else’s.
Get a Free Estimate for Walk-In Showers & Shower Remodeling in Mesquite
Call (888) 426-8078 for a free on-site estimate. We’ll measure the shower, inspect the pan and valve, and hand you a written line-item quote the same visit. A live person answers around the clock, so you’re not stuck leaving a voicemail. For the wider scope, see our Bathroom Remodeling in Mesquite page, or the Bathroom Remodeling hub. We cover all of Mesquite and surrounding areas.
Written by the team at Groundwork Construction Co. of Mesquite.












