







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Seagoville, TX: What the Job Actually Costs and How Long It Takes
Walk-In Showers & Shower Remodeling in Seagoville typically runs $9,000 – $28,000 for a full bathroom scope, while the shower itself lands between $4,500 – $12,000 depending on size, waterproofing method, and glass. Most jobs take 2 – 3 weeks from demolition to final walkthrough, with the tile-and-cure stretch eating the longest stretch of that calendar. Call (888) 426-8078 and we’ll put a written, line-item number in front of you before anything gets ordered.
Our Process, Start to Finish: What Happens Each Day of a Seagoville Shower Build

Shower work is sequencing, not magic. The order we follow is the order that keeps water where it belongs for the next twenty years.
Stage 1: Measure, Decide, Permit (Days 1 – 5)
We start with an on-site measure and a layout conversation. This is where you pick the footprint (standard 36×48, a 48×60, or a curbless 60-inch run), the drain position, and whether the valve moves. If the valve or drain relocates, we’re opening the wall and slab, and that changes the permit scope. We pull the plumbing permit through the city before a single tile comes off the wall. In Seagoville, that review is usually a few business days – longer when the lot sits on the Kaufman County side of the line.
Stage 2: Demo and Rough-In (Days 6 – 8)
Old tile, backer, tub, and valve come out. We inspect what’s behind the wall: rotten framing, a decades-old two-handle valve, cast iron drain lines, or a pan that was never sloped. Rough-in plumbing and any electrical for a light or fan gets set now, and the rough inspection happens before anything closes up. You approve the rough-in photos before we seal it – no guessing later about what’s behind the tile.
Stage 3: Waterproofing (Days 9 – 10)
This is the stage cheap jobs skip. We build a sloped pan, then apply a bonded waterproofing membrane (Schluter-KERDI or a liquid-applied system) over cement backer on the walls. A flood test runs 24 hours. You decide here between a prefab acrylic pan or a tiled mortar pan – a choice you’ll feel in your feet every morning.
Stage 4: Tile, Glass, and Fixtures (Days 11 – 16)
Large-format porcelain goes up faster than penny tile; natural stone takes longer to seal. Grout cures, then the glass enclosure gets templated and installed. Kohler or Delta fixtures go in at the end so they don’t get thrashed during tile work. This is where a Seagoville shower job either looks $9,000 or $28,000 – it’s mostly the tile selection and glass detail.
Stage 5: Final Inspection and Walkthrough (Days 17 – 21)
The city signs off on plumbing and electrical. We do a 30-minute walkthrough: water test, drain flow, caulk lines, glass alignment. You get the 730-Day Done Right Promise in writing – if a seam or a slope fails, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Real Choices: Materials, Glass, and Pans for a Seagoville Shower
Every shower is a stack of four decisions. Here’s what each one costs you in money and in maintenance.
- Pan and waterproofing. A prefab acrylic pan runs $400 – $900 installed and is easy to clean but looks builder-grade. A tiled mortar pan with a bonded membrane runs $1,200 – $3,000 and looks custom – it also demands a genuinely skilled installer, because a bad slope means a puddle forever. We use Schluter systems on the tiled option, and the flood test is non-negotiable.
- Wall tile. Large-format porcelain (12×24) runs $6 – $15 per square foot and is the smart choice for a working shower – fewer grout lines, easier to keep clean. Penny or hex tile runs $10 – $25 per square foot and looks great but is grout-heavy. Natural stone (marble, travertine) runs $20 – $45 per square foot and needs annual sealing in North Texas humidity swings.
- Glass. A framed sliding door is $600 – $1,200. A frameless 3/8-inch tempered enclosure is $1,800 – $4,500 – the difference is real, both in how it opens and how the shower photographs. Frameless needs precise wall studs; a bowed wall blows the budget.
- Fixtures. A basic Delta or Moen valve-and-trim set runs $200 – $450. A Kohler thermostatic system with a rain head and hand shower runs $800 – $2,000. The valve is what you’ll replace in ten years; buy the good one now.
For a curbless, barrier-free shower, add $1,500 – $3,500 for the floor engineering – the subfloor has to drop or the surrounding floor has to rise. Worth it if anyone in the house uses a walker or wheelchair, or if you simply want the clean look.
What Walk-In Showers & Shower Remodeling Costs in Seagoville, TX

The full-bathroom range in Seagoville is $9,000 – $28,000; the shower alone is $4,500 – $12,000; a straightforward shower replacement without moving anything is $3,000 – $8,500. Those are the honest brackets, and they hold because we write line-item estimates, not lump sums.
| Line item | Typical range |
|---|---|
| Walk-in shower installation (new footprint) | $4,500 – $12,000 |
| Shower replacement (same footprint, no plumbing move) | $3,000 – $8,500 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Bathroom vanity installation | $800 – $3,000 |
| Full bathroom remodel (shower + vanity + floor + fan) | $9,000 – $28,000 |
Five things move you toward the high end: size (a 60-inch shower is cheaper per square foot than a 36-inch because the fixed costs spread further); existing condition (rot behind the wall, a failed old pan, or a cast iron drain turns a $5,000 job into a $9,000 one); relocating the valve, drain, or lighting, which triggers a plumbing permit and slab or framing work; material grade, mostly tile and glass; and permit scope, since a full remodel with electrical changes pulls more inspections than a simple shower swap.
What’s included in our written estimate: demolition, haul-off, rough plumbing and electrical, waterproofing, tile, grout, glass, fixtures you selected, permit fees, and final inspection. What isn’t: structural repairs found mid-demo (we show you photos and quote before proceeding), and anything you decide to add after sign-off. That’s the No-hassle upfront pricing policy – the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Seagoville Homes Specifically Do to a Shower Job
Seagoville sits on the Dallas – Kaufman county line, where the Blackland Prairie’s expansive clay meets the fast-growing exurban fringe. That soil moves, and it moves the slab with it. In the older brick ranch houses along the US 175 core, we regularly find out-of-square walls and a shower pan that cracked because the slab flexed underneath. That’s a foundation-and-framing conversation before it’s a tile conversation, and we quote it that way.
The same county line matters for permits. A lot on the Dallas County side may be inspected on a slightly different schedule than the Kaufman County side a block away, and material specs occasionally differ. We check the jurisdiction before we file – not after. The newer tract subdivisions on the east and south edges typically have HOA exterior-visibility rules and builder-grade shower valves from the 2000s that are already failing. And the North Texas heat, drought-flood swings, and spring storms mean we schedule tile-and-cure work around the summer heat and the storm season – tile doesn’t like being set at 105 degrees, and we don’t fight it.
We cover the whole of Seagoville and the surrounding corridor, and this is often part of a larger scope – the wider project lives on our Bathroom Remodeling in Seagoville page, and the trade itself lives on our Bathroom Remodeling hub. Homeowners working on the exterior at the same time often pair this with Roof Replacement & Installation in Seagoville, and a few go a step further with Metal Roofing in Seagoville for hail longevity.
Serving Seagoville, TX – Our Local Coverage Area
We serve Seagoville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Walk-In Showers & Shower Remodeling in Seagoville

Plan on 2 – 3 weeks from demo to final walkthrough, with a simple shower replacement on the same footprint finishing in 7 – 10 days. Call (888) 426-8078 for a schedule based on your specific bathroom.
Yes, if the plumbing or electrical changes, and we pull it – a shower replacement with the valve and drain in the same place usually doesn’t need a permit. We check the Dallas-versus-Kaufman jurisdiction before filing, so you’re not caught mid-project. Ask us on the call, (888) 426-8078.
In most cases, yes, and that’s how you keep the shower near $4,500 – $8,500 instead of $12,000. As long as the new shower covers the existing valve and drain location – which most 48×60 or 60-inch footprints do – we don’t have to open the slab. We confirm on measure day.
The shower itself runs $4,500 – $12,000, and a full bathroom remodel with a new shower, vanity, and floor runs $9,000 – $28,000. Call (888) 426-8078 for an exact quote – estimates are free and written line-item.
Every shower we install is covered by the 730-Day Done Right Promise – if a slope, seam, or waterproofing fails, we come back and make it right. That’s the longest workmanship guarantee we offer, and it applies to the waterproofing, not just the tile.
Get a Free Walk-In Shower Estimate in Seagoville
Walk-In Showers & Shower Remodeling in Seagoville starts with a free on-site estimate: we measure the bathroom, look behind the wall, and hand you a written line-item number with the permit, material, and glass costs all broken out. No pressure, no lump sum, no surprises. Call (888) 426-8078 – a live person answers around the clock, and our background-checked, uniformed technicians arrive on time. The 730-Day Done Right Promise goes on every job.
Written by the team at Groundwork Construction Co.












