







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Sunnyvale, TX: What to Expect
Walk-In Showers & Shower Remodeling in Sunnyvale, TX typically runs $9,000 – $28,000 depending on whether you’re replacing a tired shower in place or reworking the whole wet zone, and most jobs take two to four weeks from demo to final inspection. A straight walk-in shower installation alone lands at $4,500 – $12,000; the higher end of the full range reflects curbless entries, frameless glass, and relocated plumbing. Call (888) 426-8078 for a free on-site estimate with line-item pricing.
Here’s the short version before the detail: you’re choosing a layout, a waterproofing system, a tile or slab surface, and a glass configuration, and each of those has a cost and a lifespan you should understand before signing anything.
How Groundwork Runs a Shower Project, Stage by Stage

A shower remodel is mostly a waterproofing job that happens to have pretty tile on top. That’s why we sequence it tightly and don’t let anyone rush the membrane stage.
Stage 1: Measure and design (one visit, about 90 minutes)
We measure the existing pan, check the drain location, and open the wall enough to see what the supply lines and studs look like. You’ll decide rough layout and glass style at this visit. If the current shower is a tub surround, we confirm what’s behind it – sometimes there’s rot, sometimes there isn’t.
Stage 2: Demo and framing (days 1 – 2)
Out comes the old pan, tile, backer, and any failing greenboard. We inspect for hidden water damage at the valve wall and the curb, which is where it usually hides. Any framing repairs get priced before we proceed, not discovered mid-job.
Stage 3: Rough-in and waterproofing (days 3 – 5)
Plumbing gets moved to its final position – shower valve, drain, and any body sprays. Then the important part: a bonded waterproofing membrane or a troweled liquid system, applied and cured before a single tile goes up. This is the stage we refuse to compress. A shower that leaks will fail no matter how good the grout looks.
Stage 4: Tile and glass (days 6 – 12)
Wall tile, then the floor with a proper slope to the drain, then grout and cure time. Glass gets templated after tile is set – usually a second visit – because frameless panels are cut to the finished opening, not to the rough framing.
Stage 5: Final walkthrough and inspection (day 12 – 20 depending on scope)
We flood-test the pan, verify the valve, clean up, and hand you the warranty paperwork along with the 730-Day Done Right Promise. If a permit was pulled, we schedule the inspection and stay on it until it passes.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Shape Your Shower
Most of the decisions that matter happen in the first week. Here’s what you’re really picking between.
- Curbless vs. curbed entry: Curbless looks cleaner and is easier to age into, but it requires the floor framing to accommodate a recessed pan or a linear drain. It adds cost and sometimes structure work.
- Tile vs. large-format slab: Porcelain tile is forgiving, repairable, and lets you match nearby finishes. Slab gives a seamless look with fewer grout lines but costs more and offers less flexibility if something shifts.
- Glass: frameless vs. semi-frameless: Frameless is the premium look and easier to clean, but it’s custom-templated and costs more. Semi-frameless is more forgiving on an out-of-square opening.
- Waterproofing system: A bonded sheet membrane or liquid-applied system is the standard we hold to. We won’t install over cement board alone, even though some bids will.
- Fixtures and valve: Kohler and similar brands in the mid-to-premium tier last longer and are worth the small premium – a failing cartridge in year three is a bigger headache than the price difference.
- Niches, benches, and grab bars: These need to be planned into the framing. Adding them later means opening the wall again.
What Walk-In Showers & Shower Remodeling Costs in Sunnyvale, TX

Walk-In Showers & Shower Remodeling in Sunnyvale runs $9,000 – $28,000 for a full scope, with a standalone walk-in shower installation at $4,500 – $12,000, a shower replacement at $3,000 – $8,500, and a tub-to-shower conversion at $3,500 – $10,000. Here’s what pushes a job toward one end of that range:
- Size: A 36″ x 48″ shower is the baseline. Going to a large walk-in or double-head layout adds glass, tile, and labor.
- Existing condition: Rotten framing, failed pans, or mold behind the wall add days and materials.
- Relocating plumbing, electrical, or structure: Moving a drain or valve adds cost and often a permit scope. Recessed floors for a curbless entry are the biggest wildcard.
- Material grade: Builder-grade porcelain vs. large-format slab and frameless glass is the single largest swing in the finish budget.
- Permit scope: A like-for-like swap is simpler than a layout change that requires a plumbing permit and inspection.
Your written estimate will show line items for demo, framing repair allowance, waterproofing, tile, glass, fixtures, and permit. What it won’t include unless we flag it: hidden rot found after demo, and structural changes we can’t see until the wall is open. We price those before proceeding – no change orders you didn’t approve.
See the difference
Before
After
Before
After
Before
AfterWhat Sunnyvale Homes Do to a Shower Project
Sunnyvale is a small, affluent town on the eastern edge of Dallas County, ZIP 75182, and the building stock reflects it – large-lot custom and semi-custom homes rather than tract infill. That changes this job in specific ways. Custom homes here often have oversized primary baths with unusual shower dimensions, and glass has to be templated to a non-standard opening, which adds a visit and cost. We also see more acreage properties where the shower shares a wall with an exterior, and North Texas’ hot, humid summers combined with expansive clay soils mean foundation movement can throw a shower pan out of level over time – a curbless entry needs to be checked against the actual floor, not the drawing.
Permitting here runs through the town’s own office, and the relationship and rhythm of a small municipal jurisdiction means inspection scheduling is tighter and less forgiving than in a big city. We pull permits when the scope calls for it and see them through. If your bathroom work is part of a full project, this pairs naturally with Bathroom Remodeling in Sunnyvale, and we cover the surrounding area through our Sunnyvale service page. Homeowners often pair exterior upgrades with interior work too – Roof Replacement & Installation in Sunnyvale and Metal Roofing in Sunnyvale are common companion jobs on these properties. If your shower is part of a bigger scope, start with our Bathroom Remodeling service.
Serving Sunnyvale, TX – Our Local Coverage Area
We serve Sunnyvale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Walk-In Showers & Shower Remodeling in Sunnyvale

Most jobs take two to four weeks from demo to final inspection, with waterproofing cure time and glass templating as the two stages that set the floor. A simple replacement can finish faster; a curbless layout with relocated plumbing runs longer. Call (888) 426-8078 and we’ll give you a realistic schedule for your actual scope.
Yes, if you’re moving the drain, valve, or any plumbing, and generally for a layout change; a like-for-like surface swap often doesn’t require one. We confirm the scope against the town’s requirements before we start. Call (888) 426-8078 to talk through your job.
Yes – replacing tile, pan, and glass in the existing footprint is the most common version of this job and lands at the lower end of the range. It’s a good fit when the valve and drain are sound and the framing is intact. Call (888) 426-8078 for a free estimate.
$9,000 – $28,000 for a full remodel, $4,500 – $12,000 for a standalone walk-in shower, and $3,500 – $10,000 for a tub-to-shower conversion. The variables are size, existing condition, whether plumbing moves, and finish grade. Call (888) 426-8078 for an exact quote – estimates are free.
Every project is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s backed in writing, along with the manufacturer warranties on fixtures and glass. Call (888) 426-8078 with questions before you commit.
Ready to Price Your Sunnyvale Shower?
Call (888) 426-8078 to schedule a free on-site estimate for Walk-In Showers & Shower Remodeling in Sunnyvale. A live person answers around the clock, so you won’t hit voicemail. We’ll measure the space, walk you through waterproofing and glass options, and leave you with line-item pricing and a written scope – no surprises, no pressure. Background-checked, uniformed technicians do the work, and 0% financing for 18 months is available.
Written by the team at Groundwork Construction Co.












