







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in Sunnyvale, TX: What It Costs and How Long It Takes
An iron fence in Sunnyvale, TX usually runs $3,500 – $9,000 for a typical residential run, and most jobs are built in 3 – 5 working days once materials land. That covers layout, posts set in concrete, welded or assembled panels, and a finish coat. The number climbs with gates, slope, and length. Call us at (888) 426-8078 for a free on-site estimate with a written line-item quote.
How We Build an Iron Fence on a Sunnyvale Acreage Property

On a large-lot property, the hardest part of an iron fence is rarely the fence itself. It’s the run. Long property lines, grade changes, and gates that need to swing clear of a shop or barn door. Here’s the order we work in.
Stage 1: Walk the line and set the layout (day 1, 1 – 2 hours)
We walk the property line with you and confirm corners, gate positions, and where the fence meets an existing structure. On acreage off the rural edges of Sunnyvale, this is also where we check for buried power or water running out to a shop or outbuilding. You decide the gate swings and the post spacing here.
Stage 2: Call for utility locates and confirm setbacks (day 1 – 2)
We get the line located before anyone digs. If the fence clips a setback or easement, we adjust the layout now rather than after posts are set. You’ll see the revised line marked before we cut ground.
Stage 3: Set posts and pour footings (day 1 – 2 of build)
Posts go in concrete, set to depth and plumb, with spacing matched to the panel width. On sloped ground we step the fence in sections rather than floating panels off the grade. Oversized gates get heavier posts and deeper footings because a wide gate on a long run is where iron fences fail first.
Stage 4: Hang panels and gates (day 3 – 4)
Panels are welded or assembled and set into the posts. Gates get hinges, a latch, and a stop. You walk the line with us and check every gate swing before we finish.
Stage 5: Finish coat and final walkthrough (day 4 – 5)
We touch up any welds and apply the finish coat. Then we do a final walk for finish, alignment, and hardware. The whole job is covered by our 730-Day Done Right Promise, in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for an Iron Fence
Iron fence is a family of products, not one product. The spec you pick drives both the price and how the fence holds up to North Texas weather.
- Wrought iron (traditional): Heavier, hand-welded, the classic pick for a custom home’s front line. Costs more and takes longer, but it’s the most durable over a long horizon.
- Steel or ornamental metal: Usually lighter and less expensive than true wrought iron, with similar looks. Ask what the gauge is; thinner steel flexes on long unsupported runs.
- Powder-coated finish vs. painted: Powder coating holds up better to sun and humidity and wears longer between recoats. Paint is cheaper up front and needs touch-ups sooner.
- Panel style: Pickets, flat-top, arched, or a decorative top rail. Arched panels and decorative finials add cost per section.
- Gate type: A walk gate, a double drive gate, or both. Heavy drive gates need bigger posts and hardware, and that’s the single biggest line item after the run itself.
If the iron fence is part of a full Fence Installation in Sunnyvale plan, we spec the whole perimeter together so the iron line and the rest of the fencing share posts and gates cleanly.
What Iron Fence Costs in Sunnyvale, TX

Most residential iron fence jobs in Sunnyvale land between $3,500 and $9,000. A short front run with a single walk gate sits at the low end; a long perimeter with a double drive gate, slope, and a premium finish pushes to the top. Here’s what moves the number.
| Line item | Typical range |
|---|---|
| Iron fence, standard run | $3,500 – $7,000 |
| Long or sloped perimeter run | $6,000 – $9,000 |
| Walk gate | $400 – $1,200 |
| Double drive gate with heavy posts | $1,200 – $3,500 |
| Powder-coat finish upgrade | Included or modest adder |
Four variables drive the price up or down. Run length and gate count matter most. Grade matters next: a flat lot prices easier than a rolling one. Finish grade matters too, since powder coat outlasts paint. And footing depth changes on expansive clay, which is common here. Your written estimate lists each line, and the number you see is the number you pay. Homeowners often pair this with Patios, Walkways & Pool Decks in Sunnyvale so the gate and the hardscape line up.
See the difference
Before
After
Before
After
Before
AfterWhat Sunnyvale Properties Do to This Job
Sunnyvale is a small, affluent town in ZIP 75182 on the eastern edge of Dallas County, and the building stock is mostly large-lot custom and semi-custom homes plus acreage. That profile changes an iron fence job in ways a denser city like Mesquite or Garland doesn’t. The runs are longer, the gates are bigger, and the work is gated by the town’s own permitting and inspection rhythm rather than a big-city department’s. Relationships with Sunnyvale’s municipal permitting office matter here.
The soil is the other factor. Expansive clay is common across the region, and on acreage it shows up as footing movement after a wet spring. We set posts deeper and pour footings sized to the gate load, because a wide drive gate on a long run is what shifts first. If you’re also building or adding an outbuilding, our ADU Design & Permitting in Sunnyvale work follows the same permitting path. You can see the towns we cover on our Sunnyvale service-area page.
Serving Sunnyvale, TX – Our Local Coverage Area
We serve Sunnyvale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Iron Fence in Sunnyvale

Most residential iron fence jobs take 3 – 5 working days once materials arrive, with longer acreage runs taking a few days more. The first day is layout and footings; panels and gates go up on days 3 and 4, then we finish and walk it with you. Call (888) 426-8078 for a schedule on your property.
It depends on height, location, and whether the fence sits in an easement. We check the town’s requirements before we dig and pull what’s needed. Call (888) 426-8078 and we’ll tell you what your job requires.
Most jobs land between $3,500 and $9,000, with gates and slope driving the high end. A short front run with one walk gate prices at the low end; a long perimeter with a double drive gate prices higher. Call (888) 426-8078 for an exact quote, free.
No. Our written estimate is fixed, with no change orders for the scope we quoted. If something buried or hidden turns up, we stop and talk to you before doing anything. Call (888) 426-8078 and we’ll walk you through how we price.
Every iron fence we build is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. Call (888) 426-8078 to schedule your free estimate.
Get a Free Iron Fence Estimate in Sunnyvale
Call (888) 426-8078 to schedule a free on-site estimate for an iron fence on your Sunnyvale property. A live person answers around the clock. We’ll walk the line, check for buried lines and setbacks, and hand you a written line-item quote with a fixed price and the 730-Day Done Right Promise. For the wider project, see our Fence Installation service.
Written by the team at Groundwork Construction Co.












