







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Seagoville, TX: What It Costs and How Long It Takes
New cabinets and countertops in Seagoville run $14,000 to $45,000 for a full kitchen’s worth of both, and most jobs take three to five weeks from demo to the last outlet cover. If your old cabinets are pulling away from the wall or your tile counter is cracking at the seams, that’s the job. Call (888) 426-8078 and we’ll walk you through what your kitchen actually needs before you spend a dollar.
Repair It, Refit It, or Replace It: How We Run a Cabinet and Counter Job

Replacing boxes and tops is not a weekend swap. Here’s the real sequence, with what we’re doing and what you’re deciding at each stage.
Stage 1 – Measure and plan (2 to 5 days). We template the room, check walls for plumb and floors for level, and confirm what stays and what goes. This is where you pick door style, finish, and countertop material. On Seagoville‘s older slab-on-grade houses we also check for any obvious floor deflection before we commit to a layout, because that changes cabinet sizing and shim strategy.
Stage 2 – Demolition and rough-in (1 to 2 days). We pull the old cabinets and tops, haul them away, and expose the walls. If we’re adding a dishwasher, relocating a sink, or moving an outlet, this is when that happens. Plumbing and electrical get roughed in and, when the scope requires it, inspected before anything closes back up. You decide now, not later, whether the new layout moves any of those services – moving them after cabinets are set means tearing out finished work.
Stage 3 – Cabinet install (2 to 4 days). Base boxes first, then uppers, leveled and shimmed and anchored to studs. Crown and light rail go on. This is the stage that looks dramatic in photos and is mostly careful carpentry in real life.
Stage 4 – Templating and countertop fabrication (5 to 10 days, overlapping). Stone tops get templated only after the cabinets are set – the template is cut against the actual installed boxes, not the plan. Quartz and granite then run through a fabricator. This is the longest chunk of calendar time in most Seagoville jobs, and it’s not something we can compress without rushing the fabricator.
Stage 5 – Set, seal, and finish (1 to 2 days). Tops get set, seams bonded and polished, sink and faucet hooked up, and the counter sealed where the material calls for it. We do a final walkthrough with you and hand over care instructions for the stone or the finish. If anything’s off, it’s covered under the 730-Day Done Right Promise – if it’s not done right, we make it right.
Live person answers the phone, 24/7, so scheduling questions don’t sit until Monday. Pricing is upfront – the number you see is the number you pay.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
- Stock, semi-custom, or full custom cabinets. Stock gives you fast delivery and standard sizes at the low end. Semi-custom adds sizes and door styles with a modest step up. Full custom is exactly what it sounds like – any dimension, any detail – and lands at the top of the range. KraftMaid sits in the semi-custom sweet spot we spec most often; it’s a name we trust to hold up under North Texas humidity swings.
- Quartz vs. granite vs. laminate. Quartz is uniform and non-porous, so it doesn’t need sealing and shrugs off tomato sauce and citrus. Granite is natural, unpredictable, and wants periodic sealing. Laminate is the honest budget choice and has gotten dramatically better – it’s fine for a rental or a hard-used secondary kitchen. Cambria quartz is our go-to for the main kitchen, and the trade-off is simple: you get durability and consistency, you pay for it.
- Slab thickness and edge profile. A standard 2cm or 3cm slab is the norm; the edge profile (eased, bullnose, ogee) is a small line item that changes the look a lot. Heavier profiles on a small kitchen can read as bulky – ask before committing.
- Drawer and door hardware. Soft-close hinges and full-extension drawers are standard on the good stuff now. Under-mounted drawer slides vs. side-mounted is a durability conversation, not just a price one.
- Over-cabinet and under-cabinet lighting. Small dollar, big visual payoff, and much easier to wire during demo than after. Worth deciding in Stage 1.
What Cabinets & Countertops Costs in Seagoville, TX

A full cabinet and countertop job in Seagoville lands between $14,000 and $45,000. Broken down, Kitchen Remodeling in Seagoville work of this type typically splits into cabinet installation at $4,000 to $13,000 and countertop installation at $2,000 to $6,500, with the rest of the range driven by layout changes, appliance coordination, and finish grade.
Here’s what pushes a Seagoville job toward the high end rather than the middle:
- Size and cabinet run. More linear feet of cabinetry and more drawer banks equal more boxes and more doors. An L-shaped 10-by-10 kitchen is a different animal from an open galley with an island.
- Existing condition. Old plaster or uneven furring strips behind the old boxes cost time to correct. In the older Seagoville core, we plan on shimming and patching before install.
- Relocating plumbing or electrical. Moving a sink or adding a dedicated circuit means opening walls and adding a permit and inspection to the schedule. If the layout stays, the number drops.
- Material grade. Stock vs. semi-custom, laminate vs. quartz, and edge profile all compound. Give us a target number and we’ll build a spec that meets it instead of overshooting.
- Permit and inspection scope. Cosmetic swaps need much less paperwork than a layout change. We pull the permits the work requires – you don’t have to chase that down.
A written estimate spells out cabinet brand and door style, countertop material and square footage, tear-out and haul-away, and finish work. It typically does not include appliances, plumbing fixture upgrades, or lighting you add after the fact. 0% financing for 18 months and $1,000 off projects over $10,000 are available – ask for both on your quote.
See the difference
Before
After
Before
After
Before
AfterWhat Seagoville Homes Do to a Cabinet and Counter Job
Seagoville’s housing mix matters here more than in most towns. The older brick ranch houses and 1970s-80s frame homes along US 175 are the ones we see most for this work, and they bring specific headaches: floors that have moved, walls out of plumb, and original cabinets that have been repainted twice and are ready to go. Newer tract subdivisions on the east and south edges have the opposite problem – builder-grade cabinets that are structurally fine but read as generic, usually replaced by homeowners who want custom-grade doors and quartz tops.
The county line is the real local wrinkle. Seagoville straddles Dallas and Kaufman counties, so a project block to block can hit different permit offices and different inspection timing. We plan for that on the front end. And because Blackland Prairie clay moves under the slab here, we check floor flatness before cabinets get ordered – an out-of-level floor will show up in cabinet doors that won’t close tight. It’s part of the free estimate.
We cover all of Seagoville, and we’re often there as part of a kitchen remodeling project or alongside Walk-In Showers & Shower Remodeling in Seagoville for homeowners doing two rooms at once.
Serving Seagoville, TX – Our Local Coverage Area
We serve Seagoville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Seagoville

Most Seagoville jobs run three to five weeks from demo to final walkthrough, with the countertop fabrication window being the longest stretch. Smaller swaps without layout changes finish closer to two weeks.
Yes, and keeping the layout is the single biggest way to control cost. Same footprint usually means no plumbing move, no new electrical circuits, and less permit scope. We can spec new doors and tops around the existing plumbing locations.
Cosmetic replacement usually doesn’t need one; layout changes that move plumbing, gas, or electrical usually do. Because Seagoville straddles the Dallas and Kaufman county line, the answer can differ lot to lot – we confirm the right jurisdiction before work starts and pull the permits the job requires.
A focused job without full-room scope typically lands in the lower half of the $14,000 to $45,000 range. Call (888) 426-8078 for an exact quote – estimates and design consults are free.
Workmanship is covered by the 730-Day Done Right Promise on every project, one of the longest guarantees in residential construction. If it’s not done right, we make it right.
Get a Free Estimate on Cabinets & Countertops in Seagoville
Tell us what you’re picturing and we’ll come out for a free on-site estimate – we measure the room, talk through material and door style, and hand you a written line-item quote with no surprises. Calls are answered by a live person around the clock. Call (888) 426-8078 to get scheduled. Background-checked technicians arrive in uniform, and most jobs are quoted within a day of the visit.
Written by the team at Groundwork Construction Co.












