







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Wylie, TX: What the Job Actually Involves
Custom and geometric windows in Wylie usually run $6,500 – $22,000 for a whole-house package, or $1,200 – $4,800 per shaped unit, and most installs take two to four working days once the glass arrives. Shaped and angled units cost above standard rectangles because every opening is templated, engineered, and often re-framed before the sash ever shows up. Lead times run six to twelve weeks for custom fabrication. Call (888) 426-8078 to schedule a free on-site estimate.
How the process runs, stage by stage

Arch-shaped, trapezoid, round, and angled bay windows don’t install like stock rectangles. Here’s the real sequence we follow on a Wylie home.
Day 1: Measure, template, and engineering
We measure every opening and template the non-rectangular units against the actual rough opening, not the drawing. On brick-veneer homes, that means noting the masonry course lines and any lintel above each opening. This is where you decide frame material, glass package, and whether each unit is fixed or operable. Takes two to four hours for a whole house.
Weeks 2 – 10: Fabrication and permit
Custom shaped units are built to order. Local permitting depends on scope: like-for-like replacement often needs no window permit in Wylie, but enlarging an opening or changing structural framing does. We handle that filing and the inspection. You’ll approve the shop drawing and confirm the grid pattern and finish before the order releases.
Install day: Prep, set, seal
We protect floors and furniture, remove the old unit, inspect the rough opening for rot or frame damage, then set the new window plumb and square. Geometric units need shimming and flashing carefully because the angled head and sill collect water differently than a flat-top rectangle. Most single openings take two to four hours.
Finishing: Trim, caulk, paint touch-up
Interior trim is fitted and caulked; exterior is flashed, sealed, and matched to the existing brick or siding. You choose the casing profile at this stage. Allow a half-day for a typical multi-window job.
Final walkthrough and inspection
We open and close every operable unit, check the seals, and walk the flashing with you. If a permit was pulled, the inspection is scheduled here. This is also when the 730-Day Done Right Promise gets explained in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The window options you’ll choose between
For custom and geometric windows, the trade-offs are real. Here’s what actually separates one bid from another.
- Frame material. Vinyl is the value pick, holds up well in North Texas heat, and suits most subdivision homes. Aluminum is slimmer and stronger for large geometric spans but conducts heat. Wood-clad gives the best look for shaped units in older ranch homes and costs the most to maintain. Fiberglass sits in the middle on price and stability.
- Glass package. Dual-pane Low-E with argon is the baseline and handles Wylie summers. Upgrade to laminated or impact-rated glass if hail protection matters to you; it adds cost but reduces the chance of a shattered bay after a storm.
- Operable vs. fixed. Fixed geometric units are cheaper and often the only option for odd shapes. Operable trapezoids and arches cost more but give ventilation. Most homeowners mix the two.
- Grid and finish. Simulated divided lites, true divided lites, and color-matched exterior finishes all add cost. Grilles matched to the existing window pattern keep the house looking consistent.
- Brands. We work with ES Windows and ECO Window Systems for custom shapes, and Therma-Tru where the job ties into a matching entry door system.
What Custom & Geometric Windows cost in Wylie, TX

Plan on $1,200 – $4,800 per shaped or oversized unit installed, and $6,500 – $22,000 for a full custom package across a home. A single specialty arch or trapezoid on a stairwell or gable runs toward the low end; a whole-house set of angles and bays with structural re-framing pushes the top.
Five things move the number:
- Size and shape. A 4-foot arch is one thing; a 10-foot half-round is another. Curved and true-radius units cost more than angled flats.
- Existing opening condition. Rot, moisture damage, or out-of-square framing adds labor before the new unit goes in.
- Structural changes. Enlarging an opening, adding a header, or cutting into brick adds framing and engineering cost.
- Glass and frame grade. Impact glass, fiberglass frames, and true divided lites all add to the per-unit price.
- Permit scope. Like-for-like swaps skip the permit; structural changes don’t.
Our written estimate lists each unit, glass, finish, labor, and permit line. What it excludes is any rotted sheathing found once the wall is open, painting beyond touch-up, and interior blinds. Those get priced in writing before we proceed, never as a surprise change order. For the whole-house picture, see our Windows & Doors in Wylie page.
See the difference
Before
After
Before
After
Before
AfterWhat Wylie homes specifically do to this job
Wylie’s housing stock shapes custom window work here in ways it doesn’t out west. Most of the homes we work on are 2000s-to-present brick-veneer two-story subdivision builds on former blackland prairie pasture, and the expansive clay under them means settling is a live concern. When a two-story Santa Anna-style gable window or a shaped clerestory in a newer Wylie subdivision starts binding or leaking, it’s often frame shift from settling, not the window itself. That’s why we check the rough opening for out-of-square before ordering anything. The older mid-century ranch homes near downtown Wylie along FM 544 and Highway 78 are a different job: wood-framed openings, some original single-pane units, and more opportunity for shaped replacements in a period-appropriate style. On either side, we look at the flashing and grading because Wylie sits in the hail belt; a poorly flashed geometric head is where leaks start after the first big storm. We cover Wylie and the surrounding towns; see our Wylie service area page for the full map.
Serving Wylie, TX – Our Local Coverage Area
We serve Wylie and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Custom & Geometric Windows in Wylie

Installation is two to four working days for a typical home. The longer wait is fabrication: custom shaped units run six to twelve weeks from order. The measuring and estimating stage is a few days, so plan on a total timeline of roughly two to three months from signed estimate to final walkthrough. Call (888) 426-8078 to get the estimate scheduled and the lead time confirmed for your shapes.
Like-for-like replacement usually doesn’t require a window permit; enlarging an opening, adding a bay, or changing structural framing does. We handle the filing and the inspection when one is required. The estimate states clearly whether your job needs a permit, so there’s no guesswork. Call (888) 426-8078 to talk through your specific scope.
Yes, in most cases. A shaped or angled window set into an existing opening is a direct swap and doesn’t touch plumbing or framing beyond the window. The exception is enlarging an opening or adding a new one, which means cutting into the wall and possibly adding a header. We flag that at estimate time so you know before work starts.
Expect $1,200 – $4,800 per shaped unit installed, or $6,500 – $22,000 for a whole-house custom package. Impact glass, fiberglass frames, and structural changes push toward the top. Every bid comes as a written line-item estimate with no change orders once we start. Call (888) 426-8078 for an exact quote, estimates are free.
Our workmanship is backed by the 730-Day Done Right Promise, one of the longest in residential construction: if it’s not done right, we make it right. Manufacturer warranties on the units and glass stack on top, and we walk you through both at the final check. If you’re pairing the windows with new hardscape out front, homeowners often pair this with Concrete Driveways & Concrete Work in Wylie or Asphalt Driveways & Resurfacing in Wylie while the crew is out.
Get a free estimate on Custom & Geometric Windows in Wylie
We come out, measure every opening, template the shapes, and hand you a written line-item estimate covering units, glass, labor, and permit scope. No pressure, no surprise numbers. Call (888) 426-8078 to schedule; a live person answers any time, and we’ll confirm what your job needs and roughly how long fabrication will take. From Windows & Doors to the framing behind them, we handle the scope in one written agreement.
Written by the team at Groundwork Construction Co.












