







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Seagoville: What It Actually Costs and How Long It Takes
Backsplash, tile & flooring work in Seagoville typically runs $14,000 – $45,000 for a full kitchen tile and flooring package, with a standalone backsplash at $800 – $2,500 and countertop-to-floor tile work landing in the middle. A backsplash alone takes two to three days; tile flooring across a kitchen and adjoining rooms runs five to eight working days. Call (888) 426-8078 for a free on-site estimate with a written line-item quote before anything gets torn out.
How the job actually runs, day by day

Tile work is unforgiving of shortcuts. The sequence below is the one we hold to on every Seagoville job, and it’s the reason a proper tile install looks the same in year ten as it did in month one.
Stage 1: Measure, template, and lock the material order (days 1 – 2)
We measure every wall and floor plane, check for out-of-square corners and slab level, and template the backsplash around outlets, window returns, and range hood cutouts. You pick tile, grout color, trim profile, and layout at this point, not later. Material lead times in the Dallas market run three to ten days for in-stock porcelain and up to three weeks for special-order stone or long-format tile, so the order goes in before demo starts.
Stage 2: Demo and substrate prep (days 3 – 4)
Old backsplash, laminate, vinyl, or failing ceramic comes out. What’s underneath decides the next step: drywall in good shape gets skimmed and waterproofed; damaged drywall or a slab with cracks gets replaced or leveled first. We set backer board on floors and a waterproof membrane behind wet-area backsplash. This is the stage that gets skipped by cheap bids and the stage that causes tile to pop loose two summers later.
Stage 3: Layout and dry-fit (day 5)
We snap layout lines and dry-fit the first course so you can see the grout joints, the pattern direction, and where cuts land before any thinset is mixed. You approve the layout. Changes after this point mean re-cutting tile, which costs money and time.
Stage 4: Setting tile and grouting (days 5 – 9)
Floor tile goes down first, then wall tile, then backsplash. Thinset cures overnight; grout goes in the following day; sealant on natural stone follows after a full cure. A kitchen-plus-hall floor at 300 square feet runs about three setting days. Backsplash at 30 to 40 square feet is a single day plus grout.
Stage 5: Final walkthrough and punch list (day 10)
We walk the job with you, check grout lines, caulk at counter and cabinet transitions, outlet plate alignment, and floor transitions to adjacent rooms. Anything on the punch list gets fixed before we call it done. Every project carries the 730-Day Done Right Promise, so if a tile lifts or grout fails inside that window, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that actually matter
Most of the cost swing in a Seagoville tile and backsplash job comes from four decisions. Here’s the honest read on each.
- Porcelain vs. ceramic floor tile: Porcelain is denser, handles moisture and slab movement better, and is the right call for kitchens. Ceramic is cheaper per square foot but chips at edges and shows wear faster. For a home you plan to keep, porcelain pays for itself.
- Natural stone (travertine, slate, marble): Beautiful and unique, but porous. North Texas clay movement plus stone means grout cracks are more visible, and stone needs resealing every year or two. Budget 20 – 40% more in material and maintenance.
- Backsplash format: Standard 3×6 subway tile is the least expensive and most forgiving of imperfect walls. Large-format 12×24 or slab backsplash looks sharp but demands near-perfect wall flatness, which adds prep cost. Mosaic sheets are quick to set but show grout haze if not sealed properly.
- Grout and sealant: Sanded cement grout is standard. Epoxy grout costs more upfront but resists staining and doesn’t need sealing. In a kitchen where grease and tomato sauce hit the backsplash, epoxy is worth the upgrade.
On the finishes side, brands like Therma-Tru and ES Windows come up when a tile job pairs with a door or window replacement on the same wall. We coordinate those trades so the tile meets a properly set frame, not a rough opening.
What Backsplash, Tile & Flooring costs in Seagoville, TX

The lead range for a full kitchen tile and flooring package in Seagoville is $14,000 – $45,000. Here’s how the pieces break out so you can see where your money goes.
| Scope | Typical Seagoville range |
|---|---|
| Backsplash installation only | $800 – $2,500 |
| Kitchen floor tile (150 – 300 sq ft) | $2,500 – $6,500 |
| Backsplash plus kitchen floor | $3,500 – $9,000 |
| Full kitchen tile and flooring package | $14,000 – $45,000 |
What pushes a job to the low end of $14,000: standard porcelain tile, existing subfloor and walls in good shape, no plumbing or electrical relocation, and simple rectangular layout. What pushes it to $45,000: large-format or stone tile throughout, slab leveling, moving an outlet or gas line to fit the new backsplash layout, extended flooring into adjoining rooms, custom mosaics or accent bands, and additional scope tied to a Kitchen Remodeling in Seagoville where cabinets and countertops are also changing.
A written estimate includes demo, substrate prep, waterproofing, tile, thinset, grout, sealant, and labor. It typically does not include structural repair if demo reveals a rotten subfloor, appliance disconnection, or moving plumbing. We flag those possibilities before demo so there’s no surprise invoice mid-job. Upfront pricing means the number you see is the number you pay, and 0% financing for 18 months plus $1,000 off projects over $10,000 is available on qualifying jobs.
See the difference
Before
After
Before
After
Before
AfterWhy Seagoville homes make this job different
Seagoville sits on the Dallas – Kaufman county line where Blackland Prairie clay soils swell and shrink with every wet-dry cycle, so slab movement is a real factor in tile work here in a way it isn’t in cities on more stable ground. In the older brick ranch homes along US 175, we see cracked ceramic floors and tile that has popped off backsplashes more often than in newer construction, and the cause is almost always slab or wall movement underneath, not the tile itself. That means a proper install here starts with a level check and, if the slab is out, a crack-isolation membrane before a single tile goes down. Homes on the east and south edges of Seagoville, built in the 2000s and later tract subdivisions, usually have flatter slabs but thinner builder-grade backer board behind the backsplash and floor, which we upgrade during demo. Because Seagoville straddles the county line, permit requirements and inspection timing can differ block to block depending on which side of the line the lot falls. We confirm which county’s jurisdiction applies before scheduling inspection, so nothing sits idle waiting on the wrong office.
Homeowners in Seagoville often pair this with a Tub-to-Shower Conversion in Seagoville or Vanities, Tile & Fixtures in Seagoville when both bathrooms and the kitchen are getting finished at the same time, and we cover the full Seagoville area including Balch Springs, Mesquite, Sunnyvale, and Rowlett.
Serving Seagoville, TX – Our Local Coverage Area
We serve Seagoville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Backsplash, Tile & Flooring in Seagoville

A standalone backsplash takes two to three working days; a full kitchen tile and flooring package runs eight to twelve working days. Demo, prep, dry-fit, setting, grouting, and final walkthrough are all separate stages, and special-order tile can add a week or more to the front end. Call (888) 426-8078 for a schedule built around your material lead time.
Cosmetic tile and backsplash replacement usually doesn’t require a permit, but any job that moves plumbing, gas, or electrical does. Because Seagoville straddles the Dallas – Kaufman county line, which office issues the permit depends on the lot. We confirm jurisdiction and pull permits where required so inspection doesn’t hold up the final walkthrough.
Yes, and that’s how most Seagoville backsplash jobs run. Keeping the existing outlet locations and cabinet layout is what keeps a backsplash in the $800 – $2,500 range. Moving an outlet or relocating a gas line adds electrical or plumbing scope and pushes cost up. We walk the wall with you before demo to show exactly which cuts and moves are avoidable.
The full package runs $14,000 – $45,000 depending on tile grade, square footage, slab condition, and whether the job is part of a wider kitchen remodeling project. Backsplash alone is $800 – $2,500. A written line-item estimate before demo locks the number, and 0% financing for 18 months helps spread the cost.
Every tile and backsplash job is covered by the 730-Day Done Right Promise. If a tile lifts, grout cracks from anything other than foundation movement, or a joint fails within that window, we come back and make it right. Our technicians bring up to 12 years of tile experience to the job.
Get a free tile and backsplash estimate in Seagoville
Call (888) 426-8078 for a free on-site estimate on backsplash, tile & flooring in Seagoville. We measure the space, check the slab and walls, and walk you through material choices and a written line-item quote before any work starts. Calls are answered by a live person 24/7, and every estimate covers upfront pricing with no surprises.
Written by the team at Groundwork Construction Co.












