







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Garland: What It Costs and How Long It Takes
A walk-in shower remodel in Garland typically runs $9,000 – $28,000, and a single shower installation on its own lands between $4,500 and $12,000 depending on size, tile, glass, and whether we’re moving the drain. Most Garland showers are finished in 2 – 3 weeks from demo to final walkthrough. Call (888) 426-8078 to schedule a free on-site estimate with a written line-item quote.
How a Garland Shower Project Actually Runs, Day by Day

We break this job into five stages. Here’s the real sequence, including the decisions you’ll make at each one and roughly how long it takes.
Stage 1 – Estimate and design (one visit, 60 – 90 minutes). We measure the existing shower, look at the framing and drain, and confirm what’s behind the wall before pricing anything. You’ll pick a pan type (pre-formed acrylic or tile-over mortar bed), tile direction, and whether you want a niche, bench, or grab bars. Groundwork customers get the design consult free with the estimate, and we hand you a line-item quote so you know what every fixture and labor line costs. This is also where we flag anything that will need a permit, like a relocated drain or a changed wall.
Stage 2 – Demo and inspection (day 1 – 2). We protect the floor, pull the old pan and tile, and open the wall around the valve. This is the stage that surprises people. Behind an aging Garland shower you may find wet-set mud, original 1960s drywall, or a drain that’s been repaired twice. Our technicians have up to 12 years of experience and know how to read what comes out. If we find rot or a soft subfloor, you get a written change order before anyone keeps going – no surprise line items later.
Stage 3 – Rough-in and waterproofing (day 3 – 5). Rough plumbing gets reworked and inspected if the scope requires it, then we set the shower pan and apply the waterproof membrane. This is the most important step in the whole job and it’s the one you can’t see when it’s done. We give it a full cure before tile goes on. Skipping a 24-hour flood test is where cheap shower jobs fail six months in.
Stage 4 – Tile and glass (day 6 – 12). Tile setting, grout, and curing take the bulk of the schedule. Glass is templated after tile is set, then fabricated and installed – usually a 5 – 10 day lead time on custom enclosures. Frameless glass runs longer than framed. You’ll decide on the glass spec by the end of week one so the template order doesn’t stall the finish.
Stage 5 – Trim-out and walkthrough (day 13 – 15). Shower valve trim, drain cover, caulk, and a full water test. We walk the job together, show you the waterproofing photos from stage 3, and leave the warranty paperwork. Everything we do is covered under the 730-Day Done Right Promise – if it’s not right, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Walk-in shower design comes down to five or six calls, and each one has an honest trade-off.
- Acrylic pan and wall kit vs. tile-over sloped pan. Acrylic is faster, comes in around $4,500 – $6,500 installed, and cleans up with a sponge. Tile runs $9,000+ but gives you a custom size, a real curbless look, and better resale in Garland’s older neighborhoods where buyers expect a finished shower.
- Curbless vs. low-curb entry. Curbless is the accessible option and the most requested in 75040 and 75041, where many owners are aging in place. It requires recessing the framing for the drain – that adds structural work and cost. A low 4-inch curb is much cheaper and works for most households.
- Tile material. Porcelain is durable and the most cost-effective at $8 – $15/sq ft. Natural stone (travertine, marble) looks richer but needs sealing every year or two and runs $15 – $35/sq ft. Large-format 24×48 tiles mean fewer grout lines and less scrubbing.
- Glass. Frameless 3/8-inch tempered glass is the premium call and adds $1,500 – $3,000. Framed glass is cheaper and easier to align. A fixed panel with an open entry is the least expensive enclosure option and is often what works in a small shower.
- Fixtures. Moen and Kohler both make reliable thermostatic valve-and-trim sets that hold up in North Texas hard water. A rain head plus a handheld on a slide bar is the current standard; a body-spray panel adds $800 – $1,500 and needs its own rough-in.
- Bench, niche, and grab bars. Each is a small add-on in the $300 – $900 range and worth deciding before tile, not after.
If the shower is part of a larger scope – new vanity, floor tile, lighting – that’s a full Bathroom Remodeling in Garland project, and the pricing works differently because trades overlap. For shower-only work, our Bathroom Remodeling service page covers the wider range of what we handle.
What Walk-In Showers & Shower Remodeling Costs in Garland, TX

Here’s the pricing we quote across Garland. The line range for this job is $9,000 – $28,000, with a standalone walk-in shower at $4,500 – $12,000.
| Line item | Typical range |
|---|---|
| Walk-in shower installation (standard) | $4,500 – $9,000 |
| Walk-in shower, custom tile + frameless glass | $9,000 – $12,000 |
| Curbless conversion (recessed framing) | +$1,200 – $3,500 |
| Frameless glass enclosure | $1,500 – $3,000 |
| Full shower + vanity + floor tile remodel | $9,000 – $28,000 |
Four things push the number toward the high end. Size and layout – a 36-inch shower costs less than a 60-inch double-entry. What’s behind the wall – rot, old mud-set backing, or a soft subfloor adds labor. Relocated plumbing or structure – moving a drain or valve on a slab means cutting concrete. Material grade – natural stone and custom glass climb quickly. Garland’s expansive clay is the wildcard; on a home that’s shifted, we sometimes have to correct a sloping slab before tile is set.
A written Groundwork estimate includes demo, waterproofing, tile, fixtures you select, and cleanup. It excludes structural repair discovered mid-job (quoted in writing first) and out-of-scope trades. Every quote is upfront pricing – the number you see is the number you pay. If the project exceeds $10,000, you get $1,000 off, and 0% financing for 18 months is available.
See the difference
Before
After
Before
After
Before
AfterWhat Garland Homes Specifically Do to This Shower Job
Garland’s housing stock splits hard by era, and that split changes the job. In the older core around the 75040 and 75041 ZIPs and the original 1950s-60s subdivisions near downtown, you’re opening walls on small brick ranches where the plumbing is original galvanized or early copper, the drain is often mud-set, and the shower was typically a tub-shower combo set in a 5×7 bathroom. That means a walk-in shower usually involves framing changes, a relocated valve, and sometimes a slightly undersized electrical service if you’re adding a heated floor or a lighted mirror. Out toward the newer ZIPs, the showers are shower-only but builder-grade – acrylic pans and fiberglass surrounds that crack at 15 years. We replace those with tile and proper waterproofing as a straight swap.
Clay soil matters here. North Texas Blackland Prairie clay swells in wet springs and shrinks in hot, dry summers, and showers are set on that same slab. When the slab has moved, the shower pan slopes wrong and water pools toward the wall instead of the drain. Before we set a pan, we check the slope and correct it if needed. That’s a Garland-specific step, because a shower that constantly holds water is the single most common recurring issue we get called back for. Garland runs its own inspections rather than deferring to Dallas County, so if the scope includes plumbing or structural changes, we pull the permit and meet the inspector on site.
Coverage includes every Garland ZIP and the neighborhoods around downtown, Firewheel, and the older ranch corridors off Garland Road and Broadway. If you’re outside the city line, see our Garland service page for what we cover. Homeowners often pair a shower project with a Roof Replacement & Installation in Garland after a hail year, or upgrade to Metal Roofing in Garland while they’re already planning exterior work.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Garland

Most Garland walk-in showers take 2 – 3 weeks from demo to final walkthrough. Custom frameless glass adds 5 – 10 days for templating and fabrication, so the realistic schedule is 3 – 4 weeks on a fully custom build. Call (888) 426-8078 and we’ll give you a schedule with your estimate.
You need a permit whenever the scope changes plumbing, electrical, or structure – for example, relocating the drain or valve, or converting a shower to curbless with recessed framing. A straight tile replacement over existing plumbing usually doesn’t. We confirm the permit requirement during the estimate and pull it for you when it’s needed.
Yes. A same-footprint shower replacement runs $3,000 – $8,500 and doesn’t require opening the slab or reframing. If you want a larger shower, a curbless entry, or a drain in a different spot, that’s the point where plumbing and structure come in – and we’ll explain exactly what it costs before work begins.
A standalone walk-in shower in Garland costs $4,500 – $12,000. A full shower plus vanity and floor tile project runs $9,000 – $28,000. Call (888) 426-8078 for an exact quote – estimates are free and include a written line-item breakdown.
Every Garland shower project is backed by the 730-Day Done Right Promise. If anything isn’t right, we come back and fix it. The tile, waterproofing, plumbing, and fixtures are all covered for the full two years.
Get a Free Walk-In Shower Estimate in Garland
Call (888) 426-8078 to schedule your free on-site estimate for Walk-In Showers & Shower Remodeling in Garland. A live person answers 24 hours a day, and a background-checked technician arrives in uniform. We measure the space, show you tile and glass samples, explain what’s behind the wall, and hand you a written line-item price with a real timeline. No pressure, no vague “it depends” – the number you see is the number you pay.
Written by the team at Groundwork Construction Co.












