







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sliding & Patio Doors in Garland: What the Job Actually Involves
Replacing a sliding patio door in Garland typically runs $1,900 to $5,400 per unit installed, and most standard swaps are a one- to two-day job once the door is on site. A sliding door in a tight alley-load or townhome setting adds a half day, because the crew is carrying glass through a narrow gate instead of across an open yard. Call (888) 426-8078 and we’ll schedule a free on-site estimate so you know which side of that range your opening lands on.
Stage by stage: how a sliding or patio door replacement actually goes

We break every patio door job into five stages, and you’ll make a decision at three of them. Here’s the real sequence, not a marketing version of it.
Stage 1 – Measure and look at what’s behind the trim (day one, 60 to 90 minutes)
We pull interior casing and check the rough opening against the existing door. On Garland ranches from the 1950s and ’60s, that’s where we find out whether the header is true, whether the threshold has been shimmed to hide a settled slab, and whether the house has already been re-sided once. You decide nothing here yet. We photograph what we find and put it in the quote.
Stage 2 – Confirm the spec and order (day one, 20 minutes with you)
This is your first real decision: sliding patio door versus a hinged or multi-panel unit, glass package, frame material, and whether the operable panel stays on the left or right. Sliding units need stock widths within an inch of standard, so if your opening is odd, the lead time stretches. You approve the spec in writing before anything goes on order.
Stage 3 – Demo and opening prep (day two, 3 to 5 hours)
The old door comes out, and we inspect the framing, sill pan, and any rot at the bottom corners. This is the stage where Garland jobs near the older downtown core sometimes surprise us: a door that’s been leaking into a brick wall for years has usually rotted the sheathing behind it. We repair framing and flashing now, not after the new door is hung. You approve any repair as a written add-on before we proceed, and the price does not move again after that.
Stage 4 – Set, flash, and seal (day two, 2 to 4 hours)
The new unit gets shimmed level, fastened through the frame, and flashed with a sill pan and proper weather barrier overlap before siding or brick trim goes back. On a townhome or an alley-load lot where the crew is working from a driveway with one parking spot, we stage materials on the protected floor inside and cart everything through. No ladder work over a shared alley.
Stage 5 – Finish, inspect, and hand off (day three, 2 to 3 hours)
Interior casing and trim go back, the threshold gets its sealant bead, we test the roller glide and lock engagement, and we walk the opening with you. If your job pulled a permit, the rough-in inspection typically happens at the end of stage 3 and the final inspection after stage 5. Most Garland patio door replacements close out in two to three working days on site.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll actually make, and the trade-off behind each
Sliding and patio door pricing swings hard on spec, not labor. Here’s what you’re picking between.
- Vinyl sliding doors: the least expensive and the easiest to maintain in North Texas, typically vinyl runs $1,900 to $3,200 installed for a standard 6-foot unit. The trade-off is color: most vinyl lines offer white or a narrow range of laminates, and a 1970s brick ranch in Garland sometimes wants a bronze or bronze-clad look that vinyl can’t deliver.
- Fiberglass or aluminum-clad: $2,800 to $4,600 installed. Better dimensional stability on wide openings and a real color palette. Worth the extra on a unit bigger than 8 feet, where vinyl can bow over time in summer heat.
- Multi-panel and accordion systems: the top of the range, often $4,500 to $7,000 and up depending on panel count and brand. Beautiful on a den-to-patio connection. Heavier, so the header and track have to be right, and these need manufacturer-trained installation to hold their warranty. Andersen and Pella both make lines worth pricing here.
- Glass package: dual-pane low-E with argon adds $200 to $600 per unit and is standard on most Garland jobs simply because of our summers. Laminated impact-rated glass adds more, but it’s a genuine hail- and wind-borne-debris upgrade that some homeowners ask for after the last storm.
- Rolling-code remotes and smart locks: a keypad or app-controlled deadbolt on the sliding panel runs $180 to $450 installed. If you’re adding a smart lock, we test the door’s lock engagement with the new hardware before we hand off, because a sliding panel that sits a quarter-inch off will jam a deadbolt in a week.
If you’re considering a broader assembly of openings, homeowners frequently price the patio door alongside our Windows & Doors service so the whole scope sits on one line-item quote.
What Sliding & Patio Doors costs in Garland, TX

Expect $1,900 to $5,400 for a standard sliding patio door installed, and $5,500 to $9,500+ for a wide multi-panel or accordion system in a larger opening. Here are the line items that actually move that number:
| Scope line | Typical range |
|---|---|
| Standard vinyl sliding door, removed and replaced | $1,900 – $3,200 |
| Fiberglass or aluminum-clad replacement | $2,800 – $4,600 |
| Wide multi-panel or accordion system | $4,500 – $7,000+ |
| Rotted framing, sheathing, or sill repair | $300 – $1,200 |
| Widening the rough opening / header work | $1,200 – $3,500 |
| Smart lock, keypad, or rolling-code remote | $180 – $450 |
| Permit and inspection (where required) | varies by scope |
Five variables push a Garland job to the low or high end. Door width is the biggest: a standard 6-foot slider is stock, an 8-foot or wider custom unit adds weeks of lead time and dollars. Condition behind the trim – rot, rust, or a settled threshold – is the second. Whether the opening changes size determines header and framing work. Glass and frame grade accounts for most of the spread between a vinyl unit and an accordion system. And permit scope matters: a like-for-like replacement usually doesn’t trigger one, but anything that alters the rough opening or structural framing does.
Every estimate we hand you is written line by line, so repairs and add-ons are itemized before work starts. The number you see is the number you pay, with no change orders unless you approve them in writing. Given Garland’s range of eras, you’ll find that older homes in particular benefit from a paired look: if you’re spending on the patio door and the yard is next, homeowners often pair this with Fence Repair in Garland.
See the difference
Before
After
Before
After
Before
AfterWhat Garland homes specifically do to this job
Garland is a post-war streetcar suburb that grew into a full city, and its building stock splits sharply by era. The older core around the original 1950s and ’60s subdivisions in ZIPs 75040, 75041, and 75042 sits on concrete slabs poured over Blackland Prairie clay, while the 1970s-’90s additions out toward 75043 and 75044 handle framing and drainage differently. That distinction matters more than most homeowners expect: on a mid-century ranch near downtown, we regularly find a patio door threshold that was shimmed up to hide a settled slab, so the door has been fighting an out-of-level opening for years. The fix isn’t a new door – it’s addressing the shim and the sill pan before we hang the unit. Out in the newer subdivisions, the door usually sits true, but we see a different problem: aluminum sliders original to a 1980s build whose rollers have shed their nylon bearings. A flooring-and-grading detail from the wet spring season runs through the older lots too – poor exterior drainage lets water stand at the threshold and rust the sill pan from underneath. Garland also runs its own inspections and permitting rather than deferring to Dallas County, so any opening change or structural work needs the city’s sign-off. We cover the whole city on our Garland service-area page, including Windows & Doors in Garland work when the patio door is part of a full opening-by-opening replacement.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Sliding & Patio Doors in Garland

A standard replacement takes two to three working days on site: one day for measure and spec, one to two for demo, install, and finish. A custom width or a multi-panel system can add two to four weeks to the calendar because the unit has to be built. Call (888) 426-8078 for a free estimate and a realistic timeline for your opening.
A like-for-like replacement in the same rough opening usually doesn’t require a permit. Anything that alters the opening size, removes structural framing, or changes a header does need one, and Garland handles its own inspections. We’ll tell you up front which side of that line your job falls on, and we pull the permits and pass the inspections on scope that needs them. Call (888) 426-8078 to talk through your project.
In most cases, yes. A patio door replacement stays within the door opening, so plumbing and electrical runs rarely come into play unless your unit is a garage-to-yard conversion or the wall behind the patio door carries a switch or outlet. We check that during the measure visit and flag it in the quote. Call (888) 426-8078 to schedule your free on-site estimate.
Most Garland jobs land between $1,900 and $5,400 installed, with vinyl at the low end and wide fiberglass or aluminum-clad units toward the top. An accordion or multi-panel system in an expanded opening runs $5,500 to $9,500 or more. Rot repair, header work, and smart hardware push the number upward. Call (888) 426-8078 for an exact line-item quote – estimates are free.
Manufacturer coverage runs from 10 years on most stock vinyl doors up to lifetime on premium frames, and it’s separate from workmanship. Our installation carries the 730-Day Done Right Promise – if the install isn’t right, we make it right for two full years. If your door and your yard are both on the list, homeowners often pair this with Paver Driveways in Garland.
Ready to price your patio door in Garland?
We’ll come out, measure the opening, check the framing and sill pan, and hand you a written line-item estimate for your sliding or patio door. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and we stand behind the install with the 730-Day Done Right Promise. Call (888) 426-8078 – a live person answers around the clock – and we’ll set your free on-site estimate at a time that works for you.
Written by the team at Groundwork Construction Co.












